Hello friend, follow my page, create cars for 3D printing
- 0 curtidas
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇦🇷 País do usuário: Argentina
🌐 Idioma preferido do membro: Espanhol. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Escreva a sua mensagem:
14 comentários
Thanks for buying my fletching jig. It means so much. I hope it works out for you. Be sure to check out the instructions on my website and the helical clamp upgrade. If you need any help then contact me there. Cheers
- 0 curtidas
Hi, how are you?
Thank you for making this spectacular design available!
Unfortunately I have to consult/ask you for something. I saw that the method of union/fixation between the body and the clamp is by means of neodymium magnets (difficult to find where I live, I am from Tucumán Argentina). In the Upgrade you used a different method that is 100% printed, is it possible that you provide only the necessary parts to be able to assemble the vertical featherer but with the new method of union/fixation for the straight clamp?
My English is a bit rough and I use the translator, I hope you understand what I'm asking
Thank you very much in advance and I am waiting for your answer
- 0 curtidas
Hi. I am sorry, I did not notice that you replied here too. Good luck with the upgrade pack and happy fletching. ☺️
- 1 curtida
hola sos de argentina?
- 0 curtidas
Hola, si, soy de argentina.
- 0 curtidas
recibes transferencias?
- 0 curtidas
Si, puedes pagar por transferencia (los archivos se envían una vez acreditado el pago).
Escribime por el Instagram (figura en mi perfil)
- 0 curtidas
Hi i bought this file but I'm really new at 3d printing..when i try to create it the cutter and stamp stick together in certain sections and it is hard to separate. Can you give any advice on how to fix that or even separate them?
Thanks
Malika
- 0 curtidas
Hello Malika, first of all thank you very much for buying my files.
About what you tell me, what is most likely happening is that the margin of error that your printer handles is greater than the separation with which the file is designed.
I upload the file with the two parts separately, in case you continue to have problems printing it with your printer, let me know and I will edit the file with a larger separation for you.
Again thank you very much
- 0 curtidas
Hello again
Thank you so much for separating them! This will make it alot easier for me! :)
- 1 curtida
Hola hablas español?
- 0 curtidas
Hola, jajaja si!
Te paso el email de contacto (ya que estamos escribiendo en un hilo publico) bushido3d@gmail.com
Estoy atento a lo que necesites en temas de cortantes/stl
- 0 curtidas
gracias por tu subs.
- 0 curtidas
Hello ARTESDASI, in the "orders" section you get all the files that you downloaded / purchased, the "view" option allows you to download it again.
In case you still can't download it, tell me what file it is and I'll give you a temporary download link.
Thanks to you and I am attentive to your response.
- 0 curtidas
HI. DO YOU HAVE MORE PRINCESS DRESSES AND IF SO CAN YOU TELL ME IF I COULD CHANGE THE CM FOR INCHES PLEASE I NEED THEM 3 1/2 INCHES AT LEAST. THANKS EILEEN
- 0 curtidas
Hello how are you doing?
First of all thank you very much for your question, excuse my basic English.
I think I have one more model, if so, it will be published in 2 hours at the most.
If you have any particular model you want, you can send me a message with the image and I will draw it.
As for the measurement, if it is possible (it is approximately 8.5cm, which is a measurement that I usually make cutting)
I wait your answer
- 0 curtidas
Hello good afternoon, I couldn't download it from the file I bought. Would there be a way to download it? Already thanks for listening
- 0 curtidas
Hi, you bought from me one or more sets of cookie cutters, I have an offer for you. More than 800 pieces (160 collections) on various topics. Cartoons, films, etc. At a very competitive price. Contact me if you are interested
- 0 curtidas
I see that you have followed or liked my models on Cults3D. I thought that you might like to know that you can have access to my entire catalog of STL files on Patreon for only $9.95!
www.patreon.com/Zandoria
Thanks,
Will
- 0 curtidas
hello,
I consult you: despite the error, could you print the previous file?
New Fille
https://www.dropbox.com/s/4wtmuzj216h75p3/Globo%20Aerostatico.stl?dl=0
sorry for the delay in answering, I still do not understand well how Cults works
- 0 curtidas
Hello
Thank you very much for the purchase!
I already check the file and write you with the news
What program are you using?
- 0 curtidas
Hi there,
I bought your Hot Air Balloon Cookie cutter, is has mesh erros, could you fix it, please?
Thank you.
- 0 curtidas
Hi, I’d like to introduce you to Real Rims Australia.
We offer a specialty selection of Factory OEM rims from Australia and around the globe at an affordable price.
Follow our page to stay up to date with new designs as they become available.
And if there is something particular you are chasing, we can help with that too!
Happy Modelling!
https://cults3d.com/en/users/Real-Rims-Australia/3d-models