İçeriğe atla
Reklam

5.00 Inch Exhaust Fabrication Kit

Reklam
Paylaş
Şuna ekle
Make
?
Eser kalitesi: 0/5 (0 oy)
Üyelerin basılabilirlik, fayda, ayrıntı düzeyi vb. konularda değerlendirilmesi
Lisans
Kullanımlar
3D tasarım formatı
5 dosya (ZIP) Kapat
  • 5.00 Bends 0mm Tolerance V2.zip
    • 15 Degree/Long Radius/5.00 Inch - 15 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 15 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 15 Degree 190.5 CLR.stl
    • 15 Degree/Long Radius/5.00 Inch - 30 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 30 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 30 Degree 190.5 CLR.stl
    • 15 Degree/Long Radius/5.00 Inch - 45 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 45 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 45 Degree 190.5 CLR.stl
    • 15 Degree/Long Radius/5.00 Inch - 60 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 60 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 60 Degree 190.5 CLR.stl
    • 15 Degree/Long Radius/5.00 Inch - 75 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 75 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 75 Degree 190.5 CLR.stl
    • 15 Degree/Long Radius/5.00 Inch - 90 Degree 190.5 CLR End.stl
    • 15 Degree/Long Radius/5.00 Inch - 90 Degree 190.5 CLR Start.stl
    • 15 Degree/Long Radius/5.00 Inch - 90 Degree 190.5 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 15 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 15 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 15 Degree 127 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 30 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 30 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 30 Degree 127 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 45 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 45 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 45 Degree 127 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 60 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 60 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 60 Degree 127 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 75 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 75 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 75 Degree 127 CLR.stl
    • 15 Degree/Short Radius/5.00 Inch - 90 Degree 127 CLR End.stl
    • 15 Degree/Short Radius/5.00 Inch - 90 Degree 127 CLR Start.stl
    • 15 Degree/Short Radius/5.00 Inch - 90 Degree 127 CLR.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 22.5 Degree 190.5 CLR End.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 22.5 Degree 190.5 CLR Start.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 22.5 Degree 190.5 CLR.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 67.5 Degree 190.5 CLR End.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 67.5 Degree 190.5 CLR Start.stl
    • 22.5 Degree/Long Radius/5.00 Inch - 67.5 Degree 190.5 CLR.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 22.5 Degree 127 CLR End.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 22.5 Degree 127 CLR Start.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 22.5 Degree 127 CLR.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 67.5 Degree 127 CLR End.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 67.5 Degree 127 CLR Start.stl
    • 22.5 Degree/Short Radius/5.00 Inch - 67.5 Degree 127 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 18 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 18 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 18 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 27 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 27 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 27 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 36 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 36 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 36 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 54 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 54 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 54 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 63 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 63 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 63 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 72 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 72 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 72 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 81 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 81 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 81 Degree 190.5 CLR.stl
    • 9 Degree/Long Radius/5.00 Inch - 9 Degree 190.5 CLR End.stl
    • 9 Degree/Long Radius/5.00 Inch - 9 Degree 190.5 CLR Start.stl
    • 9 Degree/Long Radius/5.00 Inch - 9 Degree 190.5 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 18 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 18 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 18 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 27 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 27 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 27 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 36 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 36 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 36 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 54 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 54 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 54 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 63 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 63 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 63 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 72 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 72 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 72 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 81 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 81 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 81 Degree 127 CLR.stl
    • 9 Degree/Short Radius/5.00 Inch - 9 Degree 127 CLR End.stl
    • 9 Degree/Short Radius/5.00 Inch - 9 Degree 127 CLR Start.stl
    • 9 Degree/Short Radius/5.00 Inch - 9 Degree 127 CLR.stl
  • 5.00 Inch Centerline Markers.zip
    • 5.00 Inch - Center Line Marker - Pen Adjustable 14mm.stl
    • 5.00 Inch - Center Line Marker 3 Port - Pen Adjustable 14mm.stl
  • 5.00 Inch Expander.zip
    • 5.00 Inch Back Plate.stl
    • 5.00 Inch Clamp.stl
    • 5.00 Inch Expander.stl
  • 5.00 Inch Straight.zip
    • 5.00 Inch - 100mm Straight.stl
    • 5.00 Inch - 105mm Straight.stl
    • 5.00 Inch - 110mm Straight.stl
    • 5.00 Inch - 20mm Straight Start.stl
    • 5.00 Inch - 20mm Straight.stl
    • 5.00 Inch - 25mm Straight.stl
    • 5.00 Inch - 30mm Straight Start.stl
    • 5.00 Inch - 30mm Straight.stl
    • 5.00 Inch - 35mm Straight.stl
    • 5.00 Inch - 40mm Straight Start.stl
    • 5.00 Inch - 40mm Straight.stl
    • 5.00 Inch - 45mm Straight.stl
    • 5.00 Inch - 50mm Straight Start.stl
    • 5.00 Inch - 50mm Straight.stl
    • 5.00 Inch - 55mm Straight.stl
    • 5.00 Inch - 60mm Straight.stl
    • 5.00 Inch - 65mm Straight.stl
    • 5.00 Inch - 70mm Straight.stl
    • 5.00 Inch - 75mm Straight.stl
    • 5.00 Inch - 80mm Straight.stl
    • 5.00 Inch - 85mm Straight.stl
    • 5.00 Inch - 90mm Straight.stl
    • 5.00 Inch - 95mm Straight.stl
  • 5.00 Inch Tear Drop Exit.stl.zip
    • 5.00 Inch 127mm CLR Tear Drop Exit.stl

Formatlar hakkında daha fazla bilgi edin
Yayın tarihi
Tasarım numarası 3839407
Tasarım yazarı RkDesigns
RkDesigns

RkDesigns

Bu tasarımla ilgili bir sorun mu var? Bir sorun bildir.

