163 comentários

Moin Rah3, ich bin fast fertig mit dem Druck der Stuka und die meissten Schritte des Zusammenbau ergeben sich.
Allerdings an welcher Stelle der Tragflächen die lösbare/zu verschraubende Stelle sein soll, und wie diese umgesetzt wird weiss ich nicht.
Kannst du mir da bitte zeigen wie das gelöst wird.
Vielen Dank im voraus

Antwort gerne auch an moeller-holger@online.de

Hi Rah3, I'm almost done printing the Stuka and most of the assembly steps are straightforward.
However, I don't know where the detachable/screw-on section of the wings should be and how to implement it.
Can you please show me how to do this?
Many thanks in advance.

moeller-holger@online.de

Moin Rah3, ich bin fast fertig mit dem Druck der Stuka und die meissten Schritte des Zusammenbau ergeben sich.
Allerdings an welcher Stelle der Tragflächen die lösbare/zu verschraubende Stelle sein soll, und wie diese umgesetzt wird weiss ich nicht.
Kannst du mir da bitte zeigen wie das gelöst wird.
Vielen Dank im voraus

Hi Rah3, I'm almost done printing the Stuka and most of the assembly steps are straightforward.
However, I don't know where the detachable/screw-on section of the wings should be and how to implement it.
Can you please show me how to do this?
Many thanks in advance.

hello

I don't understand how the Wing connector buckle coupler works

Any diagrams or other photos?

thank

hi i remember you posted mq28 ghostbat i m here for download it but i didn't see it anymore,what happened?and about jaguar sepecat my printer is 225x225 can handle it?thank you for your fantastic projects

Just printed the Sepecat Jaguar and am loving the detail. Have you done a Harrier with the same level of detail?
(PS I was the Development Project Officer of the Jaguar in the 80s)

Hello, thank you for your design; it's a fantastic airplane with the carbon fiber tubes, landing gear, and flap covers. I'm printing it at 130% with two 90mm 12s EDFs. My collection is still missing an F-14 Tomcat. Unfortunately, I haven't found a well-designed one with landing gear yet. Perhaps that would be a project for you. I would be really happy if I could print an F-14 as well-designed as the Su-57. Best regards from Germany and Merry Christmas!

I bought the MQ-28 from you. Can you please let me download the files. I understand people haven’t been successful with it, but I still want to try to make it work.

Thanks! Doug

Hi Rah3
Leo here. So sorry that your email did not get through. My email account does not block anything...maybe a file size issue?
Could you please resend perhaps just the message w/o attachments?
mail@leocheung.net

other contact means:
RcGroups ID: Levendis
whatsapp: 852- 9 5 5 0 9 8 8 8 (spaces removed)

Apologies for the trouble

Can i get black friday discount? I make an offer for Satuka models

Su 57 70edf Flap02R https://disk.yandex.ru/d/hJXPZAdL27Kw7w я его 3 суток моделировал

Hi Rah66,

My friend Andrew and I recently purchased a set of stls from Cults3d of your beautiful 100p project. We are impressed by how accurately you have conveyed the beautiful and organic lines of the 100p.

Although Andrew and I have been RC aircraft enthusiasts for twenty years and operate a small 3D printed model train business (www.studiochilap.com), this is our first 3dp aircraft project.

We have a horrible track record of hand launching aircraft (about 1 in 10), but we have a wonderful RC airfield here in Hong Kong with about an 800 feet long runway.
https://maps.app.goo.gl/854nWVBvzAQ5kaCD9?g_st=ic

We want to try to get your permission to do some additions to the design:

1) adding landing gear along with supporting structure
2) mods to allow for vacuum formed cockpit glass
3) explore further weight reduction with ASA-Aero and new infill methods
4) add jigs and mating surfaces to improve the parts that need to be glued together
5) possibly scale the plane up to 2m wingspan so we can add cockpit, retracts, steerable talewheels, etc.

We have scrounged together USD100 which we could paypal to you as a symbolic gesture of appreciation for your work so far. Would it be ok for you to share with us your .step files? The proposal is for you to grant us a license to use the designs for strictly non-commercial purposes. No external distribution, fully crediting you as the original creator, and we would also share with you all the mods we do in the future for the 100p. If the enlarged plane maidens successfully, we would ask for usd50 back?

Please let us know what you think.

Best regards
Leo Cheung
mail@leocheung.net

helo, I am thinking of buying your mig 21 lancer as well as several other models and would like to know where to get instruction manuals please

Hi, can I ask you to share the print file for the Su-57, namely (FLAP02), the thing is that I am already gluing the wings, but I did not find the flaps in the files, that would be great, thank you

I was looking to use a working design for a drone version. Id flatten and widen the fuselage. Maybe heavily modify to VTOL. Can I get there from here. love love airframe. what kind of run time do you get.

I am building your SZD-55 and I would like it as a pure glider. Would you please design a nose cone that I can use instead of the motor mount.

Hi! Is it possible to get the fuse 03 part on the Mirage without the surface text on it? Thanks so much!

Hello, I downloaded and paid for the Dark Star file, but it's not the latest version. How can I download the latest free version? Thank you in advance. Kind regards.
Hallo, habe die Dark Star Datei heruntergeladen und bezahlt. Allerdings nicht die Aktuelle, wie kann Ich, die neuste kostenfreie Version herunterladen? Vielen Dank im Voraus mit freundliche Grüssen

Hi, I was looking for your SEPECAT JAGUAR GR.1 model and see that it is no longer available. I was hoping that I can get the model from you as I am trying to print a model for a pilot that used to fly those planes. It is intended as a birthday gift for him. He is now retired and has fond memories flying the Jaguars. Can you please help with your model for printing. Thank you.

Regards,
Varinder

Hallo haben sie eine genaue Anleitung für den Bau der stuka?

Hello,
I am currently printing the Ultimate Swift. The model looks great, and I would like to build a larger model out of wood. Is it possible to obtain a STEP file for this purpose?
Thanks and best regards

Hello. Can you please send me the instructions for "R/C DIANA-3 SCALE SAILPLANE WINGSPAN 4M" before buying? So I can see what is needed.
Thank you. mapich@seznam,cz

Hello, I am having a problem slicing the wing of the 50mm EDF Acrobatic model. In Prusa Slicer, only part of the wing is displayed. Setting: Spiral vase mode. I need help.

Dear sir, is it possible to multiply by 150% the mirage 2000 to fit a 120mm fan ?
Thank you

in page 13 of the dark star manual, it says to cut a hole to fit a 6mm carbon pipe, but 6mm is far too big for the part on fuse02, also, since a carbon pipe is supposed to be fitted in the hole then why was it covered???

Sorry about my previous message. The question of printer size applies to printing the parts of your Pucara. Would an Ender 3 Pro be sufficient?