431 comentários

That makes sense, thank you

Thank you for the fast response. I did not explain myself well I'm wanting to retain the base top and bottom parts that hold the glass lid and sit in the printer. I just want to cut out the middle portion of the base where the vents are. I will see if I can make the adjustments infusion and then send you the file to get your thoughts. I understand removing the base where the lid rests and where the riser fits into the printer top will make it unusable.
Thank you again for your quick response!

Hello Darren,
I just purchased your D3P Riser for H2C model and am excited to start work on it. I am thinking about modifying the model slightly and wanted to get your thoughts on whether this will effect its functionality/ability to use the add-ons.

The vented base of the riser strikes me as being unnecessary for my H2C due to the automatic top vent on the printer. If I remove the vented portion in Fusion 360 (assuming I am able to do this) and just leave the top slanted part of the base where the glass lid rests and the bottom slanted part of the base where it rests on the printer will this effect the functionality of the riser and add-ons? the overall result will be to shorten the riser by the amount of the vents.
https://ibb.co/6RYTWQ06

I am thinking about this modification for the following reasons
1. The vents seem to be designed for other printers without the Auto Top Vent of the H2C
2. Reduce any chamber heat loss from the vents (assuming there is air leakage when the vents are closed)
3. Reduce over filament needed

I realized I am overthinking this but that's what 3D Printing is to me, making exactly what I want.

Thank you for your time.
Eddie

Hi Darren,

I purchased your 3D Riser for H2 series and absolutely love it.

I have it on my H2D and it works exactly like I imagined it!!

I recently purchased an H2C and would like to see if you have a modified file that only has the 2" glass riser with no AMS shelf system? I would like to put that on my H2C and then a Double Stack AMS System on top as I don't have room to go wide.

Thanks,
Frank

hi Darren
do you have a model for a spool holder but for the left side of the kobra s1

thanks in advance

Hello Darren,
I'm new to the the 3D printing. I purchased and downloaded the Plus 4 riser you created. I wasn't smart enough to download all the files for it the first time. Now I went to go back to get the instructions and it is requiring me to pay again. Would you be so kind and sharing all the files for your riser for the Plus 4 with me. I thought once you make the purchase you would have access to the download file section ongoing. Please let me know if you need anything to send me the files.
Thanks Scott

Hi how to I get files to print on a kobra s 1 for the complete ace pro side by side holder pls as I never downloaded before

Hi there. Are there any plans to make a riser/shelf sytem to fit the Elegoo CC?

Hello, thank for your amazing design. I purchased it last night and I was wondering if I could mix PLA with PETG parts. I hear PETG is better for parts that are going to be exposed to heat and I was planning on making the big parts on that material. Thank you again

I don't know how to multi-color print yet. I would rather use the drawer fronts that use different colored inserts like the side.

Hi im confused as to what you get for the price as there is alot of pictures do you get it all or is it per item ?
Thanks

Hi Darren,
I printed your riser for the q2 some days ago. I am really loving it! However, there seems to be one issue with the PTFE tube hole in the back of the riser. For me, the hole was positioned way to high so that the angle of the PTFE tube leading into the machine would not allow trouble free loading and unloading. The gears of the box would not be able to push or pull the filament because of the unfavorable angle of the PTFE tube, as soon as the filament enters the back of the machine. I drilled another hole in the riser at the same position, but lower in height. This way, the PTFE tube is entering on pretty much the same height as the cable routing of the print head. This makes loading and unloading work reliably again.
Did you get this feedback before? Did not want to comment this on the product page, as I am not sure if this is only a me-problem.

Accidently paid for the wrong printer file set I need the riser set for p2s not H2 any help would be appreciated

Thank you for your creations

Hello, I purchased your D3P riser for the K2 plus and I am having a problem with one of your files. So I started printing yesterday. I have two K2 Pluses. I started out printing the rear right and the rear left. The rear right printed with no problem on the K2. The rear left Im having an issue. Ive tried three times to print it now and at 23 percent complete it fails. Im getting an x axis out of range fault. I tried twice on one printer. I thought maybe my printer was having issues. Then when the rear right was done I tried printing the rear left on that one and it just failed again. So thats two different printers with the same problem. Can you look into this for me please? Ive used quite a bit of filament already. I dont want to keep trying this and not get any farther. Thank you.

Will you have a QIDI and X1/P1 Lite version soon?

how do i find the build plates description to see what supports are needed?

For the dual AMS riser roller. The rear bar has one end that does not fit into the roller side component. The triangle is larger on one side than the other.

Hey, I've got the plus 4 and I've got your riser in it, I've got some nylon filament the sent me (influencer on tik tok @mysmoosh) and I have to print it using the external spool holder, being that this is a hard filament I'd like to put the holder in the left side to feed directly into the side port, but it seems the one you have for the q2 is located on the opposite die of the feed, maybe I'm wrong, but is there a way to hang it off the left side instead of the right side?

Доброго дня! мене цікавить підставка для Bambu lab h2c для AMS 2 Pro×2 шт. AMS HT

Hi Dareen, question
I locked left vent and while pushing it, it broke in a way that I cant retrive it. Its tight and wasnt moving good at all (didnt move any axis). Is there a way to remove it, or I need to reprint whole left side? :D

Paid for the kobra s1 riser and I'm missing the code for the green pieces that go on the draws.

hey was wanting to see if had any other accessories for the anycubic kobra 3 max and kobra 3 over head mount need something the tubes
not to be going every where can you help or has anyone design anything to fix this based on your design

I would like to send you a photo of the result. Is that possible?
If so, where can I send it to you?

Thanks for the design.
The project printed perfectly. I used HT PLA GF from Polymaker, which offers very good temperature resistance.
No problems during printing. I used your settings.

Now printing the accessories.