Easy Print Any Printer Triumph Mug Parking Space Mug Cup Coaster Set and Storage Holder Case Box Daytona Bonneville T100 T120 Trident 660 Tiger 800 Speed Triple Street Rocket Speed T120

Easy Print Any Printer Triumph Mug Coaster Set and Storage Holder Case Box Daytona Bonneville Trident Tiger Speed Triple Street Rocket Speed T120

The perfect Mug Coaster Set or Mug Parking Space for any Triumph owner complete with storage case/box. They make a great gift too.

This set has been designed for easy printing on any printer.

Don't forget to checkout the Bobblehead Biker https://cults3d.com/:3991519

Printing Instructions

Any Printer - Pause Method - Start the print in your chosen base colour then simply pause the print as the desired height and change the filament or add a pause in the gcode via your slicer.

Multi-colour printers can use the K2 Creality Print Files or the Bambu Studio Files for the X1C and adjust accordingly.

AMS/CFS Setup
1. BLACK
2. WHITE

Non Multi-Colour Printers - Once you have printed the lid outer and lid insert simply add a small amount of glue on the inside edge and push the insert logo into the lid surround until they click together. Mine didn't require glue but it may be needed.

Optional - There is a channel on the back of the coaster so you can glue in a piece of soft filament to protect expensive tables and surfaces from marks.

Basic Print Settings

0.4 Nozzle
0.2 Layer Height
10 - 15% Infill
No Supports Required and No Brim

Printing Instructions

Any Printer - Pause Method - Start the print in your chosen base colour then simply pause the print as the desired height and change the filament or add a pause in the gcode via your slicer.

Multi-colour printers can use the K2 Creality Print sliced profile or the Bambu Studio sliced profile for the X1C and adjust accordingly (Preview change filament method).

Once you have printed the lid outer and lid insert simply add a small amount of glue on the inside edge and push the insert logo into the lid surround until they click together. Mine didn't require glue but it may be needed.

Optional - There is a channel on the back of the coaster so you can glue in a piece of soft filament to protect expensive tables and surfaces from marks.

Basic Print Settings

0.4 Nozzle
0.2 Layer Height
10 - 15% Infill
No Supports Required and No Brim