钻床卡盘键串线器/夹具 专为 TPU/FLEX 长丝设计

Never lose your Chuck key again and no broken string or wire.

At work we were using string, electrical wire or even some metal wire to attach the chuck to the drill press so we don't lose or misplace it but these attachment methods always break after a few months of use. Having use TPU in other projects and seeing how strong and durable it is I give it a try for the task at hand. I was not disspinted.

I have made it available in 3 different lengths.
They are approximately :
Long................6 feet
Medium............4 feet
Short...............2 feet

As mentioned, these are to be printed in a flex filament.

Whatever settings you would use for printing TPU/Flex

On my Prusa MK3.5s 0.4mm I used the following settings:
Overture TPU
Sainsmart TPU profile
Fans off
19 Perimeters (yes its all experimenters but you can use infill too)
0.3 Layer height
100% infill if not using all Perimeters
No supports required

Textured sheet or glue on a smooth sheet for easier removal.
TPU really likes to stick to the bed.