The fenders for trx-4, they are for 1/10 scale, and fit tr4 sport?
- 0 curtidas
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇪🇸 País do usuário: Espanha
🌐 Idioma preferido do membro: Russo. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Escreva a sua mensagem:
15 comentários
Yes, the fenders are for 1/10 scale, and fit for TRX -4 sport.
- 0 curtidas
I got it. Thanks a lot!
- 0 curtidas
Also, thanks for your help! :)
- 0 curtidas
I was glad to help)
- 1 curtida
You can buy it for 1 euro via the link I sent you. it's a purely symbolic fee. it was not hard for me to help you)
- 1 curtida
Ok. The one with the largest lip worked fine. The other two didn't fit correctly. How much do I owed you my friend? Also, I tried to split the files in Orca Slicer but it didn't do it. Do you think you can sent me the FTL file for the one that fits? Of the 3 in the picture in Orca slicer is the one on the right with the larger lip. https://ibb.co/cbGBGGL
https://ibb.co/6XWm4nR
- 0 curtidas
Two of them look a bit different looks so I will print and get back to you.
- 0 curtidas
Two of those i alreadt downloaded from thingiverse. The other one has only two holes for screws. I haven't print anything yet. Can you make one with the meassures i sent you?
- 0 curtidas
I really don't need to use a box for the receiver. It might be too tall. I do have the box I printed so I might try that one. I have another one I could try but I'm just thinking no box. Even though the hood opens I want to make sure it doesn't hit the hood. I think that as long as I can place the receiver and the power button it should work. I actually have a mount for the fusion pro ESC and the button in one so I might give that a try.
- 0 curtidas
Give me your email address and I'll send you a few mounting plate options, maybe something will work for you.
- 1 curtida
- 0 curtidas
Here is the link for the sizes. Don't go by the size of the card since is not accurate. I just wanted to show the sizes on each side. I tried to show the 5m difference between the back and the front holes. https://ibb.co/pPhVsY6
https://ibb.co/9GZ1kcn
https://ibb.co/V39xxnZ
https://ibb.co/vwcntZB
https://ibb.co/dBWZbsP
https://ibb.co/mykgC4k
https://ibb.co/8P8GRnd
https://ibb.co/tL13xf2
- 0 curtidas
I mean, there are a bunch for servos but I really don't need that but just some flat plate. that would fit my receiver or the fusion pro on button. Of course, I can mount the fusion pro on button on top of my servo, which I did with another defender, but I rather have a larger area for more options.
- 0 curtidas
Okay. Then I need the dimensions of the plate and the distance between the centers of the holes for mounting this plate. Also do you want to place the box for the receiver on this plate and the fusion pro on button or just a receiver without a button?
- 0 curtidas
I just want to place the receiver there as well as the power button for the fusion pro motor so it can be flat. The receiver is 35x34 mm. The holes by the servo are 71mm apart the distance between the rear holes, the ones by the servo, and the ones in the front is 31mm. The distance between the front holes is 65mm. The holes by the steering servo are lower than the front by about 5mm. I’m thinking 85x45mm should do it. We could stretch it to 90 but I think that would be cutting it close so I think 85mm wide should do fine. I guess the only issue is to make sure the hight is the same for all the holes so the rear holes on the plate, the ones by the steering servo, are 5mm lower than the ones in front. That size should be sufficient to house both, the receiver and the power button. I’ll send you some pictures showing the sizes roughly.
- 0 curtidas
I tried another one but is too wide. https://www.thingiverse.com/thing:4973044
- 0 curtidas
That plate does not fit on the front of my truck. I have that plate installed on Blazer and the Bronco 21 but the defender doesn't have the screw holes like that. If you look at the screw hole positions they are different, even without the dreamteam fenders. I would have to be some flat surface with holes that fit the existing holes on the front. I tried printing this plate that just use the existing chassis rails, but the fenders don't let it fit. That would have been fine. But that's the idea, preferable using screws of course. https://www.printables.com/model/135064-traxxas-trx-4-front-accessory-tray
- 0 curtidas
Here are the links for the pictures: https://ibb.co/80x1fnn
https://ibb.co/18y8BzN
https://ibb.co/xS93HKs
https://ibb.co/t83C7M8
https://ibb.co/DwvQy1N
https://ibb.co/p19NDwN
- 0 curtidas
you want something like this?
https://ibb.co/3WJ7Vd6
- 0 curtidas
I would l;ike to ask you a question. I decided to replaced the motor and receiver on my RCDream Defender project because the BEC really doesn't fit my needs. I was wondering if you could model a small tray to mount on the front of my chassis. The problem is that the ones I found do not fit because I have the interior installed, and that one comes with the front fenders specific for the RCDream Defender. I 'm trying to mount the Prolink receiver on the front so I can have more space since this body leaves very little space. Ii not a large plate but a small one. I can send you pictures of my setup togive you a good idea.
- 0 curtidas
Hi. Please send me a photo so that I can understand the task.
- 0 curtidas
Hello. I'm looking for a receiver box that is a bit longer for my TRX4 Defender so it can hold the BEC. I have the larger Traxxas box but is too tall and my RCDream Defender body would not fit properly. Does this box you have here is longer than the stock? I don't want taller but a bit longer for the BEC. Thanks
- 0 curtidas
Hello. My box is the same length as the standard one.
- 0 curtidas
Hello, do you have a file for the injora fenders for the trx4 that fit rock lights too?
Hello. I don't have one, but I can make one if necessary?
Can you make it , because i bought some rock light from aliexpress that i put on the stock fenders and i cant put it on the new back ones
ok
can you make it like this?
https://imgur.com/a/9TrhACd
Okay, I'll try)
Hello. I apologize, but I haven't been able to complete the updated model design for you. I haven't had the time. If it's still relevant to you, I can complete it in a couple of days.
Hello, don't worry, take your time. I have tried to make something for myself but i didn't work because i don't have experience with 3d modeling. Take your time, i am not in a hurry.