咖啡杯 - 小发明玩具

A fidget toy in the form of a mug of coffee. All models are printed without supports. I added the 3MF Bambu Lab and Creality files.
Model Description:
STL Mug is a mug with no lettering.
STL Mug (coffee) is a mug with an inscription.
STL Handle is the handle of the mug.
STL Coffee Whipped Cream is coffee with whipped cream. For multicolor printing, print the first 30 layers in dark color and the remaining layers in white (layer height should be 200 microns ). This model can be printed without supports, but if your printer does not print bridges well you can use supports.
STL Frothy Coffee is a coffee with crema. For multicolor printing, print the first 30 layers in dark color, the remaining layers in white (layer height should be 200 microns ). This model can be printed without supports, but if your printer does not print bridges well you can use supports.

You will need keyboard switches and glue to assemble this model. The keyboard switches you need to make your mug click.
Instruction:
To make your clickers click you need the keyboard switches.

Don't forget to cut the pins before installation.

If the side walls are in the way, you can cut them off.

Install the handle of the mug in the hole, don't forget to use glue.

You can also put the key ring on the mug handle first and only then install the mug handle in the hole. Don't forget to use glue.

Install the keyboard switches into the hole in the model body. To make your keyboard switches stick well you can use glue.


Install the cover on the keyboard switches.


To print the lettering multicolored you need multicolor printing equipment.

If you don't have multicolor printing equipment, the lettering on the mug will be the same color.

Don't forget to share your prints

If you have any problems, please email me

All my models are for personal use only

Don't forget to subscribe to me

All of my designs are protected by copyright law. Your purchase does not authorize you to distribute or sell digital files or printed models of my designs without my express written permission To legally sell my fidget toy designs, please visit my Patreon page:
http://patreon.com/IX_Stvdio

Layer height - 200 microns
Perimeters - 2 layers
Filling - 15%