2565 comentários

Hi, everything good? See you on Monday, I'll have new versions.

I'll check here and upload the new version by tomorrow afternoon.

Depending on the model, I have which one it would be.

Hello, good morning, how are you? Could you explain to me what the dimensions are, the millimeters (MBs) of the model? If it's the dimensions, can I quickly scale it for you to print?

You scaled them prior to me downloading. You scaled them to 1/64th scale. I do have actual measurements that I have converted from real trucks, if that’s easier.

For cabs with double axles with sleeper 139.7mm (5.5in) L x 63.5mm (2.5 in) W x 90mm (3.55 in) H

Triple axle cabs with sleeper 165.1mm (6.5 in) L x 63.5mm (2.5 in) W x 88.9mm (3.25 in) H

Cab size with no sleeper 50.3mm (2 in) L x 38.1mm (1.5 in) W x 31.75mm (1.25 in) H

Day cabs single axle 131.5mm (5.18 in) L x 63.5mm (2.5 in) W x 88.9mm (3.25 in) H
These would be measurements for 1/64th scale conversions.
I hope this helps.

LaVince

Hello, I've been using internet width measurements that I find from some models, and since most of them give me 2500, I'm following the 46mm standard, which is the same as scale models I have to give from gcd, ixo and welly, but any help is valid. I was supposed to modify models, I remember messages for you but I don't remember what you needed, if you could help me.

Hi friend, everything good? In the same ad there's a closed version and another with the windows open.

ok este alem daqueles que pediu no outro site

Si muchas gracias, feliz año nuevo.

update

Hi, the walls might end up a bit thin, but I have Mustang-E and Mustang Eleanor body templates for free, which can be used for testing since they use the same values ​​as the walls. However, I believe they will be thin; you'll be printing them in resin??

OK Thank you

Hi, the walls might end up a bit thin, but I have Mustang-E and Mustang Eleanor body templates for free, which can be used for testing since they use the same values ​​as the walls. However, I believe they will be thin; you'll be printing them in resin??

Happy New Year and all the best to you and your family.

I'll have to check because I have some container carriers, but I don't remember off the top of my head which one and which trailer it's for.

I'll have to see why this model is so outdated; I'd have to check if I still have it.

Great thank you

Are you referring to a separate window or one integrated into the car?

https://cults3d.com/en/design-collections/gauderio/chassis
Hi, I have these chassis that you can customize with cabins and assemble as you wish, so you don't need to buy them myself. It's a way for those who want a more affordable price to assemble a kit.

Hola, Pegasus, no entendí los cambios necesarios en la versión internacional. Haré las modificaciones por ti, pero solo podré hacerlo la primera semana de enero, ¿de acuerdo? Para los próximos modelos, para ayudar a clientes como tú que prefieren versiones cerradas, empezaré a destacar versiones como esa el próximo año, con dos opciones, cerrada y abierta, en los modelos que lancemos el próximo año. Gracias de antemano por comprar mis modelos. Un fuerte abrazo, Feliz Navidad y un próspero Año Nuevo.

The order number is #1454111193

Hi, everything good? So, I'm finishing up a few things here, and I'll start by uploading. You'll receive emails, and at the end I'll also send a message here. Thank you for your purchases.

update mack

update international cab over

Thanks for the update.

Does those 2 updates complete the conversions?

Hi, I had an unforeseen problem here, but by 5 PM tomorrow I will have completed the 1/64 scale conversions of the models.

There are still 5 models missing.

Oh ok thanks again for the update. Merci.

Hello friend, I uploaded all the 1/64 scale models, I hope you like them. If you have any questions, we are available to help with any modifications. We will just not be available next week as we will have a short break, but after January 2nd we will be here to help. If you need anything, have an excellent weekend, Merry Christmas and a prosperous New Year to you and your family.

Sincerely,
gauderio

Hi, there will be new versions by Saturday, I just started making them.

update

Hello, please, Pegaso, you need thinner walls, and that's the International model. I'll have to find the original model, and that will take a few days.

Hi, everything good? Regarding those details when thickening, this happens because the blender increases the walls, resulting in this effect. I'll see if I can find a blueprint and make one for you.

1/32,1/25 and 1/64

thank you, is there a different file for the 1/25

Yes, I just uploaded the files; they are named 1-125 and 1-125-v2.

fantastic, I honestly am sorry for all the bother! you have great designs and and making a special gift for a close friend that has a couple of mins, these are perfect. again, sorry for all the questions

Sure, no need to apologize, I'm here to help, and your questions and feedback provide parameters for improving future models. Thank you for your interest in the models and have a great day.

just one more thing, can you make the wall thickness thicker, like maybe 2.5 mm?

None of the new versions ended up with a thickness close to what the program I use doesn't work with mm, but I made it with values ​​I use to thicken for scale, 1/87. I can even make other versions, but I believe they will be too thick. If you could test and give me feedback on whether the 1-125-v2 versions are good or need to be thicker, I would appreciate it.

got one printing now, the 1-25-v2. I'll let you know Sir

thank you

just want to give you a progress report on that new file. the 1/25-v2. ,,,,,,,,FANTASTIC!!! it's a little thicker and that makes it easier to sand and prep for painting. if you can add that option on your other files, I am sure you get positive reports! Thank you Sir

Thank you for your feedback and for being happy with the model. We will take your feedback into account for our future models. Thank you very much for choosing our models. Best regards, Merry Christmas and a Happy New Year!

Hi, initially yes, of course it will be thinner than 1/32, but I can make modifications.

Hi, everything alright? Is it for 1/87 scale? I'll upload it by Friday and sorry for the inconvenience.