3D-EDG is all about jigs to help you make your custom exhausts we have over 30 designs! if there is a specific dimension you require feel free to ask , and I will create one!
👋 Herkese merhaba! Bu konu herkese açık olduğundan nazik ve saygılı davranalım. Reklam, spam veya kötü şeyler olmasın!
🇦🇺 Kullanıcının ülkesi: Avustralya
🌐 Üyenin tercih ettiği dil: İngilizce. DeepL aracılığıyla çevrim içi çeviri yapabilirsin.
💡 Belirli bir modelden mi bahsediyorsun? Bağlantıyı, başlığı veya model numarasını ekle.
🖼️ Fotoğraf göndermek️ ister misin? ImgBB gibi ücretsiz bir host kullan ve bağlantıları mesaja yapıştır.
✍️ Yazma İpuçları: Metnini yapılandırmak ve daha okunabilir hale getirmek için Markdown formatını kullan.
consegue fazer um pacote para vender todos os modelos ??
hello back again would you be able to do a 22.5 degree pie cut jig for a 1.75 inch pipe? you did it for me on the 3 inch and 2.5 inch
Hello can you do the below design for 63.5mm elbow 84mm clr
2.5" / 63.5mm Y Pipe 1.5D CLR
i want it for 63.5mm 84mm clr elbow
Thank you for your reply just bought it, i want to ask also do you have or can you create a 3d for the elbow i send you like the folowing https://3dpolyex.com.au/products/y-pipe-45-degree-cutting-jig-for-1-to-5-and-1d-1-2d-1-5d-clr
hello can you please make me a model for 63.5mm 1.5mm thick elbow pipe at 84mm Radius?
hello, confirming your CLR is 84mm and the OD is 63.5mm or 2.5"
here is the link to what you asked for anyway: https://cults3d.com/en/3d-model/tool/2-5-63-5mm-84mm-clr-mandrel-bend-cut-jig
Thank you for your reply just bought it, i want to ask also do you have or can you create a 3d for the same elbow 63.5mm 84mm clr, like the folowing https://3dpolyex.com.au/products/y-pipe-45-degree-cutting-jig-for-1-to-5-and-1d-1-2d-1-5d-clr
Hello i have bought two of these files,neiter one fit my bends well. so i am pretty sure it is because i an using mandrel bends.
i would like to get you to make the files to fit these. if you could please let me know exactly what measurements you need that would be great..
thanks Bill
Hello, what schedule pipe are you using, what size and what is the CLR of the pipe?
ok so i hope i am measuring this correctly. lets do one to start and if it is right i will send you measurements on the second one.
so i am using stainless steel exhaust tubbing.
it is 63.4 mm
2mm wall thickness
and i i am right the clr is 96.4
i wish i could add in pictures and show you how i measured.
Bill
that is the exact bend i hope that helps
generally the CLR will be 1, 1.2 or 1.5 (63.5, 76.2 or 95.25) I cant see any information on the website you provided to show anything otherwise. is the bend the issue or the pipe diameter?
it is the bend. do you have a email i can send pictures too? the 2.5 inch and the 3 inch are the same situation.thanks
hi, i purchased your 2.5" y pipe jig. i wanted to ask if you can make a 2.5" on a 3.5" CLR?
Good afternoon,
I purchased the file package and have already downloaded it.
Could you tell me if it's compatible with OD pipes and not scheduled pipes?
Thank you very much, Felipe from Brazil.
Good day could you do a 5 inch clr for a 3 inch pipe? Looking to do some work using the vibrant 3inch u-j tubes
Hello, a 5" CLR is rather large i will have to check if it can be sized for a printer
hey
i have a small fab shop and have some tight radius 90s i need to make some tips for some customers. how can i pay you for some files?
Hello what is the CLR you are after?
Would you make a deal on all the files for the pipes
Tienes plantilla para tubos de 35mm?
hello, currently no. do you have a link to your supplier?
Hola, compre el diseño este para corte a angulo en 3" y yo utilizo codos de 90° de 1.5 y el diseño impreso de 3" de 1.5 no me cuadra con el codo, que puede pasar? Gracias.
Hello, Which order are you referring to ?
can you make a 2.25CLR jig for the 1.5in schedule 10 weld els?
the 1.5 works for the tight radius but the long radius is 2.25
thanks!
Hello, Yes I can. Have you got a link to your manufacturer?
here you go. they only sell a long radius and short.
ever get a chance to take a look at that link?
Hello, Yes I did, we have currently slowed down a little due to the holiday period. The design should be up tomorrow
I dont see the 2.25 radius sch10 jig :(
Is there any way I can still get the STL for the Milwaukee M12 soldering iron packout kit?
Hello, We dont sell this item any more
this doesnt fit all in one print how can i print the stopping tab seperately
Hello, You need to spilt the object in your slicing software - in bambu studio its called "split to objects" and its the 4th button from the top right
Hey mate is it possible for you to make a 1.75 inch 2.75 inch clr 90 degree cutting jig model that I can purchase from you thanks.
to confirm you would like a 1.75" diameter with a 2.75" CLR?
That’s it man
instead of a piecut jig can you just make a 4in and 5in straight tube jaw for a bandsaw?
ready to buy whenever
Hello,
I have been asked this a few times. I will start the project soon
i bought the 5 inch pie cut jig and i thought it included the 3 inch and it doesnt im a idiot but i need the 3 inch
i ment to buy the one for 3inch tubing
Ive printed off a few of these and they just dont hold up to me long lol. Was wondering if youd send me the step file so I can get it cnc'd
my bad lol just noticed I didnt say what I had, I ordered the 2.5 & 2.25 Pie Cut Jig awhile back
my email is @prestonsteier1@gmail.com
I recently purchased your 2.25 exhaust mandrel cutting jig and I have started printing the stl files but there is not file for adjusting the stop/degree setting I can use a shim or scrap but I was hoping u could provide the file
hello, I have just updated the files for you. You can now re download them and the pin should be there
Thank you very much
Got a bundle price for the pipe cut jigs?
hey buddy. I still need a 1.5in sch10 jig for 2.25CLR 90deg elbow. thanks
hello, as requested: https://cults3d.com/en/3d-model/tool/1-5-sch10-mandrel-bend-pipe-cut-jig