3D yazıcı dosyası bilgisi

3D model açıklaması

KIT UPDATE!!!!
V2 bends now added to this kit, V1 and V2 are interchangeable with each other, regarding fitment V2 has 0mm tolerance between the male and female clip to give a tighter fit, meaning much better holding strength from one piece to another.

I have increased the size of the fillet underneath the male clip to reduce the amount of supports needed when printing.

I have also made the four main rotation angle markers longer, down the spine, then 90 degrees apart. This is to make it easier when looking at the rotation between sections.

All kits will also have 22.5 degree increment bends added to the kits.

DESCRIPTION
This fabrication kit includes everything you need to mock up a 5.00" tubing run. Every bend has a start piece and currently a selection of straight pieces(if you need another size drop a message), with the clips then ready to start your fabrication, then there are a range of angles in 9 and 15-degree increments, with two different center line radius. Each is also marked in increments of 15 degrees so you can accurately note the angles at which two pipes sit when translating your design, to further this, it also includes some extra tools for when converting this into metal, the mandrel bend cut markers allow you to turn larger bends like 90 degree into smaller angles, and the center line markers allow to accurately mark either 2 or 3 lines along the length of a 5.00” tube at either 180 degrees or 90 apart respectively.

The kit contains an expander that will fit into an existing pipe or V-band from 123-127.7mm, a start piece then attaches to this to allow you to carry on from existing pipe work, or start a new downpipe from scratch. The expander works by using the bolt that the start piece or end piece attaches with to compress and expand inside the tube, it also pulls the start piece or end piece in to make sure that it doesn’t move while mocking up. Larger systems will need added supports. It utilises an o-ring which is used to crip the pipe and also retract the clamps from the inside of the pipe.

Parts Included in this listing:

5.00" expander
123-127.7mm expander joint for start piece

5.00 Inch, 5.00"(127mm) CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
22.5 degree
27 degree
30 degree
36 degree
45 degree
54 degree
60 degree
63 degree
67.5 degree
72 degree
75 degree
81 degree
90 degree

5.00 Inch, 7.50"(190.5mm) CLR bends (Start + end piece for all)
9 degree
15 degree
18 degree
22.5 degree
27 degree
30 degree
36 degree
45 degree
54 degree
60 degree
63 degree
67.5 degree
72 degree
75 degree
81 degree
90 degree

5.00 Inch straight
20mm (Plus Start Piece)
25mm
30mm (Plus Start Piece)
35mm
40mm (Plus Start Piece)
45mm
50mm (Plus Start Piece)
55mm
60mm
65mm
70mm
75mm
80mm
85mm
90mm
95mm
100mm
105mm
110mm

Centerline markers (See my other listing for information on these)
5.00 Inch
https://cults3d.com/en/3d-model/tool/centerline-tools-1-to-3

Tubing bend cut guide(See my other listing for information on these: https://cults3d.com/:2168038)
127/5.00" CLR 5 Degree
127/5.00" CLR 9 Degree
190.5/7.50 CLR 5 Degree
190.5/7.50" CLR 9 Degree

Expander BOM:
M8 Allen bolt(Length dependent on clearance 30mm is plenty long enough)
M8 Washer
M8 Nut
O-ring(go no larger than ID 120mm x 2mm)
Or small rubber bands also work well

If you want a different pipe size, specific angle or an exhaust flange or turbo Flanges adding to the collectors, drop me a message and I will get back to you as soon as possible.

3D baskı ayarları

See guide availble for free:

https://cults3d.com/:2567742

This includes a small description on all files available, it also had a section on printing all of the pieces avalble.

Kategoriler

Tüm kategoriler › Alet › El Aletleri / KENDIN YAP / Makine Aletleri

Meta etiketler

Etiketler

Reklam

Cults'ı desteklemek ister misin?

Cults'ı seviyorsun ve maceraya bağımsız olarak devam etmemize yardımcı olmak mı istiyorsun? 4 kişilik küçük bir ekip olduğumuzdan faaliyetimizi sürdürmemiz ve gelecekteki gelişmeleri yaratmamız için bizi desteklemen çok kolay. Herkesin erişebileceği 3 çözüm şunlardır:

  • REKLAM:" Reklam engelleyicini devre dışı bırak."
  • BAĞIŞ:" Ko-Fi Bağış yap aracılığıyla bağış yap"
  • KULAKTAN KULAĞA:" Platformu ve topluluk tarafından paylaşılan muhteşem 3D dosyaları keşfetmeleri için arkadaşlarını davet et!"

Cults3D üzerinden paylaşım ve indirme, tasarımların maker topluluğunun elinde kalmasını garanti eder! Böylece tasarımlar rakip platformların sahibi olan ve bunları kendi ticari çıkarları için kullanan 3D baskı veya yazılım devlerinin eline geçmez.

Cults3D, herhangi bir yatırımcıya veya markaya karşı sorumlu olmayan ve kendi kendini finanse eden bağımsız bir sitedir. Sitenin gelirlerinin neredeyse tamamı **platformdaki maker'lara geri ödenir. Sitede yayınlanan içerikler, 3D modelleme pazarını kontrol etmek isteyen 3D yazıcı markalarına değil, yalnızca yazarlarının çıkarlarına hizmet eder.