Have a question for you on your design 1832327. how does it hold up using pla+? Have you printed it any other filaments? I ask because I have some PLA-CF from a prior project. I was curious how it might hold up.
- 0 curtidas
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇺🇸 País do usuário: Estados Unidos
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Escreva a sua mensagem:
17 comentários
I printed all of my holsters from PLA+. My Hellcat holster has held up for more than a year of daily use. PLA-CF will work well too.
- 1 curtida
this is about the 3d-model various holster-for-small-frame-taurus-revolver-3-inch qustion can u please fix this file it says the destination path is to long too rename the compressed folder if not can i please get refunded
- 0 curtidas
Sorry it took so long to get back to you. I was away from my computer. Have you tried changing the name of the file before you download it? If you make the name shorter it should work. If it doesn't, I will rename the file on my end and see if that fixes it for you.
- 0 curtidas
i was wondering if you had anything SA hellcat pro
for mounting in youre vehicle?
- 0 curtidas
Hey! I was just curious if you would be willing to make a support for a 1911?
- 0 curtidas
Any Chance you can make a Beretta 92X performance holster?
- 0 curtidas
anything for PSA Dagger full size s
- 0 curtidas
hello I purchased your grips for the ranger ii and they fit great but i thought they were a little too big for my liking. I was wondering if you would be able to make some grips like the ones ive linked. i would purchase them!
https://revisioncv.com/products/grips
- 0 curtidas
Thank you for the idea. I will see what I can do. I will message you if I get make another grip.
- 0 curtidas
Thanks for the quick reply.
Anything is better than what Taurus made for the gun.
Here’s a link to an original Taurus grip that they don’t make anymore.
https://www.taurusarmed.net/attachments/imag0085-jpg.22711/
This would not only be perfect, it would be world famous if you could make it.
Note that it is a full 3-finger grip.
Please make one like this if you can.
Regards,
John
- 0 curtidas
I noticed that you have some different grips on your Taurus.
I have a Taurus 605 Stainless that I need larger grips for (big hands).
Do you have any drawings available for Taurus 605 / 85 grips?
If so, please let me know.
Thanks,
John
- 0 curtidas
I am experimenting with larger grip designs. The one you see in the picture is surprisingly terrible. I will let you know if I make something good.
- 0 curtidas
Any chance I could get this grip STL, so that I could take my swing at modifying them ? I am having trouble drawing the tang of the frame for a baseline to start making grips. If you have that down would you mind if I use yours as a starting point? TIA
- 0 curtidas
Thanks for buying my design. Sorry about the problem. I will get onto fixing the design and will send you the update soon.
- 0 curtidas
Hello, I was just wondering if you had the version of the small frame Taurus holster without the cutout for laser sight but for 2" barrel. I have the Ultra light 856 in 38 special. My son has the 856 in .357 with a 3" barrel, again without the cutout for laser sight. Is it possible to drill and mount a belt clip to the holster for daily carry? thanks,,
- 0 curtidas
Let me edit my question, My Taurus is the 856 in .38cal with 2" barrel. My son has the model 605 in .357 with the 3" barrel. No laser sights on either. thanks. So sorry for the confusion.
- 0 curtidas
Your revolvers will fit in my holsters even without a red dot mount. I have a model for 3 inch and 2 inch revolvers. Look at my other designs and you will see it there. Or search for "holster for small frame taurus revolver 2 inch".
- 0 curtidas
I'm looking at the deep concealment holster for the hellcat. I'm picking up a Hellcat Pro later this week. Wondering if it will fit this as it's obviously designed for the Micro Hellcat. Asuming it will since it already allows the front to protrude and the grip could just stick out as well.
- 0 curtidas
Yes, a Springfield Hellcat Pro will fit. I recently got the 15 round magazine for my Hellcat OSP and it works well with the longer grip.
- 1 curtida
Just giving you an update if you are still interested. I wasn't satisfied with the original belt clip design so I made another version. Also made a version that micro red dots will fit inside.
- 1 curtida
Have you posted it up? Id love to check it out, I did decide to mount a romeozero on my pro so having the room for the door is necessary!
- 0 curtidas
I have posted it. I just checked and yes, the romeozero will fit.
- 0 curtidas
I finally pulled the trigger on grabbing this holster. It did not fit my Hellcat Pro. I shoved it in as hard as I could and the trigger guard area snapped. My Hellcat Pro trigger guard is 12.8mm. Could you make a new file specific for the pro?
- 0 curtidas
Yes. Taurus uses the same frame for both of those revolvers. They just drill different size holes in the cylinder for the different caliber.
- 0 curtidas
Would the 605 holster fit the .22 LR
Taurus 942 Sir?
- 0 curtidas
Would the 605 holster fit the .22 LR
Taurus 942 Sir?
- 0 curtidas
Would the 605 holster fit the 22Lr 942 Sir?
- 0 curtidas
this is about the 3d-model various holster-for-small-frame-taurus-revolver-3-inch, I was wondering if you'd be able to send me the CAD file? I'm trying to design a different clip for it if you don't mind.
Thank you for buying my model. I updated the sales page. I think you can download the files without paying again. Let me know if it works for you. Merry Christmas and happy new year!