H0 Single Edge Platform Modules - Basic Set - 4colors FDM

Name: H0 scale Single Edge Railway Platform Modules:

(1) MP201 middle module (multiple)

(2) MP202 initial module

(3) MP203 end module

Scale: H0 (1/87)

Platfom size: width: 37mm; height: 13,25 mm; length: any - thanks to the multiplied module MP201

Note1: the platform height can be changed by rescaling the platform base module (see attached photo), similarly, the platform width can be scaled in this way +/- 10%

Note2: The design is not symmetrical! If you want to get the model on the other side of the tracks, use mirroring in the slicer.

Printer (my printer): Anycubic Kobra S1 with one Ace Pro (4 colors)

Colors: (1) gray; (2) black/dark gray; (3) pink/red (4) white/yellow

What you'll receive after downloading the project: 3MF file: project Anycubic Next Slicer (based on Orca Slicer). This file contains a ready-made project for printing on a Kobra S1 printer equipped with one Ace Pro.

I assume that the project can be printed on other color FDM printers, not only the Anycubic Kobra S1, but I only have this printer and I have no way to verify it.

If you want to make sure you can print this design, download as trial the free platform module initial/end with barrier:

https://cults3d.com/en/3d-model/architecture/h0-single-edge-platform-modules-with-barriers-4colors-fdm