Pular para o conteúdo
CrittersTerritory
@CrittersTerritory
Conta certificada
O que significa o símbolo «Conta certificada»?
Conta certificada
Compartilhar esta conta

From the moment I first encountered 3D printing over six years ago, I was captivated by the endless possibilities it offered—a world where imagination could be transformed into something tangible. Since then, I’ve poured my creativity and skill into designing models that aren’t just objects but experiences waiting to be brought to life. Here on Cults3D, I’m thrilled to share these meticulously crafted designs with you, each one ready to take your print bed on a journey of innovation and artistry. Join me, and let’s make something extraordinary together!

Popular Vendedor Baixador Comprador Influenciador Designer

👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇱🇰 País do usuário: Sri Lanka
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.

Escreva a sua mensagem:

👉 Faça login para escrever uma mensagem

39 comentários

mrenton
mrenton

I have been trying to find a way to communicate with the person who created the great Hairy-nosed Wombat model and can't find out how to do it.
Can anyone help me with that?
Thanks if you can!

CrittersTerritory
CrittersTerritory

Hi, Sorry for late reply.
How can I help you sir/ma'am

mrenton
mrenton

The model is vey good, but the proportions are a bit wrong.
Their bodies are a bit wider and their legs are a bit shorter.
Is there a way the model can be tweaked a bit?
I can provide suggested change percentages if that helps.
-Thanks!

CrittersTerritory
CrittersTerritory

Hi,

Thank you so much for the feedback — I really appreciate you taking the time to share it. I’m glad you like the model overall 😊

Yes, the proportions can definitely be tweaked. Adjusting the body width and leg length is absolutely possible. If you’re able to provide the suggested change percentages, that would be very helpful and will allow me to fine-tune the model more accurately to your preference.

Looking forward to your suggestions. Thanks again!

  • 1 curtida
mrenton
mrenton

I will do some measurements from photos and work out the change suggestions.
Happy to test it, then.
Our Wombats SA supporters will be pleased to see the results. 🙂
I will be in touch in a few days.

  • 1 curtida
mrenton
mrenton

I have been trying to find a way to communicate with the person who created the great Hairy-nosed Wombat model and can't find out how to do it.
Can anyone help me with that?
Thanks if you can!

CrittersTerritory
CrittersTerritory

Hi, Sorry for late reply.
How can I help you sir/ma'am
mrenton
mrenton

I have had a successful 50% test creation of the flexi-hairy-nosed wombat I purchased and downloaded several months ago. 🙂
It's great!
I have some brown filament now and will start a larger print tomorrow.
I work with live hairy-nosed wombats and would like to get the proportions more accurate.
Can you help with that or is it possible for me to tweak the proportions of the model?
Please advise the best way to do this. I am a beginner.
Thanks for your help.

  • 1 curtida
ayubindustries
ayubindustries

Hey! 👋 I’ve seen your designs on Cults and they’re truly amazing — really inspiring work. I’m still learning and not as good as you yet, but I’m trying to improve and show some of my skills too.
If you’d like to check out one of my latest designs, here it is: https://cults3d.com/:3770044
Would love to hear your thoughts! 😊

  • 1 curtida
MTData
MTData

You used to have a design on Cults: FLEXI MARMOT GROUND HOG NO-SUPPORT
Is it still available? What I am actually looking for is a Flexible Muskrat. My Grandson loves Muskrats. I want to print him one.
The Ground Hog is pretty close. A Muskrat has a thin tail like a Rat

CrittersTerritory
CrittersTerritory

Hi, Sorry for late reply.
it is live again. You can obtain your file here : https://cults3d.com/en/3d-model/art/flexi-marmot-ground-hog-no-support-cute-articulate
Thank you!
rebeccablount
rebeccablount

Hi, Is this file still available? 3D Printed Flexi Crown Thorn Starfish

CrittersTerritory
CrittersTerritory

yes, it is an old exclusive model. you can only obtain the file after join to Patreon

rebeccablount
rebeccablount

I followed the link at the top of your page and created an account, but I am still not seeing the file. I assume that means its only available with a paid account? Unfortunately, I won't be able to get a po for something like that. :( Would you please let me know if it ever becomes available for free download .

