👋 Herkese merhaba! Bu konu herkese açık olduğundan nazik ve saygılı davranalım. Reklam, spam veya kötü şeyler olmasın!
🇨🇱 Kullanıcının ülkesi: Şili
🌐 Üyenin tercih ettiği dil: İspanyolca. DeepL aracılığıyla çevrim içi çeviri yapabilirsin.
💡 Belirli bir modelden mi bahsediyorsun? Bağlantıyı, başlığı veya model numarasını ekle.
🖼️ Fotoğraf göndermek️ ister misin? ImgBB gibi ücretsiz bir host kullan ve bağlantıları mesaja yapıştır.
✍️ Yazma İpuçları: Metnini yapılandırmak ve daha okunabilir hale getirmek için Markdown formatını kullan.
Hello there from Germany,
I recently bought this awesome set and have lots of fun printing it. Apparently, some parts are missing in folder 'TheedHangar 2'. The two grey parts right above the door are missing - one vent opening (?) and the pipe arrangement above that. Could you please send them trough or a link to download them?
Many thanks in advance!
Best regards,
Stefan
Hello, ShadowRunner2. Thanks for your comment and support. Missing parts are now available. Best regards.
Hello, the file called MG Tie 06TieHook02 doesent work it says that the file does not contain any geometric information
Hello, Airsoft. Thanks for your support. I downloaded the files from the post. it look good on tne slicer. PLease contact me in Isntagram and I will send you the files directly and separated. Best regards.
Hello, no worries i just fixed thank you :)
on yavin hangar MG YH 04WALL03 is the beam and i cant see the wall
Hello, Luis Rios. File fixed. Thanks for your comment. Best regards.
Muchas gracias
Hello, good day. I need your help. I downloaded the Emperor's Throne template, but when I open it in the program I use for laminating, it comes out with enormous proportions, and I don't know how to scale it to the size of the print you show in the images. If you could guide me with the dimensions of a single piece, I could scale it. Please, friend, help me. Thank you very much.
I just purchased this file, and when loading it into Bambu slicer, the files are gigantic. The Razor Crest files I bought load in just fine. Do you happen to have an updated file, or know what percentage to print at in order to fit the MGS ARC 170? Thanks!
Hello, pryme. Thanks for your purchase and support. Surely I forgot to rescale the file. If it is so, you must resize from 100% to 10%. Please let me know. Other wise, i will check as soon as pissible.
Hi,
I purchased the Star Destroyer bridge version one. I was wondering if you could split the main part in half to fit my build to print seperate.
Let me know when you get a chance.
Thanks
Hello, prymety. Thanks for your support and coment. Of course, no problem. Please find me in instagram and send me a pic of exactly what you need. I keep in touch.
ok, will do
Hello: i purchased the Tantive IV Rogue One Vader Attack pack. I attempted to print the Vader Wall 1 piece, but it appears that there is an error in the file. the floor is not fully attached to the Wall section with free floating pieces. an attempt to have this repaired by the slicer failed. Do you have the corrected version of this file?
Files sent to your mail. I keep in touch.
I sent you a picture marking the items that are missing on instagram.
Hello: I recently purchased the Death Star Plans Section of the Tantive 4. I did not receive the left and right side wall that are pictured. The pieces I am referring to look like the archway but without the adjoining upper part that joins the sides together. Can I please receive that file?
Hello, Michael. I checked the file list and all seem to be uploaded. Please find me in Instagram. There we can chat and see what is missing. Best regards.
Can you please provide a link? I can’t find it
I found it. I messaged you on instagram.
Great 👍🏻. Once you text me, I could send you some pictures to check which file is missing.
Hello there how many rolls does it take to build that imperial landing pad ?
Hello, Ricknova. Thanks for your comment. Do you mean the 3.,75 scale? 5 kg, aprox. It is not considered the main landing pad. Best regards.
Ok awesome thank you
Can this imperial landing pad be printed on a 220x220 bed ?
Hello, I was wondering if you could help me with something. I purchased both parts 1 & 2 of the Bespin Dual Diorama. The parts are printing in excellent fashion and have had no problems with the file at all. I was just wondering where the part labeled BDuel2 02MainBaseJoint goes? I have studied the reference photos over and over again and for the life of me I can not figure out where this one large piece goes? Thank you for your time.
Hello, RENEPINEDA. Thanks for your support. The file you mention is the joint to help both A and B part of the main base to join together. Part A and B each have 4 holes. Hope this help to your question. Please find me in Instagram for a better comunication. Best regards. Pd: hablas español?
