172 comentários

Awesome work! I wish you all the best on this project. It's looking really good! Unfortunately I'm unable for any collab work.

Hi! Thank you! Great point on the tassles: It's a detail I forgot to add. I'll try and see if I can update the model in the next few days. Thanks for pointing that out!

Oh no problem; you are very welcome! I also just noticed that T-Bone appears to have 5 digits on each hand instead of the show-accurate four like Razor has. Also not a big deal, but thought I would point it out! 😺😸

Thank you for letting me know about the link! The info in that text file is definitely incorrect. I've updated the link within the .zip file. Please download it again - my apologies for the error. Thank you again!

Thank you for your purchase!
Primal and Samurai Jack are great suggestions, I'll definitely consider them.

Cybertron: I believe someone released a perfectly accurate cartoon version. I'm not sure where it was released, but it popped up on a Facebook group recently.

I actually plan on releasing a 10 piece model pack for Voltron this year with all pilots, and main villains. Tiny versions are definitely something I'll consider!

Hey. Thanks for the response. Nothing for Cyberton has been readily available or made specifically for model printing. I've been checking for years and I know there are a few of us who need one at the quality for a Masterpiece collection. The bit that you have modeled under your Unicron figure looks great. A cartoon model along those lines that is split and printable would be a must buy. Looking forward to the Voltron pilots. Thanks!

Hello! Unfortunately, I’m not able to provide supports for the models, as support settings can vary quite a bit depending on the printer and slicer being used.

I do mention this on all of my models as well: “The parts for this model are provided as-is and do not contain supports.”

Thank you for understanding!

¡Hola! Lamentablemente, no puedo proporcionar los soportes para los modelos, ya que la configuración de los mismos puede variar considerablemente según la impresora y el programa de laminado (slicer) que se utilicen.

También lo indico en todos mis modelos: «Las piezas de este modelo se entregan tal cual y no incluyen soportes».

¡Gracias por tu comprensión!

In 1/72 scale, the fighter mode it's about 20cm in length. Robot mode is around 21cm tall. In 1/285 scale, both are around 6cm.

Thanks, I've already bought the model

No, it does not, unfortunately. I don't offer pre-supported models. I leave that to the printer and their preferences.

It's the full character as a posable statue with loose joints that need to be glued in place.
This statue stands roughly 30 cm tall.

Sure! You'll be able to sell prints of any and all models I have. By subscribing you'll get access to all new releases when they're done, 6 month backlog of older models, plus I'll consider requests.

One thing to note though: I can't prepare the files for action figures, but you're free to make any edits to the models, and sell 3D prints of them.

Hi! There isn't a standalone version, unfortunately. The ship or robot mode both come with the ARMD-01 (identical models), which can be displayed in their own. They are a single piece model.

Thanks !

Hi! The small vesions with fewer parts can be found here (TV version):
https://cults3d.com/en/3d-model/art/stf-1-starcross-tv-version-2-pack-miniature-scale

And here (movie version):
https://cults3d.com/en/3d-model/art/vdn-1-fortress-1-7500-scale-minis-robot-and-carrier-modes

those say 1/7500 scale i was told you had a 1/275 scale. is that on patreon only?

Nope, there are only the 1/7500 scale (minis for table top), and the 1/3000 scale (great for large scale models) models.
All are on Cults3D.

A 1/275 scale SDF-1 in robot mode would be 327cm in height, which is approximately 10.73 feet (I'd use the 1/3000 scale versions for something that epic).

hmm okay, thanks want to make the macross in the lake as a center piece for a gundam assemble board

Sweet idea!! My rule of thumb would be:
-1/7500 scale minis (great for anything smaller than 30 cm, with fewer parts)
-1/3000 scale (great for very large prints, with lots of parts)
I hope that helps!

¡Hola! Vaya, eso es definitivamente incorrecto. ¿Qué diseño muestra ese precio?

el sdf1 es que dice 262, cuando trae una coma son miles deberia tener un punto decimal. 262.

Agreed! I'll try to build it this summer or fall.

¡Hola! Yo siempre utilizaría soportes tipo árbol, y una boquilla estándar de 0.4 debería funcionar bien. El resto de los ajustes son los predeterminados de la impresora; no es necesario realizar ningún cambio. Si alguna pieza falla, te sugeriría probar a añadir soportes manualmente alrededor de aquellas zonas que apenas tocan la placa de impresión. OrcaSlicer cuenta con una opción para «pintar» esos soportes directamente sobre el modelo. A mí me solía ocurrir que las impresiones se deslizaban y se desprendían durante el proceso, y aplicar un poco de pegamento en barra sobre la placa de impresión me ayudó muchísimo. Espero que esto te sirva de ayuda.

Ok, seguiré tus consejos. Muy amable y muchas gracias por tu atención. Y enhorabuena por tu trabajo. Un saludo

Please post your email address, and I'll send a download link.

Absolutely! In fact, I'm about 2 weeks away from releasing the 4 legged add-on parts. They will be added to the model's files for free.

Yup! Done, the price has been changed.

Thanks bro. Paid already. BTW, your modeling skill is truly awesome, possible to make a VA-3 invader model?

Thank you! It's unlikely, unless there's a huge demand for it. Someone is developing a fully transformable VA-3, and it looks almost done. I don't plan on competing against that.

Hello! Please try downloading the file again. I've included a .txt file with a link to the files on a drive. I hope that helps!

¡Hola! Por favor, intenta descargar el archivo de nuevo. También he incluido un archivo .txt con un enlace a los archivos en Drive. ¡Espero que te sirva!