  • 1 curtida
ggr878
ggr878

The penguin is super cute. However, it has over a million triangles and trying to print four crashed bambu studio and orca. Can you try to minimize the number of triangles? Thanks for great models.

CrittersTerritory
CrittersTerritory

Hi, Are we talking about .3mf file or .stl file? BTW I've also tested and printed them and I haven't faced any issue. So I'm a little confused 😅

ggr878
ggr878

The 3 mf. Thank you for your response during the holiday.
Merry Christmas!

ggr878
ggr878

here are some pictures:
https://ibb.co/H2ZrXCg
https://ibb.co/CnWpT8d
https://ibb.co/FJZ3PQ5
https://ibb.co/vkQq8jQ

This is using bambu studio. Thanks

CrittersTerritory
CrittersTerritory

Hello,
Extremely sorry for the late reply.
I've just updated files with a Low Polycount model.
Thank you!
Regards,
Critters Territory.

ggr878
ggr878

No worries. I will try again and post the make. Thanks

  • 1 curtida
rgibsoniv
rgibsoniv

Hello! I’m having issues with the tail on the flexi bobcat model. I’m printing a few as my wife’s school she works at the mascot is a bobcat. I attempted both the 1% bigger file and the regular size and the tail will not snap in am I doing something wrong print wise? I set the initial layer at .3 and all other layers at .2 should I force .2 constant?

Thank you so much!

CrittersTerritory
CrittersTerritory

Hello, please try scaling up only the tail about 1% or 2%
layer heights don't have to change. Make sure that your printer working precisely and belts are properly tensioned. otherwise, you will get a different size model than the design. I've never done any scale up or down to the tail when I tested them. All the models are being tested on both Prusa and Bambulab Printers. If you're facing same problem please let me know!
Best Regards,
CrittersTerritory
CrittersTerritory

Wow. That's a really amazing painting!!! please share them with Red Dragon model's makes too :)

christian_jena
christian_jena

sure did :-)

  • 1 curtida
christian_jena
christian_jena

Hi,
now I managed to glue the legs back to the body. This guy looks so amazing. I printed him in 100%. I'm looking forward to paint him. For me it was really tough to cut off the supports. Also the joints of the legs to the body are a little stiff, but I think, it is because my printer is not set up so well. Maybe I try another one later, with better settings
https://ibb.co/K2y8xNh
https://ibb.co/LPbRhx0
https://ibb.co/6DZfw34

CrittersTerritory
CrittersTerritory

It's no need to use supports with this model. But I'm so glad to see the final outcome and it looks great. further more I'm working on your feedback and will upload optimized model soon. Stay tuned!
Best Regards,
Critters Territory

christian_jena
christian_jena

You had already integerated support. I have not activated additional support.

  • 1 curtida
christian_jena
christian_jena

Hello,

I bought the instructions for the red flexible dragon from you (https://cults3d.com/en/3d-model/art/flexi-winged-red-dragon-no-support-cute-articulate).
However, I have problems with the wings. Cura cancels the slicing with an unexpected error.
Are you using Cura & what settings/slicer did you print with? I would be very grateful for your help.

By the way, the dragon looks great. Unfortunately I only have a single extruder, but I will try to paint the dragon afterwards. Unfortunately, I was too stingy with the wall settings for the body, which is why the front legs broke.

Kind regards
Christian

Translated with DeepL.com (free version)

christian_jena
christian_jena

I could solve the problem by switching to Orca Slicer.
Dragon is completely printed and jouned. Just need to fix the legs, then I will Upload some pics

CrittersTerritory
CrittersTerritory

Hello,
I'm using Prusa sclicer with 15% infill 3 perimeters 0.4mm nozzle along with 0.2mm layer height.
Thank you!
Best Regards,
Critters Territory

rmcdaniel2
rmcdaniel2

how small can I print the winged dragon model without losing any mobility?

