/https://fbi.cults3d.com/uploads/user/avatar/13737131/Eleton_Logo.png "E-leton"){kind=logo}
Hi! could you do me a huge favor and measure the assembled skeleton nose to tail for the default file print size? I am trying to scale my print to fit in a plush toy.
Thank you!
👋 Herkese merhaba! Bu konu herkese açık olduğundan nazik ve saygılı davranalım. Reklam, spam veya kötü şeyler olmasın!
🇮🇱 Kullanıcının ülkesi: İsrail
🌐 Üyenin tercih ettiği dil: İngilizce. DeepL aracılığıyla çevrim içi çeviri yapabilirsin.
💡 Belirli bir modelden mi bahsediyorsun? Bağlantıyı, başlığı veya model numarasını ekle.
🖼️ Fotoğraf göndermek️ ister misin? ImgBB gibi ücretsiz bir host kullan ve bağlantıları mesaja yapıştır.
✍️ Yazma İpuçları: Metnini yapılandırmak ve daha okunabilir hale getirmek için Markdown formatını kullan.
Mesajını yaz:
53 yorum
The Skeleton looks a bit bigger than a regular home cat skeleton. From my messurments - 110cm long (with tail strait) & about 40cm high
- 0 beğeni
Hello, I wanted to ask how I could download the mockup in any of these three files, STL, obj, 3mf
What do you mean by Mockup? Full body sl with Joints? I cant Export is (dodn't upload it to there - couse you have the pictures to assembly). If you want I can export the whole cat as one OBJ\STL - send me an email to :eleton.designs@gmail.com
- 0 beğeni
Hello, I recently bought the cat skeleton. In the pictures there is the 3d-model of the assembled cat, but that model is not part of the package. Is it possible to get the full model as stl/obj/blend whatever?
Thank you
Fabian
Hey, can export it as a whole model with all connectors but it ment to be with Joints as different parts so don't know if it'll print all right as one object
- 0 beğeni
That would be absolutely fine, it is more about the overall size of the cat and relationships of the joints. I plan to build an animatronic cat and need a good reference where the actual joints should be and for the general structure.
- 0 beğeni
Send me a mail to eleton.designs@gmail.com & I'll export it for you
- 0 beğeni
Hello! On the articulated cat skeleton, one of the legs has a random tube connected to it that lifts the entire file off of the print bed. Is there a reason for this tube?
- 1 beğeni
I will check that! maby some support tube came down. what is the name of the part?
- 0 beğeni
Thanks for responding! Unfortunately, I can't tell you the exact name of the part, as they import as one piece unless I separate the objects out. It seems to be one of the front legs, but I can't tell which one.
- 0 beğeni
Send me a picture to eleton.designs@gmail.com - that way I can know the part. Thanks
- 0 beğeni
Buongiorno vorrei sapere quale viti usare fer fissare le dimensioni e il modello grazie
- 0 beğeni
Are you talking about Avata Mount? 12mm M2
- 0 beğeni
Hello, I bought your cubic skull and noticed a lot of the STLs are bundled pieces. Some
Of the pieces are not printable without applying supports, which is a little annoying. Just wanted to ask if you have the pieces on an individual STL level, instead of bundled before I go through and separate each piece.
Thanks in advance!
- 0 beğeni
Hey! Made all raw part as one - you can easly Separate them in every slicer by doind "separate to objects". Send me a mail to: eleton.designs@gmail.com & I can send you the peaces separated. Indeed some of the parts needs sypports (auto support will do the work) Already Placed them as needed on plate
- 0 beğeni
I’ve been separating them utilizing slicers, some of them like bambu labs will crop or mistake some parts when they’ve been separated. I’ll email you now!
- 1 beğeni
Sent you the files! Hope it helps
- 0 beğeni
Hello! Can you do Winnie the Pooh?
https://ibb.co/4w93ShV8
- 0 beğeni
Already on that too 😂 in dilemma of: how Piatachok will stand on that small legs 😂 will upload Puh & Piatachok next week
- 1 beğeni
Hello! Can you make figures from the cartoon "Wait a minute"? Wolf and hare.
https://ibb.co/rfyWBKCW
- 0 beğeni
Lol! I’ working on them just right now! They are my childhood cartoon too!!! Didnt know that they where in other contries! Will upload them next week! Stay tooned
- 1 beğeni
Uploaded the wolf! Hare will come tommorow
- 0 beğeni
Hello! The wolf is super! I'll be looking forward to it and buy it right away!
- 1 beğeni
Good afternoon! Very cool figures. I bought it. Thank you very much!
- 1 beğeni
Thank you! Update with Print pics!
- 0 beğeni
Hello! Please email me a separate eye for the hare. I'll be grateful!
