👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇨🇿 País do usuário: Chéquia
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Hi, I am missing some files from the the PLA folder:
F_1_reinforcement+motor mount.3mf
F_2_reinforcement+battery mount.3mf
F_3_reinforcement.3mf
I tried converting the .stp files but they did not convert and will not print.
I need you to supply them to me.
Thank you
Hi,
files F_1_reinforcement+motor mount.3mf, F_2_reinforcement+battery mount.3mf and F_3_reinforcement.3mf
are merged into the file F_1+2+3_reinforcement, which contains 3 printing plates. It would be easiest for everyone if you checked the files first and then wrote messages.
The description specifically states that the files contain Orca slicer ready 3MF files for X1C printer and STEP files. I do not provide any other formats.
Best regards
CactusCraft
Here's a tip. provide all files in all the formats. This is not good business, you are not helping your customers. also include .stl files, these are very common and work well.
Oh yeah, thanks for deleting my comments and closing comments from your download page. you will not be getting any business from me.
I don't understand why you're getting upset when the description clearly states that the files include .3MF files for the Orca slicer and X1C printer and .step files. If you can read and know what you want, you can decide if it's suitable for your printing setup or not. I deleted the comment because you wrote that the files F_1, F_2 and F_3 are missing, which is a lie, they are just merged into one file F1+2+3, which in turn supports the theory that you can't read well.
hello please verify your data
Hello, can you be more specific please?
yes, but it is bigger
Bought your cub. Everything perfect except leading edge PCs. They are showing as a round tube is all?
Nevermind the .stp worked, I tried the 3mf. Thanks again. Nice print
Glad to hear that .step works. If you will have any problem, feel free to ask, I will my best to help you!
Hello. I've bought your kart and the upgraded one as well. I'm having issues with the electronics, where i'm going to connect the receiver to have power on it? I've soldered the receiver channel 2 to the back of the ESC and the channel 1 to the servo, is that correct? Thank you for your help. Great design by the way.
Hello, thank you for the support! You should connect battery connector (+ and -) to your esc to power up esc, then you should connect (+,- and signal) from esc to receiver. Now you have power in your receiver. Then connect (+,- and signal) wires from servo to your receiver to power up the servo. Now connect motor with your esc, if brushless, then (A,B and C) wires, if brushed, then only (A and B) cables. Now connect battery to your esc and enjoy your kart!
Perfect thanks, I've made it like that and it works now. I just have to finish some details and wait the brass posts to arrive and I will enjoy it.
Hola e comprado todos los modelos del go kart y los links que pone en el manual ya mitad de ellos no existen y queria preguntarte tambien donde conseguiste la barra que une las ruedas de atras un saludo
Hello, rear axle is 2mm brass rod. If links doesn't work, seller stopped selling this item. Please search same items in other sellers. I'm using common hardware and electronics sold by many sellers.
Ojala hubiera un video del montaje del go kart y de las actualizaciones ya que el diseño es fenomenal ya si hicieras un video del montaje triunfarias un saludo.
Hello, I love my LiLcub, thanks for the great design. I just stumbled upon your Facebook page. Are you going to offer the LiLcub bush wheels and specifications on the Cults 3D site? Would love to add these on. Kind Regards
Hi... im using lw pla only sir.....my main questions is about the outer walls....its only 1 layer. So its too thin ...so if u can contact through any other way...it will be helpfull.
Hi i just bought your duck delta wing....the manual has no detail about nozzle . And i have ender 3 vs SE printer ...while is was trying to print a wing W_L_1 the wing has gaps in between..and the wall is soo thing..and its soo flexible...with your g code....plss contact me in your instagram page....i have texted u there...plss update me soon about the build instructions...thank you
Hello, model is designed to be printed with 0.4mm nozzle. Sounds like that you print it with regular pla, but you have to use pla lw. Please let me known more details to be able to find your problem, but if you follow user manual, you will be able to print it without any problems.
Hi! I was looking at your drift kart, what servo is used in it for the steering?
Hello, full metal servo KST X06.
Hi, im from Costa Rica, i looking for yhe seat for a go kart
Hello, seat is included in original Street Kart files - here is our official eshop: https://cactuscraft.info/b/W20e9
Hi, im from Costa Rica, i looking for yhe seat for a go kart
I messaged you on your website
What Controllers are compatible with RACING GOKART
I'm using Noble NB4 with Dasmikro micro RX, but it is possible to use any other TX with micro size RX which will fit.
