36 comentários

Hi Ben, I'm sorry if I've caused you any trouble. I understand that creating designs takes a lot of time. I didn't purchase any of your designs; I modified one I found online without logos, added some details, and adapted it to the IKEA planter. If you say it's your design and someone shared it elsewhere—since I haven't purchased any of your designs—I'll remove them without any problem, and I apologize for any inconvenience caused.

Previously, you purchased my Air Max 95 model and asked me to create a custom left shoe version specifically for you. You were the only customer I made this left version for, so I immediately recognized the source of this design.
I hope you can understand my position. I chose to let this go in the past and did not report you, because I wanted to handle the situation in a friendly and respectful way.

I'm sorry, but I've never spoken to you or asked you to design anything for me. I used a model I found online that didn't have any logos, applied a symmetry modifier in Blender, and added the logos afterward. As I told you, I don't know if the design I found is yours. If it is, I apologize, but I didn't buy it. In any case, I've already removed them.

Muchas gracias me alegro que te guste, es para la planta artificial Fejka de 6cm de ikea, no tengo las medidas a mano pero esta noche puedo sacarlas con el calibre si las necesitas

genial, con ese dato creo que puedo seguir, igualmente si te acordas dps pasamelas , saludos.

buenas, como estas?, si podes pasarme medidas seria de mucha ayuda, gracias

Buenas perdona por la demora, las medidas son diametro inferior: 21.2mm, Diametro superior 27mm, Altura 26.5mm si te interesa te podria pasar el stl que utilizo para hacer el hueco, si lo quieres escribeme a blessedape@proton.me y si te interesa alguno mas de mis diseños dime cual en el email y te pasare un codigo de descuento

Sure, it's mainly the Bambulab matte PLA range, but I'll send you the specific links on Patreon.

Right now, I only have the Campus models on my MakerWorld profile: https://makerworld.com/en/models/2384498-adidas-campus-00s-hype-planter# profileId-2611529 and the Superstars here on Cults. I was planning to make the Sambas, but for now I have other projects lined up. Thanks for the suggestions—I might make one of those later, maybe the Sambas... Keep an eye on my profile

Hi, I'm glad you like them! You can send me more details at blessedape@proton.me

Hello, which model are you referring to?

AM95 Green Neon planter L&R

I haven't tried it with this model, but I did a test with the Dunk and Travis' Jordan 1 Hi, and they work, but the level of detail is greatly reduced.

i emailed you last night, can you check and reply and i will show you a picture i got

did you get my email?

Hallo, beide versies zijn inbegrepen.

Als je het bestand heb gekocht mag je het dan enkel voor privé gebruik gebruiken of ook eventueel om te verkopen?

Als je het koopt, krijg je een licentie voor privégebruik. Als je geïnteresseerd bent om ze te verkopen, heb ik een Patreon-abonnement voor mensen die mijn ontwerpen willen verkopen. Als je alleen geïnteresseerd bent in dit ontwerp, raad ik je het zilveren abonnement aan. Als je geïnteresseerd bent in meer van mijn ontwerpen, raad ik je aan om The Hype Way te bekijken. https://www.patreon.com/BlessedApe/membership

Bedankt voor de snelle reactie ik ben opzoek naar tasjes vooral waar kan ik bekijken wat je allemaal aanbied?

Het was voor het geval je ook geïnteresseerd was in sneakers, als tassen heb ik alleen de Birkin en deze Jacquemus, die is niet zo top als de Birkin, maar hij is gratis ;)
https://makerworld.com/en/models/1252435-jacquemus-flower-bag#profileId-1275204

Hello, I'm sorry, but I didn't make the right foot for this model, and doing so would mean removing the logos and redoing them on the right pair so that the text isn't reversed. It's really quite a lot of work.

Hey Bro, I would really need it and if its required I can pay for another shoe. I really assumed I would get 2 shoes in the model so If youre able to do this it would really help! Preferably within the next couple days. Thanks a Lot!

Hey Bro, So can you do it??

Yes, I can do it, but I don't have time during the week. If you want, I can do it this weekend, but you would have to pay for the design again.

Yeah bro can you have it done by sunday, and can you make it 10 or 15 instead of 20? Thanks so much!

Hello, I have it ready. Please email me at blessedape@proton.me and I will explain how to download it, because until I reprint them and take photos of both pairs, I will not upload the public L&R pack, but I can create a private link so that you can download it now.

Hello, first of all, thank you very much for purchasing one of my designs, but this one does not have a flat sole. The Travis AJ1 has the same sole pattern as the authentic one. If you look at some of the designs, you will see that they are labeled “Flat Sole.” Those are the ones with the smooth sole. If you don't want to mass produce them, you will just have to remove some supports, and if you are thinking of selling them, I encourage you to check out my Patreon. There is a road map where you will receive some of the most iconic sneakers in the world every month.

okay I understand I found a way to print it good after 3 4 tries but I also wonder is there any better way for the back logo to keep on the shoe because however i tried to print it, it keeps falling off with the support

That's strange, I haven't printed this model in a while, but I made several of them at the time and didn't have any problems. You're the first person to report this to me. Can you send me some photos of how it turned out to blessedape@proton.me so we can figure out what's going on? I still have the first one I printed. If you want, I can send you some photos so you can see what the result should look like, both the sole and the back. What printer are you using? Are you using the 3mf profile or importing the stl to your slicer?

Buenas, claro puedes escribirme a blessedape@proton.me

Hello, first of all thank you for your purchase! no this model was designed to use the typical foam where you put the artificial flowers and does not have the bottom, I have made a new version in which the top of the bag is open and this if the base is closed I will upload it in the coming days, I will add it to the one you bought so you will have both versions.

merci de votre réponse j'attends la nouvelle version avec impatience

I've already added the new version. Sorry for the delay, I hope you enjoy it :)

No entiendo tu comentario, ya se que has comprado el diseño, también se que lo subiste a makerworld sin autorización si quieres menos soportes selecciona la opción solo "soportes en regiones criticas"

gracias, disculpa por compartirlo pero ya fue hace mucho tiempo y despues de tu mensaje lo borre, pronto comprare algunos de tus modelos como compensacion, lo siento

Hello, sorry for the delay in answering, soon there will be some models with flat soles available for everyone, the military blue among them, they will include the left and the right one.

sorry for the delay, I don't quite understand what you mean, the superstars has a flat sole, no supports and a great grip on the bed.

Sorry I mean does it have an accurate tread pattern like the real shoe?

you mean the AJ1? if so it takes 2 days and 15h and it takes 1200g of filament to make 2 sneakers. if not, tell me which model you are referring to and I will tell you, thank you very much for your support.

Awesome are those numbers for the smooth bottom? I want to buy 4 different files. Two 4s The 1s and a Travis low. Is there a easier way to message you? To figure out something.

I hope not, there are many people who use it

hello, I'm glad you like them, no, when you buy them you can use them for private use, if you think of selling them I recommend you to look at: https://www.patreon.com/BlessedApe

Hi, yes, it is matte filament, all bambulab

thanks!