94 comentários

Unfortunately not. All edf jets in this size need lightweight filaments due to density. The LW-PLA or LW-ASA materials are recommended.

ok thank you

Absolutely all our models have all the components mounted - not glued. The model can be fully glued and at the end all the components can be installed or removed freely.

Thank you... and are there alignment pins for the fuselage and wings?

The M346 has so complex fuse shape - that the pins are not needed. The fuselage is more flat than round - so I have not added any for this particular model But these are possible.

We will prepare Tempest test pckage

https://cults3d.com/en/3d-model/game/hawker-tempest-test-files

Hi, I'm sorry... I though I had selected the plane... I was looking for a test package on the CL-215 / 415. It is possible to get a test package for that plane? Thanks very much.

Oh - absolutely. It will be available shortly

Here it is: https://cults3d.com/en/3d-model/game/cl-215-test-files

That's excellent... thank you. Cheers.

Thank you for the CL415 test files. I know it's labelled as beta, but just want to let you know that the file CL415 _FS1b_beta is not slicing nicely. I'm not 100% sure of the settings, but Spiral Vase Mode, zero top and bottom layers.

6mm

Perfect, thanks!

Yes - I need to dig out it from my archives.

Here is it: https://cults3d.com/en/3d-model/game/pzl-230-skorion-scale-model

Hello. We can try. What are your exact expectations? Please send us email at aircombat3d at yahoo.com

Which model do you have in mind?

Hi I mean the Dart 50

What slicer do you use? Which specific part you are experiencing issues with? Turn off the even-odd method. There may be some overlapping bodies within STL but that is not preventing the parts from proper slicing.

Hi. I have Simplify 3d and Creality Slicer

And Errors are in Simplify? - this is because simplify tries to recognize all walls within the STL (equivalent to even-odd setting). Does Creality also show errors?

Hello,

No, Creality isn't displaying anything. Simplify isn't displaying any errors either. I'll try again with different settings.
Is there already a 70 or 90 mm EDF version available?

Hello,

I need the holes for the EDF unit to be 55 mm. (Dart 50)
Can you change that for me?
Unfortunately, I have already printed the model completely without scaling it because I thought everything would fit.

Regards

Elmar

Can you please send photo to aircombat3d at yahoo.com showing which dimension you are referring to?

Hi. I have send it for a few days but it com's now answer.

Please check your email - files have been sent out today.

Generic items: 9g servos, self tapping screws for servo mounting 1.2 - 1.5mm size. 1.5mm wire for pushrods, wire barrels to security the wire to servo armament, 1 electrical barrel to connect 2 elevator pushrods. Hardware to connect motor to firewall - m3 screws and nuts. M3 screws and nuts to bolt the wing to fuselage. Rubber band to secure the hatch lock. 1.5mm 1m long CF rods or Alternatively 1.6mm nylon trimmer line for grass, or 1.75mm filament straps for reinforcements along the printed sections.

Please check again. There must be directory with wings. If you cant locate it then yes - 40mm version can be scaled up by 125%

These were intended for 1.5mm CF rods. If not available steel wire should work too. If you have 2mm steel wire then cut it on angle, and using hand electric drill you should be able to "drill them out" and use the 1.75mm filament as guides - running along the entire structure to provide x-layer reinforcing.

Please post pictures to rcgroups build thread or send via email to aircombat3d@ yahoo.com

The closing radius should be set to 0 001. Otherwise the tubes will be self standing and not connected to outer skin. Please check this parameter.

I've been using these decals: https://www.napolskimniebie.pl/iar-80#galleryName=productGallery,imageNumber=9

Basically there are 2 sizes: 350W+ planes ( 1m span and up) and 200W planes (under 1m span). So there are only 2 sizes of the motors needed.

Model can be printed basically in any material. If you have LW-PLA handy then just change the material in the Bambustudio and everything will be just fine. Or keep it in PLA. You can print both versions and compare which one flies better and suits your type of flying.

Hello!, thank you for your inquiry - which model exactly do you have in mind? Majority of the released models have the build manual attached - you can check it by downloading the test files. They are in 1:12 scale so if the particular model has no test files available - please check another design with test files.

Please scale it by 1.25 (125%)

We will inspect this issue. You can post the pictures on rcgroups dedicated thread. Or in makes section of this model.

There is no need to purchase EDF with different directions. At this scale model flies very well with no bad tendencies.