Thank you for your response I look forward to your new commercial use items.
hola el modelo es LILCUB
hola
He descargado su modelo, los corto con el programa "Ultimaker cura", pero al intentar descargar los ficheros para cortarlos en el programa Ultimaker cura me dice que No hay modelo en el archivo, podría ayudarme, gracias
Hello, I'm using only Orca slicer, please use provided 3MF files with Orca slicer, otherwise you will have to find right settings with your slicer to achieve best results. There are so many slicers and lots of them works differently than others. It is not possible to provide files that will work with all of them properly.
Hello, I am Ton from the Netherlands and I have buy the files Duck from your site.
I have a Bambu P1S and I have a problem with the wing W_L_2 and W_R_2.
On the and/top of printing than the printer gives a error.
The extruder becomes nearly on the border of the printplate and gives the error.
I am not so good in understanding the printer.
I thinks that the extruder thinks that the frontcover hit the house.
Can you help my to chance the 2 files for my Bambu en set them in the middel diagonal/center of the printbed.
So I have more room on both sides/corners of the wing.
Wil you make them in Gcode.
On this picture you see the Te off the wing is to near the border.
https://ibb.co/kg0PRWX
Thank You
Ton
tonymoteros@hotmail.com
Hello Ton, please chceck your email. Thank you.
I have emailed you a few days ago you never responded but that's ok if you would like to sell me more files for commercial use just let me know I'm cash ready $100 or more for you.
I double checked my received emails and spam and I do not got any mail from you. Is this mail yours? I found older conversation, but not sure, if it was you or not - luigianasto@gmail.com
No its ok when you get more stuff for commercial use list it here and contact me here and ill pay whatever you want instantly.
Hello, I've downloaded your rc kart, there is any chance to have a TPU printed tyres?
One slick and one threaded set would be awesome, something like this https://www.thingiverse.com/thing:5982532
Thanks!
ultrafast 😳
Are you alive?
Hello I contacted you on IG but you never responded I'm looking for commercial use on the printed racer you have on IG. Ill pay more than last time for exclusive.
Hello, sorry, I'm pretty busy right now with new model. Please write me again your email here or on my IG, I get so many messages and I'm unable to find it right now.
I have messages you again on IG im ready to pay you
I did not receive any message on IG. Please contact me on my mail for further communication - kjkjj@seznam.cz
I emailed you 3 days ago
I double checked my received emails and spam and I do not got any mail from you. Is this mail yours? I found older conversation, but not sure, if it was you or not - luigianasto@gmail.com
Hi I purchased the Austin and have two questions. 1) The exhaust pipes for each side isn't in the details or any of the other files can you add this? 2) For the front grill, when bringing the step file in (using Simplify3d) it doesn't come in as a grid just a solid piece. Is the the way you intended or is it possible to add the STL of the grid so that this can be used in my build? Thank you for offering such a classic design.
Hello, thank you! 1) Please chceck file with name ''Details_classic_step'', exhaust should be there, you just need to glue both sides together. 2) Grill is solid model, grid is made by settings in your slicer - model with only 1 outer perimeter with 54% infill. Please download orca or prusa slicer and open 3MF file to see right settings and then just set same settings in simplify3D.
Thank you for the information. I missed seeing the file somehow (Details_classic_step). Also thank you for the slicer settings. We had to adjust the settings a bit more. For those with Simplify3d, in the Layer tab, use these settings: Top Solid Layer: 0 , Bottom Solid Layer: 0, Outline Perimeter Shells: 1. then go back to the main view and rotate the grill 45 degrees in the Z axis. This is necessary to get the same rectilinear pattern that prusa slicer creates.
What are you working on next? I'm ready to purchase more from you!
Nice to hear that! Already working on something new, but I need some more time to finish it.
Awesome keep me updated! I would also like to send a donation is possible.
You can follow my Instagram profile - printed_racers, to see news. I don't have any page for donation, but you can support me through my paypal - pawelkotva@seznam.cz, thank you!
I Contacted you on IG
Hi there, I bought your Austin 7 model and I have to congratulate you on the design. I do however appear to be missing a model for the brake drums in the download. Is this intentional?
Hello, you are right. I will update model files asap. Thank you for the info!
Thank you for the very prompt upload
Hi Cactus,
Could you provide stl files for your ME-163B model my Slicer fills them up because there just surfaces.
PLS.
Hello,
I'm not home at this moment. You can use online .step to .stl convertor. There are plenty of them. Let me known, if it works for you.
Best regards
Cactus Craft
Thanks for replying,
The issue isn't that it's an step. It's that some of the parts are just surfaces like the wings or the body. Could u make a version that is solid pls. Thanks