18 comentários

hi, Cults isn't notifying me by email of messages so did not see this until today. sure no problem! if not distributing or selling the modified files you can mod to your hearts content. I do intend to make props scale files at some point but lately life has prevented me from having the time to do so so if you do wish to wait for me to do some just be aware it may be a little while

hi, sorry I missed your message, for some reason I don't get email notifications to let me know anyone commented. I do still hope to do smaller scale versions at some point when I have time to get back to working on 3D models. as for the existing files, scaling should be easy but thickness of some parts might become an issue at smaller scale. If you wanted to try before I get round to it I can certainly do a discount for your trouble. J

That would be great! What is a fair discount for such a thing? Depending on that, I may pick up several of your files I've been hoping to convert to 1/12 scale. I'll pass the mods back to you to disseminate them if I can get them to acceptable quality. :) Thank you so much, and do let me know what you decide on and the logistics therin!

(sorry, Cults still isn't notifying me of messages so didn't see your reply till today)
I can give you a 50% off for the trouble of re-scaling

No worries, Cults has done the same to me. XD That would be fantastic! Do you want me to make 50% offers on the files I want to work on, or is there another way you'd prefer to go about it? Thank you again!

sure, just send offers I will accept. J

hi, I don't really use social media outside of sometimes posting on Reddit but I do have a thread on Collectorfreaks forums where I sometimes post work in progress updates: https://www.collectorfreaks.com/threads/snow-clone-trooper-kits-now-uploaded-constant-updates-jaztermareals-custom-star-wars-more-1-6-3d-printable-files-library-archive.250685/

You can follow my Cgrader/Cults/Printables/Thingiverse pages where I upload my models

Hi, since all printer models print slightly different and each resin has its own settings there isn't really a one size fits all for settings so I did not include it, and since I do not own any FDM printers I do not know what settings would be best for that style of printer either. Same goes for pre-supported files since many folk seem to disagree on ideal amount and type of supports (I tend to go heavy on supports myself just out of fear of print failures, most would say I over-support my files when I print) so I leave it up to the individual to choose the support types and amounts that suit their needs and get the best results. This particular file would need supports (it won't print in place) but your slicer may be able to add auto supports if it is something you have never done before.

Sorry I couldn't give a more helpful answer than that. Thanks for your interest in my file! hope it prints well for you.

hi, I do not have Insta actually but you can message me here/printables/cgtrader

The website doesn't show me which armour model you are referring to but if it is one of my 1:6 imperial armours I have not yet made 1:12 versions yet as have spent much of the past few months away from home, but I will try to do 1:12 versions at some point. The current versions can be scaled down but not sure if they would be thick enough as is. If when I return to my country I can get a chance to test I will. J

Thanks for answering so quickly - as for the armour - General Veers - I clicked on contact you from that page (thought it would indicate the model I was referring to). Great to hear you will be doing a 1:12 scale in time, fantastic. As an additional question be great with this set if you could add in an Imperial Officers cap - doesn't seem to be a model that I have found available elsewhere - certainly would more than complete your amazing Veers set :)

I could certainly look into doing a cap too. Normally for 1:6 fabric would be best but at 1:12 fabric would look too bulky so a sculpted printable cap seems like a good suggestion. Still gonna be stuck in Asia a while so not sure if I will be able to get any 1:12 models done before years end but keep eye on my profile as will eventually get new stuff done, probably in new year. J

I have that in my long list of things to make, I likely will, eventually

I will go make the file when I get back to my pc in the morning, I will also double check the parts you mentioned as they fit perfect before upload so will see what happened there and update

actually, realised I have the files on my other device, I will add them to the listing in a few minutes

uploaded assembled version for use with cap. also just checked the parts and they seem to line up fine my side. can you check again?

Thanks for the fast turnaround. I'll check the other helmet parts again

Checked on the helmet part files and they look ok now, so I must have done something when I opened them that resized one

Good to know they are working fine now :)

hi, I didn't yet do a cut version as given the size it would really depend on the user how many parts it would need to be cut into, however cutting stl's to smaller pieces per your exact needs is fairly easy in programs like meshmixer. here is a video tutorial I used in the past: https://www.youtube.com/watch?v=v69m-ZUGIb8

once you cut model, save each part as a separate stl. when printed you can glue the parts

mostly fusion360

Thank you very much!

hi, which model are you referring to? the messages here do not show which one

Hi, glad you like the files :)

I can't remember the specific helmet file I used for the example image but was probably either one of Skylu3d's files or possibly one from thingiverse. I will need to go search to confirm (am away from home so don't have my PC to hand and am relying on a vpn to get around georestrictions currently so might take me a while to find links, bare with me a few mins :)

Here are the likely candidates for the helmet I used in the image: https://www.patreon.com/posts/phase-1-helmets-58756680

https://www.thingiverse.com/thing:3486066

https://www.cgtrader.com/3d-print-models/hobby-diy/other/phase-1-ct-realistic-helmet-3d-files

Also, I made the ARC wrist gauntlet cover/computer but don't think I ever uploaded it, I can't seem to add it to the message so may try uploading it later.

no not yet, but there multiple options places like Thingiverse (if you look at some of my Phase 3 clone armour listings here may be links to one or two examples) and some creators like Budget3DWorks on Patreon release some free files such as their republic commando armour.

yes that would be fine :) can also link my printables page as that site works more smoothly for me so I may post there more often including updates to files such as fixes. in fact, be sure to check the files there as I may not have loaded fixes to Cults (this site is often super slow for me)

https://www.printables.com/social/303348-jaztermareal/models

Cool, what is the url for that page? Cults is slow af for me too

I sent the URL yesterday but it was pending approval so if you do not see it it is usually listed in descriptions of my recent models. J

which model were you trying to download? (the message notification doesn't indicate which model) all models uploaded to this site should have a download option, if it is missing let me know I can take a look