HI. I just bought your Tractor Beam generator design, but the first file doesn't work. It comes back as empty or error no matter what I try.
Could you please fix it and send me the first batch of files? Great work!
Cheers!
Hello! I just bought the file Star Wars Yavin 4 Watch Tower. I have a doubt about it. I need it for the microgalaxy scuadron, is the scale okey for it?
Hello! I just bought this model: Star Wars Death StarTurbolaser (articulated) por Corellian_Factory. In the pictures I can see some cubes for introducing them into the holes around the tower, I couldnt find those pieces. Could you help me?
Hello, MARCOSS11. Thanks for your purchase and support. The missing file has been added. " DS LT 10". Thanks for your comment. Best regards.
Thank you!
Can I print this on a 220x220 ad5x printer flashforge?
How many rolls of filament does it take to make ?
Hello, Ricknova. Sorry, don't know the model you asking for. I keep in touch.
The endor landing plate
Just the bridge section (length) exceeds the 220x220 bed for 1 or 2 centimeter. And a couple of railhand over the landding pad. So if it needed, I can adjust those files at your request.
Awesome definitely
It's the endor landing platform I apologize I did get back to you sooner
Just wondering how many rolls it takes to build it?
At least 4.5 kgs. Maybe 5. Remember the main plataform is not considerated. Only main Towers, bridges, handrails and lighting towers.
What's the platform made of is it plywood?
I used MDF. 20mm. By far a better option. You can get finished the plataform section in a couple of hour.
Hi, i just purchased the " Star Wars Razor Crest Ship Stand for Micro Galaxy Collection" but the "MG RC Stand01a" file will not load and states "Loading of a model file failed" and "The file does not contain any geometry data", Peter Bullin - peterbullin@hotmail.com
Hello, Peter. Thanks for your purchase and support. The file has been fixed. Thanks for your comment. Best regards.
Hola, pues sería para una escala de 2,5 pulgadas, o sea, unos 6 cm. Gracias!!!!
Ya está disponible la version 2.5 pulgadas del pasillo de Vader. En el mismo post de venta. Quedo atento.
Hola, ¿hay posibilidad de obtener el archivo en una escala menor? A una escala de 2,5''. Gracias!!!!
https://cults3d.com/en/3d-model/game/tantive-iv-rogue-one-section-vader-attack
Hola, Mondieta. Tu dices para figuras de 2,5 cm o pulgadas? Quedo atento.
Bonjour vous vendez le modèle imprimé je n ai pas d imprimante 3d
Hello, Doudou. Im from Chile. Find me in Instagram. There you can see all my works. Best regards.
bonjour , merci pour vos realisations ,cdt Antoine
Thanks, Tony. A pleasure. Let me know if the model need something more. Best regards.
Hi, is it possible that the door blades of the Jurassic Park gate are missing in the download?
Hello, FUZZELHJB. Thanks for your purchase and support. Sorry, the door was missing. Its been fixed. Best regards.
Great thanks!
It's the endor landing pad just wondering what size plate do I need to print it?
If you reduce the scale model to 90%, all files fit in a 220x220 bed. Except for 1 file that I can split in 2. The landing pad must be made of MDF. A cut of 110cm x 60cm. Hope it can help you. I keep in touch.
No prob, just wondering is it for the 3 3/4 figures?
Will my flash forge adx5 print this ? It's a 220 x 220 table
Hello, ricknova2. Sorry. I dont know the model you asking for.I keep ik touch.
/https://fbi.cults3d.com/uploads/user/avatar/14316334/IMG_2722.JPG "Corellian_Factory")
/https://fbi.cults3d.com/uploads/user/avatar/28591007/Logo_CG_Design2.jpg "AirsoftDesigns"){kind=logo}
/https://fbi.cults3d.com/uploads/user/avatar/36403831/LogoModelingRobot.jpg "ModelingRobot")
/https://fbi.cults3d.com/uploads/user/avatar/43398767/FB_IMG_1764599531667.jpg "ricknova")
/https://fbi.cults3d.com/uploads/user/avatar/46370369/FB_IMG_1764599531667.jpg "ricknova2")
Hi there, I recently started printing the Theed Hanger, and I was wondering, on the back curved wall, are there supposed to be two different files? The one has the slits for the side walls ending halfway, but if I want to stack them, the bottom one can't be connected. Specifically MG TH 02MainWall. Just wondering if I am missing it or something along those lines.
Thanks!
Mike
Hello, V-Squared. Thanks for your comment. Please cotact me in Instagram and send me some pics to have and idea of the issue. best regards.
Missing back curved wall added. I keepin touch. Thanks.