2070 LED Lamp

The 2070 Lamp represents the next step in the evolution of light as sculpture. A continuous circular form with a glossy, molten-like surface, it radiates a warm inner glow that feels less like illumination and more like a sunrise contained.

Finished in high-gloss orange, the lamp blurs the line between industrial design and conceptual object—its seamless geometry suggesting motion, its soft LED halo evoking a horizon not yet reached.

Unlike earlier editions, the 2070 leans further into refinement: smoother, bolder, almost aerodynamic. A sculptural light piece that feels at once nostalgic and forward-looking—an artifact from the future imagined from the past.

3D print. Recommend printing horizontally, with supports. w or w/o fuzzy skin. Mine was printed with ABS then vapor smoothed, also with fuzzy skin. Min 5% infill with min 3 walls. If your filament is transparent use (lighting) infill at 10% save you a headache of your infill showing when the lamp is on.

materials needed:

LED Strip:
https://www.amazon.com/dp/B0D3PLDYVN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

The LED strip easily lays in the groove.

Sauder Female DC to LED:
https://www.amazon.com/dp/B0CQNSBZHD?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

Dimmer button:
https://www.amazon.com/dp/B0DC51C1GS?ref=ppx_yo2ov_dt_b_fed_asin_title

Caulk: x3-4
https://www.amazon.com/dp/B0C448QB1K?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

caulking to diffuse light:
tape off both sides of the LED strip and use all three CLEAR caulk and use a flat edge to cleanly scrape and flatten the caulk. Work somewhat quickly it will start to harden. Work in sections.

Easily connects DC to DC, and Boom, you have a dimmable lamp that's awesome!