Pickle rick with rat armor

Pickle Rick with Rat Armor - Rick and Morty

Relive the adventures of Pickle Rick with this detailed figure featuring both Pickle Rick and his rat suit/armor. The design allows you to detach Pickle from the armor, giving you the freedom to display him in any way you prefer.

Printing instructions:

Colors: Print each piece in its original color for an authentic, detailed finish.

Spine: Shape the spine by applying heat and use glue to assemble the pieces and ensure stability.

Body: You can print the body without supports if you divide it into two parts, cutting above the eyes and printing from the head. Alternatively, print with a diagonal cut, allowing you to place a nose support resting on the edge of the mouth.

Filament Details:The eyes and legs require one filament change for a two-color effect, while the mouth needs two filament changes for a more realistic result.

Joints: The arms and legs are jointed, allowing you to choose Pickle Rick's pose. However, they may need additional glue to maintain the desired position, as they are not rigid enough to stand on their own.

Base Included: A base is included to provide added stability to the figure and make assembly easier.

This model is perfect for Rick and Morty fans looking for a unique, customizable collectible - print, assemble and display Pickle Rick in all his glory!

For the Body:

Layer height: 0.3 mm

Layer Fan: Enabled for better print quality.

For Other Parts:

Layer Height: 0.1 mm for finer details.

For "Skin" Parts:

Fuzzy Lining: 0.3 mm thick for a textured finish.

For "Flesh" Parts:

Fuzzy Lining: 0.2 mm thick for a smoother finish.

Hands:

Print: Print alone with active layer fan and no diffuse liner to avoid deformation.

"Forearm" file:

Quantity: Print 2 pcs.

Base:

Horizontal Expansion: -0.1 mm for a perfect fit.

Back:

Negative Horizontal Expansion: For ease of assembly.

Brackets: Enable brackets for lower tips.

Heat Forming:

Recommended Parts to Heat: Mouth, eyebrow, and wire. Use a lighter gently to heat and shape before gluing.

Spine: Requires patience. Heat with a stove or grill until moldable. Wrap it around the body of the pickle, first the lower part (hip), then, in a second phase, the ribs.

Back Assembly:

Can be glued before or after heating the spine. If done after, heat and bend the pieces separately to fit them correctly.