CrittersTerritory
CrittersTerritory

Hi, we recommend 60%
Indy3Dguy
Indy3Dguy

How many color print is this Trex. Its hard for me to tell.

CrittersTerritory
CrittersTerritory

Hello,
If you're going to print all the parts together. you can print them as 4 colors or 6 colors. But if you are going to print them separately you can print them in 4 colors at a time. :)
BRAT
BRAT

The Winged Red Dragon wings will not print.

CrittersTerritory
CrittersTerritory

Hello,
Please ensure that you have a good first layer adhesion with the build plate. If it is not, try a brim layer. I would like to know what is the problem you you meant by " Wings will not print". Waiting for your reply
Regards,
SD3D
chile62
chile62

Hello, any chance that I can get a commercial license for the moose?

CrittersTerritory
CrittersTerritory

Hello,
Thank you for contacting us.
Yes definitely. You can obtain my permission for commercial selling by joining to my patreon. Here is the link :-https://www.patreon.com/sd3D
Thank you!
Have a great day!
Best Regards,
SD3D.
Rubino
Rubino

Hello , had a problem making the T-Rex , i made It twice and had the same problem whit the Left hand , It breaks when i open It for first time , put some glue yo fix It , but still does not moving good , pleas con you give me a solution ? Thank you

CrittersTerritory
CrittersTerritory

revisaste el calor de la boquilla? Puede que la altura de la primera capa sea demasiado baja. por favor compruébelos y no dude en contactarnos. gracias
Octomore
Octomore

Should I print the Articulated Viper with a brim or any other kind of base layer adhesion settings?

CrittersTerritory
CrittersTerritory

Hello,
If your printer has a good build plate adhesion, no need of any of them. But if it doesn't please use brim or raft to good adhesion.
Thank you
CrittersTerritory
CrittersTerritory

Hello, I actually attached a link to download chess pieces from another creator on cults3d. You can download them for free. Thank you!!

  • 1 curtida
Muzamil
Muzamil

Thank you

  • 1 curtida
STIRLINGSWIFT
STIRLINGSWIFT

Hey! I noticed you downloaded my DeskRover model, if you have any feedback please send me a message! Thanks!
KING-3D
KING-3D

Hello, I invite you to follow my page, I create cars and wheels for 3d printing

CrittersTerritory
CrittersTerritory

Sure my dear friend

Elkinsfamilyschool
Elkinsfamilyschool

Hi! I'd like to try and attempt to print the flexible chess board. I found the link in your description for the chess pieces, what should I scale them at for them to work with the Flexible Chess Board and to fit inside the Rook?

Thank you!

CrittersTerritory
CrittersTerritory

Hello,
You should print them 100% scale to fit them together thank you!

Elkinsfamilyschool
Elkinsfamilyschool

Thanks for responding. I should print the chess pieces at 100% as well? They look huge.

CrittersTerritory
CrittersTerritory

Yes it is. You need minimum 20x20cm build area
Thank you
Grendel_Khan
Grendel_Khan

On your otherwise terrific Red Panda Model, Ultimaker Cura and Prusa slicers both report open mesh elements on the two left legs. In Prusa, the system attempts to repair it but completely fails on the left rear leg. Is there a fix for this? I'm afraid I don't have much skill at modeling these things, just yet.

CrittersTerritory
CrittersTerritory

Hello thank you for your message but I couldn't find such a problem of my model.Btw if you want I will re upload the model to the cults3d. Also please check video of the slice preview window of my model https://drive.google.com/file/d/14qiWUA2L-LRQrcPOWFcGx-LXkdYpNymb/view?usp=drivesdk

Grendel_Khan
Grendel_Khan

Have some screenshots of Cura 5.2.2 and Prusa 2.6.0 alpha if that would be helpful.