139 comentários

Any in particular?

Yes one in particular, it was only on the 93 - 98 ZJ grand Cherokee limited but I don’t know what it’s called sorry.
Many thanks cheers.

I had a look on Google and there seems to be 20 different OEM wheels. Lol

Are you able to find a photo and drop the website URL in this chat?

Hiya, this is the wheel i was thinking of if this link works!! https://bringatrailer.com/listing/1997-jeep-grand-cherokee-5/

Here you go. (This is as deep as i could make the rears without completely re-designing the rim again. I hope it works for you) https://cults3d.com/:3768347

You’re da man! 🫡

Hi, our files are for personal use, however we do offer a commercial license if interested in selling prints.

The license and details can be found using the link below.

https://cults3d.com/:2291025

Thx for your reply, I have read and understand the agreement and will consult with my partner, is that a 1 time fee? Thx🍻

Yes, it’s a 1 time fee. :-)

Ok Thx🍻

Hi Nenadbc, that is really strange… let me have a look at the file and I’ll get back to you asap.

In the meantime, are you able to email through some photos to show exactly the issue?

Our email is mailto:scalemodelwheels@outlook.com

Thanks mate. We’ll get this sorted for you.

Hi, we checked the file in our slicer and it was fault free. We followed up with a quick print that worked well. I then downloaded onshape CAD design, and I see it has an issue with the rim being made of individual parts (being the rim face, sleeve and hub). I have updated the listing with 2 extra print ready files that should overcome the issue you were seeing in that program. I would however anticipate most if not all of our files that have individual parts will flag in onshape moving forward. Please keep that in mind prior to purchasing other designs. Cheers mate.

The link unfortunately wont load but i'll see if i can find the design online.

Our Standard rim files are available for the budget conscious. It typically includes one print ready rim with our standard hub attached.

Next-Gen is the same rim design only it’s also saved as individual parts, giving you the ability to customise the rim with different offsets, outer rim profiles and of course hub options for different scales.

Each advert has a list of inclusions noted to assist with this.

Thanks for the clarification and the quick design of the galaxy wheels!!!

You’re welcome mate

I have just refunded you the purchase of the standard design rim. I assume you purchased both standard and Next-Gen designs by mistake. Cheers mate

No I meant to purchase both as a thank you for making the file so quickly, I greatly appreciate it and am not worried about $3

That’s really nice of you!

I will definitely have you make other files in the future

if you can send a link to some photos of the rims, we'd be happy to have a look at that for you. :-)

I like this idea. I’ll pop it on the list of wheels to make

SWEET - THNX !!!!!!

Hey mate, the Mustang Wheel / Hubcap has just been completed. :-)

https://cults3d.com/:3778250

SWEET NECTAR brother - Thank You again !!!!

Hey mate, it is currently being reviewed by cults and will take up to 3 days. It might have to be renamed or moved to the naughties section. I’ll send it out if/when available. :-)

rename them or do you have a web site that i can just buy them need them like yesterday

Send us an email and we’ll organise it for you. scalemodelwheels@outlook.com

Interesting….

Will look into this one for you

Hey Bedawg, We have just completed the Cragar StarWire Rim for you. Here is the link. :-)

https://cults3d.com/:3699084

Hi, I’m sure we can give that a good go for you. There’s a few we have to do first, but I’ll let you know when ready. :-)

Hi KevinRoc14, We have just completed the Toyota Fortuna Rim for you. It's not perfect, but its as close as we could get it with out system's capabilities. You can check it out here. https://cults3d.com/:3698429

Here you go. :-)

https://cults3d.com/:3646749

thank you my friend.

You are most welcome!

We’re happy to look into this for you. We’ll let you know when ready

Hi KEVINROC14, we have just created your requested rim. It is known as the Lenso Axis Neo and can be downloaded here.

https://cults3d.com/en/3d-model/various/next-gen-rim-lenso-axis-neo-real-rims-for-scale-model-cars

Thanks !!

As the rim face integrates with the outer rim as part of the original design, I don’t believe a deep dish option is possible on this one.

Unless… maybe the rim can be redesigned slightly? Leave it with me and I’ll see if I can come up with something.

Hey PitstopCustoms, i had a play around with the design and have come up with something i think would work. Check it out!

https://cults3d.com/:3542886

Looks good to me. You’re the best thank you

Stop it… 😊 no, go on! Lol

(You’re welcome)

I thought we did, but maybe we don’t?

We have a Facebook page which is

https://www.facebook.com/scale.model.wheels

And use the hashtag #ScaleModelWheels

Cheers mate

Hi ASSCCLOTHING,

sorry for the delay in replying, I had to research what a Redcat Caprice was. I see it’s a 1/10 scale remote control. Their wheels look to be screwed on and I’d say the rears will have a hub that locks the wheels so they turn.

Our rims will need to be modified to allow them to work, but I’d say it’s possible…

We have a FREE Next-Gen rim you can download and play around with.

https://cults3d.com/:2239516

The main areas you’ll want to look at is
- the center of the rim needs clearance for the axel
- the rear hubs will need separate adapters for the front and rear rims
- the outer rim will require a profile so they hold a rubber tyre

These are things we can help with.

Let us know how you go.

Happy to discuss this with you. Unfortunately your email isn’t complete. If you’d like to email us, we are happy to reply. scalemodelwheels@outlook.com

Hi Davmon, thanks for the message. We hope to one day cover a good majority of wheel options, but it is a slow process. If you have particular designs in mind, email some pics and we’ll pop them on the to do list. Cheers

Hey mate, I appreciate the vote of confidence, but unfortunately wide body kits are beyond my abilities. There are some great designers on cults3d though, and I am sure someone will be able to assist. :-)

Hi mate. That’s really strange. Yes, please send some pics to Scalemodelwheels@outlook.com

Cheers

sent appreciate you

Hi Allan, I wanted to confirm you received my emails?
Kris

It was great conversing with you. I hope you are able to get the file to print as it's a great wheel design. Cheers mate

like wise mate appreciate the help and reply back thank you

Hey Robert, firstly , thanks for purchasing our rim files. It is greatly appreciated.

Originally the plan was to sell digital files as well as giving the option to purchase prints, however this has never eventuated.

Unfortunately I don’t have any recommendations for the US, however i know there are people in my home town (in Australia) that advertise their services on Facebook marketplace. You might get lucky and find the same.

I’m really sorry I couldn’t help more, and hope you’re able to find someone who can print them for you.

At this stage I don’t have one, but can pop it on the list of designs to complete. Have you got a specific style in mind? If you find a pic, send a link and I’ll get to it

how do i send a pic?

You can either save a link via this chat or email us at Scalemodelwheels@outlook.com

Cheers

Hi Boss Lady. We actually have the Status Grinder rim designed in both our standard and Staggered design sets.

The design is quite robust and ready for printing.

Unfortunately at this time we do not offer a print service.

You can view and download the file by clicking the link below.

https://cults3d.com/:3265778