MNW PP-19 BIZON Upper Kit for Firewad AAP01 AK Lower Airsoft

PP-19 Bizon Upper, for Firewad AAP01 AK Lower.

MINIMUM PRINTING BED SPACE REQUIRED: 256mm x 256mm x 256mm

PLEASE NOTE: IN ORDER TO USE CYMA BIZON AEG MAGS, YOU NEED TO CUT AWAY THE FIREWAD AK LOWER'S MAGWELL WALLS (See pictures). Cyma bizon mag referenced for this project, no guarantee on fitment with other brand magazines.

You CAN use the Firewad AK without modifying it if you wanna use AK mags but meh, defeats the purpose of this kit, and holding the handguard may be awkward. Also the M4 and MP5 Lower kits fit too but looks weird.

Please Note: Stock AAP-01 Upper assembly required.

Please Note: Firewad's AAP01 AK Lower required. You can get it here: https://cults3d.com/:3338577

Please Note: NOT compatible with Grip Panel Version of Firewad Lowers, as it gets in the way of the Upper.
Must use Original AAP-01 Lower Grip style for Firewad Lower.

Recommended Inner Barrel Length: 300MM to 430MM.

Outer Barrel tip threaded for -14MM(CCW) Threads.
Bizon Muzzle included in files.

Picatinny rail is in MIL-STD-1913 Standard.

Picatinny Stock included in files, although no folding stock hinge.

See included .txt for assembly.

Hardware Required:
-Rear Bolt Stop Screws - M3 FlatHead/Countersunk screws, 10MM Long, x2pcs.
-Bolt Mount - M4 Stud screws, 8MM Long, x2pcs, OR M3 Stud screws+M3 Hex Nuts, 2pcs of each.
-Charging Handle Plate + Bolt Mount - M2 FlatHead/Countersunk screw, 16MM Long+M2 Hex Nut, x1pc. of each.
-Charging Handle + Inner Charging Handle Plate - M2 FlatHead/Countersunk screw, 16MM Long+M2 Hex Nut, x1pc. of each.
-Body + Outer Barrel - M4 FlatHead/Countersunk screw, 20MM Long+M4 Hex Nut, x1pc. of each.
-Sight Post - M4 FlatHead/Countersunk screw, 16MM Long+M4 Hex Nut, x1pc of each.
-PP Bizon Mag Mount - M3x40MM Long FlatHead Screw+M3 Hex Nut x1 pc. of each
-PP Bizon Mag Mount + Gas Block - M3x10MM Long FlatHead Screw+M3 Hex Nut x1 pc. of each

Optional Hardware:
-Upper Picatinny Rail Stock Adapter - M3x40MM Long FlatHead Screw+M3 Hex Nut x1 pc. of each(To attatch to lower rear pin hole), M3x25MM Long FlatHead Screw+M3 Hex Nut x 1pc. of each(To connect Top Rail to Lower Rail), and M3x10MM Long Screw to screw on the Top Rail as the Bolt Stop.

-Bizon Picatinny Stock - M4x30MM Long FlatHead Screw+M4 Hex Nut x2 pcs. of each

-Bizon Handguard Picatinny Rail - M3x40MM Long FlatHead Screw+M3 Hex Nut x1 pc. of each

Models made in inches, so if you load it in your slicer and it is super tiny, then right click the model and select "Convert from inch" to fix it, or scale it up 2540%

MINIMUM PRINTING BED SPACE REQUIRED: 256mm x 256mm x 256mm

Pictures shown use Sunlu PLA+2.0 filament.

!!!Print Bolt Stop with 2 walls+96% Aligned Rectilinear infill for best rigidity!!!

General Settings used:
0.2MM Layer Height
4 Wall Loops
44% Gyroid Infill
Supports On
Outer Brim On, 5MM Wide

Tinker as you please.