鸢尾花小发明盒

This is a container with a unique opening mechanism.
Twist the bottom of the container to activate the five sliding petals.
Very Fidgety.

If you want to take inspiration from the mechanism, reverse engineer it, remix it and/or integrate it's principle of operation in your own design, feel free to do so. I'd love to see your take on this thing.
Only do so if you can cad the mechanism from scratch.

print out the parts:
Lid x 5
Container x 1
Bottom x 1
Ring x 1

• FDM print.
• Material: PLA or any hard plastic.
• Layer height 0.16
• Nozzle Dia. 0.4
• Infill ~20%
• Wall thickness 2 - 3 passes.
• Arrange the parts on the print bed as shown in the attached image.
• Support: Regular support. support only from print bed. critical angle 30
• Activate brim (~4mm all around)

Assemble the parts. refer to the attached image for assembly.
- Slide the 5 lid parts into the slots in the container half way in.
- Slide the external ring over the container.
- Slide the ring all the way up to engage the gear teeth of the lid parts and the ring. make sure that all the lid parts move together.
- Click the bottom into place.
- Enjoy.

This model is also suitable for resin printing and powder printing.