Hi, I found your design for the MDF Gaggia very interesting. may i ask how you printed it to get enough stiffness ? I have an ultimaker S5
- 0 beğeni
👋 Herkese merhaba! Bu konu herkese açık olduğundan nazik ve saygılı davranalım. Reklam, spam veya kötü şeyler olmasın!
🇩🇪 Kullanıcının ülkesi: Almanya
🌐 Üyenin tercih ettiği dil: Almanca. DeepL aracılığıyla çevrim içi çeviri yapabilirsin.
💡 Belirli bir modelden mi bahsediyorsun? Bağlantıyı, başlığı veya model numarasını ekle.
🖼️ Fotoğraf göndermek️ ister misin? ImgBB gibi ücretsiz bir host kullan ve bağlantıları mesaja yapıştır.
✍️ Yazma İpuçları: Metnini yapılandırmak ve daha okunabilir hale getirmek için Markdown formatını kullan.
Mesajını yaz:
5 yorum
Hello, I just printed it with normal settings on a Bambulab so it should be working with an ultimaker. You have to disassemble your Gaggia MDF and put the inner parts in the printed Case. Ist is very stiff and works now for a few month.
- 0 beğeni
Hi there; i'm very much interested in the gaggia MDF model. It looks just perfect!
Do you have more fotos of the print? Especially the inside and how the funnel is solved?
Are there more details regarding that that you could provide?
Thank you!
- 0 beğeni
Hello, I have no more photos because my mdf is assembled and in use. The inside is pretty empty. Just three screwholes for the internal parts and some air louvers at the back. The funnel is just a straight pipe attached to the mill. So there is still some place where coffee remains in the mill.
- 0 beğeni
I uploaded one photo from the inner parts that I found
- 0 beğeni
Very cool, thank you!
So basically one would disassemble the original one and just screw the inner parts into your design, right? Nothing else needed, corrent?
That some ground coffee remains inside and is pushed out by the next one is pretty normal i'd say. But the straight pipe is attached to the mill in a way so that no ground coffee should fall down on the inside, right?
Last but not least: How did u print it that it became so flush and pretty; or did un sand it afterwards?
- 0 beğeni
Hi!
I hope you are getting notifications here
I downloaded Automatic portafilter cleaning device on printables and the bucket part seems to be an earlier version, can you take a look?
It doesn't fit the inlay
- 0 beğeni
Hey do you by any chance have some assembly guide or parts list(how many of each part)? Or any usefull Tips?
Thanks in advance
- 0 beğeni
hey here is an assembly video: https://www.youtube.com/watch?v=jW4_7FFml3w
- 0 beğeni
Hello. I am interested to print Gaggia MDF that you made. Can you please tell me how many grams of material it uses and how long it takes to print? Thanks