Kstgoryanov@gmail.com
- 0 beğeni
Hey, eyes - are the only part to paint (manually) - because of it size (small part) it would be really hard to print and assemble. But will make one for your testing. Will send via mail & update on post
- 0 beğeni
Sent & Updated
- 0 beğeni
Hello, I like your skull art, can you make me a price for all your STL file?
- 1 beğeni
Thank you! The prices are pretty low already - if you want to buy them all can make you a discount code. What Discount are you looking for?
- 0 beğeni
up to you
- 0 beğeni
Write me an email to: eleton.designs@gmail.com
I'll provide discount code for you
- 1 beğeni
Hello! For your Hexagon Skull. Do you happen to have all of the "-c" parts without the drawers cut into them? I plan to just glue all of the pieces in and will not be using the drawers at all, and they would print faster with less plastic if the drawer features weren't there.
Thanks!
- 0 beğeni
Hey, No I modeled them with thinness. But it'll save you some filament to print them like that
- 0 beğeni
Got it, thanks!
- 1 beğeni
Hi I just downloaded the skull with drawers and I maybe looking at the stl's wrong but there dosent seem to be any draws in the stl's. Cheers.
- 0 beğeni
Hey, all the parts with “-c” in the name are drawers (nexagon parts with space in them)
- 0 beğeni
Hello, I bought the Build Blocks skull model, but I'm having problems, some block stl files simply don't generate a proper G-gode. I tried Cura Slicer, Creality Print and BambulabStudio without success. The same blocks are defective in all these slicers. I also imported some blocks into fusion360 and realized that the geometry is not a single watertight body. I see that you were able to print and of the two users who posted their prints, one of them apparently printed without problems and the other reported the same problems in the comments. In any case, could you give me some advice, which software to use or if I need to do something to be able to print all the blocks. Thanks.
- 0 beğeni
Hello my friend! First of all as you mentioned - the model is 100% printable (many users made their prints, not everyone uploading the results) BUT I'm here to help with any problem!
I made all the slices in BambuLab studio - so can't tell how other slicers will work with it. I really want to help you with bricks that gives you problems - so just make a list and I'll check them (if I can somehow fixe it - shurely will do)
Feel free to send any pictures what do you see in slicer or else on: eleton.designs@gmail.com
- 0 beğeni
bro, this is crazy! billion support. How to properly position and configure this? https://ibb.co/1Jj69gv
- 1 beğeni
Hey! Personally used parted version & glued with Resin together - so there was a small amount of supports. But as you know - SLA supports are fun to remove!
- 1 beğeni
Hello, just curious what you use to take an AI design and make it a 3d figure? I am interested in doing this too.
- 0 beğeni
AI picture was only as a refferance - so just modeled all in Zbrush
- 0 beğeni
I'm having issues with the honeycomb skull. It keeps failing on my resin printer and is leaving sheet like pages of filament in it or just sitting in the cart.
- 0 beğeni
Hey, I didnt print it with Resin (only Fdm printer) but you can send me your Chitubox file to: eleton.designs@gmail.com & I’ll try to help you with supports (will check if everithing ok)
Don’t worry - we will get it printing for you!
- 1 beğeni
Okay, finally figured out what was going wrong. My printed was failing and was never your design. You rock!!
- 0 beğeni
Thanks for update!
- 0 beğeni
I lined pieces 18, 19, 20 up in the slicer by the square hole and piece 19 does NOT fit flush with the bottom of the previous piece
Go into your slicer stack piece 19 over 18 using the hole and you will see what i mean, you need to fix this, there is no point continuing the print until i have a piece #19 that fits onto #18
- 1 beğeni
Hello, the model tested & printed by many users so I think the problem on your side, but don’t worry- we will figure it out! Will RE-check now the files again & update
- 1 beğeni
Just finished checking the files - they are all fine. I think the problem is that you yhought it was a Strait cut - vut there is a angled cut so maby because of that something bothered you :) Anyway - you can print the model with no hesitation. I presonally tested this model couple of times and there are 62 users who printed it (couple of them posted on Instagram).
For your comfort, added in Psycodelic Skull post 3 photos from slicer that shows 17-18-19-20 parts all together with a precise hole there. Enjoy & be possitive !
- 0 beğeni
Update me on your progress - I will glad to hear that everything is good!
- 0 beğeni
I did not think it was straight cut i am not new to 3D printing... if you give me somewhere to send you a photo you will see piece 18 does not line up with 19 via the bottom angled cut AND the square hole, you can tell there is a piece in-between missing
- 0 beğeni
Sure! Send the photo to: eleton.designs@gmail.com
Did you have the time to see the 3 screenshots that I uploaded that shows parts 17-20 alligned? (3 last photos at the post). Once again, don't worry - we will find whats wrong with the slice (be sure I tested it)
- 1 beğeni
I emailed you
- 0 beğeni
Fixed! thanks for the help
- 0 beğeni
Great to hear! There where no problem with the files at the end - just remember to print them with 0.2 Layer high!
