A creative designer and maker.Check out my etsy shop
https://www.etsy.com/shop/UnrealisticWorks
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇩🇪 País do usuário: Alemanha
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Hello! I bought your design "Minecraft Rabbit". Do you have also the file for the green coaster like in the picture? would be cool.
Thanx and Regards. Claudius from Austria
Sorry I was away on vacation.
Could give me your email address? I can send the coaster file to you.
thank you! ozed@ozed.at
Hello! Love the arm file, however I am having issues with the pieces being too big to fit into each other. I am having to resize manually each piece after printing a sample to see the fit. Any advice you can give me to help speed up the process while saving spool? I was going to use tinkercard to adjust each part to have a specific size so they fit together better, but i think it could also be my printer. I will try a calibration cube soon anyways. Thank you for your help!
Sorry I was away on vacation.
Could let me know which parts are not fitting together? I could try them out and update the model for you.
Hello, this headphone stand hand. What infill are ment to be used and how many of each part does need to be printed to have a full hand?
Best Regards Tomas.
Hello Tomas,
For the arm, set a 60% rectilinear infill for the first 25mm. And the rest 8% gyroid infill. This is to keep the center of gravity low and save time printing. For the rest parts, I used 8% gyroid infill.
You will need finger_connector x14, finger_joint x 14. finger_connector is better to be printed with TPU so the joints are more rigid.
Hope this helps.
Cheers,
Yishi
Hi mate, yesterday i downoload your stl files of super mario coaster, (that' s amazing, i love it!). This message is just to inform you about an issue of the mouth of boo.
When i open the file in the bambustudio, the program tel me that' s too small to open it.
It' just fot information.
for the others no problem, it's all perfect!
Bye
Gabriele
Hi Gabriele,
Thanks for letting me know. I correct the scale of the mouth and it should fine now.
Happy holidays!
Yishi
Regarding "BUZZ LIGHTYEAR HAND HEADPHONE STAND". Do you remember what infill was roughly used on the print? Great job by the way. Going to be an xmas gift for the kid :)
hi, for the main arm, set a 60% rectilinear infill for the first 25mm. And the rest 4% gyroid infill. This is to keep the center of gravity low and save time printing.
For the rest parts, I got by with a 4% gyroid infill.
Thanks!
The Ball A and B opened up in my 3D Software as 3.2mm x 3.2mm x 3.1mm. This can't be right? Please let me know how big they should be so I can change the size.
Sorry, they should be both 10 times bigger.
BallA: 28.88mm x 28.65mm x 29.14mm,
BallB: 32.16mm x 32.02mm x 32.54mm
I will update the models also. Sorry for the inconvenience.
Hello,
I´d like to use your Ring Box commercially. Is there a way to do that? If yes, how would we proceed?
Thanks in advance!