- 0 beğeni
Hello
I'm Javier
i love your sketeton on layers and multicolour, my question is I wou dlike to try it, but I had been reading the messages some body complaint (very rude guy) about to big of a file for a startup 3d printer. i read you can give more basic version, also how you do the white teeth. in any case since you print in layers i thibnk should be fine anl the white tooth make me wonder about, thanks for ur time
- 1 beğeni
Hey, I think re refeared to another file that was Too Hight Quiality for his slicer - but I uploaded "lowered quality stl" there.
As I understand you liked the Psycodelic skull- it's really easy print (suggestion to print with 0.2 layer high)
I have multi-color 3D printer (BambuLab X1 with AMS) that I can multicolor print it.
In your case - just print with one color & paint by hand later with white.
Good Luck! I'm here for every question
- 0 beğeni
Does your to bee or not to bee model need supports/raft also it saying it has missing layers that won't print I noticed there are like 4 files which one would be the correct file to slice and print using a fl sun v400 orca slicer
- 0 beğeni
Hello, yes you'll need to print it with Manual Supports from build plate only. Faft can help you with bed adhession - so add too. Use Honeycomb skull [fixed 2] - it's after I reduced numbers of Triangels (that way it easeier for slicers)
- 0 beğeni
Re-organized files. Honeycomb skull [fixed] - for One color print. 3FM file for Multi-color
- 0 beğeni
Hi, I purchased your Psychodelic Skull and started printing it the other day. I got to S11 and for some reason, the first layer is only half the skull. I am curious if it is Cura messing it up or if it is supposed to be like this. Your video didn't show one that was printed this way. https://ibb.co/SwN713C
- 0 beğeni
Hello! First of all - thank you for contributing to my art!
Re-checked the files from S11 and up - everything looks ok (I would really like to help you with that - so feel free to send me screenshot of the problem to: eleton.designs@gmail.com)
- 0 beğeni
The problem was that he tried to print on 0.3 Layer high. My suggestion: 0.2
- 0 beğeni
/https://fbi.cults3d.com/uploads/user/avatar/13764048/ProfilePicOutline.jpg "ChrisLutz")
Hello. I just ran across your cute skeleton model. I'd be interested in giving it a go on a Bambu Lab P1S printer if you need more FDM testing. I would not do it all as one model but as different plates of each color since you already have it split all up. I would also be interested in testing the brick skull. Thanks
- 0 beğeni
Hello Criss, thanks alot for yor interest! All files I tested & printed with Bamboolub X1 Carboon (so they after all the test prints) - feel free to contribute to my art :)
- 0 beğeni
Which program do you use to create the model?
Will there be more of these models?
- 0 beğeni
Hey, using Zbrush, Blender & Fusion 360. Uploading models monthly :)
- 0 beğeni
Perfect thanks
- 0 beğeni
Can I also buy the file from you to change the model just for me personally?
It would be about the СUTE SKELETT file
- 0 beğeni
Yes sure. As ling as it for personal use
- 0 beğeni
what would be the price for the files
- 0 beğeni
Sorry, I think I misunderstood you earlier. The files are for sale for everyone. I'm now willing to make it private for someone.
- 0 beğeni
Axis at what I wanted is the files to edit the possible
- 0 beğeni
So just download the files for 5$ and make for yourself needed changes. That will work :) if you insist - you can tip me ^^
- 0 beğeni
ok then I can modify the STL file in zbrush
- 1 beğeni
The 8 color building block skull has an error on layer 2. There is an extra square skin color instead of a bigger block. It is okay since we just used one of the test pieces instead.
- 0 beğeni
In the middle of the skull I used one more color (couse I did it on teeth) - just print it with any color - they are all in the middle
- 0 beğeni
And yes, you can use the test peaces ofcourse - but I think there will be couple of more rows with "extra" skin color.
The reason for that: wanted to make a Puzzle that there is NO PLACE that 2 colors sit near each other :)
- 0 beğeni
Are we allowed to sell prints of the models that we've purchased? Obviously with acknowledgement to you as the designer & only in their original design. Insert standard 3DP commercial licensing mumbojumbo.
- 0 beğeni
Hello, the models for private use only (i'm printing & selling myself) If you want to get seller permission - write me an email with all the info: eleton.designs@gmail.com and we can disscuss!
- 0 beğeni
Could you review the file for the front legs? This one is not ready to print.
Hello, left some manual unneded support :) deleted it and reuploaded file. Thank you