Requesting a refund. Not what i wanted. Kindly asking. Thanks
- 0 curtidas
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇺🇸 País do usuário: Estados Unidos
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Escreva a sua mensagem:
97 comentários
Hey! I just purchased the reverse bear trap file and I was wondering if there is a second version of the file with holes in the jaw pieces to put real screws - simillar to what you have on your Etsy
Thanks so much!
- 0 curtidas
Hello,
Can give some détail about the size, is it in part ? Thank u
- 0 curtidas
Hello! I just purchased your file for the reverse bear trap and your file does not work at all. Any advice? If not, I will need my money back
- 0 curtidas
What doesn't work ?
- 0 curtidas
I can't even download the file. at all. I've disabled ad blockers and everything
- 0 curtidas
Sometimes people have an issue downloading from cults, its nothing on my end. Try a different browser. The files been bought dozens of times and made dozens of times without a problem.
- 0 curtidas
I understand that. If I can't access the file in the end tho, I would like a refund.I believe you that it works
- 0 curtidas
I've downloaded designs from this site before (5 times) and this is my first issue. I would like a refund
- 0 curtidas
I am trying to print the reverse bear trap but it is to big, how can i cut it so i can print in multiple plates
- 0 curtidas
Hey there how do I connect the Scythe without carbon fiber rods
- 0 curtidas
Could you help me with measurements for 1708429/https://cults3d.com/en/3d-model/fashion/saw-inspired-reverse-bear-trap?
- 0 curtidas
Do you have the .stl file for the peashooter foam shooter from your instagram video?
- 0 curtidas
About the spongebob number 1 helmet. Can the #1 be printer seperate for different color and also does the hat spereate for its sepereate colors
- 0 curtidas
hello i have a question regarding the soul eater scythe, do you know about how long it takes to print and how many gram of filament it takes?
- 0 curtidas
Hey quick question, maybe it was posted on the listing of your breatrap print but I was just curious of what the size of the largest piece you need to print out. I was planning on doing this as a prop for my Halloween costume but I dont know if all the pieces will fit on my printer. Thanks!
- 0 curtidas
Do you offer custom designs for clients?
- 0 curtidas
Hello, I can ask for some information on: https://cults3d.com/en/3d-model/art/little-frights-babys-first-reverse-bear-trap-gag-prop/comments.
I have a Bambulab P1S, is it easy to print with this printer? And how many grams of filament does it take to print roughly?
Thanks
- 0 curtidas
Yes its pretty easy to print on a p1s. Honestly no clue because I print them in color so it takes a whole bunch of different amounts of each color
- 1 curtida
im doing the summoning key and the inner rings dont fit into the outer rings even though im printing with default settings of the file and chamging nothing of the stl any help?
- 0 curtidas
Never had an issue with those, you can try heating the parts up a little, sanding, or reprinting the inners at a slightly smaller scale
- 0 curtidas
Hey mate, I saw you used to have a Death Tambo up on thingiverse but its gone now. I was wondering if you still have the file and if i could purchase it from you?
- 0 curtidas
Hey there! I'm working on a print of your Smitty head, but it looks like the bubble containers are solid, and not hollow, and also can't be removed from the rings. Any setting suggestions youd recommend to separate them and hollow out the bubble containers?
- 0 curtidas
Ant seem to download this file. Don’t know what’s going on
- 0 curtidas
Its a zip file, shouldn't be an issue, a few people have downloaded it already without an issue
- 0 curtidas
Hello, do you know how big the head bracket on the saw trap is? I want to wear it on my head, so I need to know the measurements so I can scale it. Thanks
- 0 curtidas
I don't reccomend scaling anything as it will no longer fit any hardware. Its meant to be one size fits all and padded to size
- 0 curtidas
is there anything you can do if i had already purchased some files but i switched computers and tried to redownload them but it says i have to pay for them again ??
- 0 curtidas
Sign into the same account , go to your purchases and redownload them, Cults doesn't link to computers.
- 0 curtidas
First of all, I love this design. I plan to use this with an activity in a robotics math class. Would you be able to change the text on the front to the standard “FRONT TOWARD ENEMY.” I can provide more details if you would like.
- 0 curtidas
I downloaded with iPhone and can’t open the file. What should I do? Thanks.
- 0 curtidas
Hello, I would like to know if your elemental sticks are on a 1:1 scale?
- 0 curtidas
Hi Apropalypse,
I wanted to reach out regarding the Thundergun 3D model that I purchased — although it wasn't directly from you, it was actually from another seller selling your original model on Etsy, whom I bought from. After doing some research, I came to find that the original Thundergun originally came from you and saw that it's intended for personal use only, which I didn't see since the seller that I bought it from didn't have any warnings or labels regarding it.
That said, I've significantly modified the model — adding missing details, improving accuracy to the BO3-BO4 version, and planning to integrate electronics and a reload mechanism with other modelers.
I’m considering possibly selling physical prints of this enhanced version later in the future, but before doing anything, I wanted to check with you directly. Since the version I bought wasn’t from your official listing, I’m unsure whether this would be acceptable, and I don’t want to move forward until everything is clear.
Please let me know your thoughts, and thanks again for the incredible work on the original design.
Best regards,
Zaqueo Yanez
RoadwarriorPictures
- 0 curtidas
What’s your email? I can’t seem to find it.
- 0 curtidas
Hi,
I've been printing the baby's first bear trap and the tan head bracket 1 is not good, the holes do not allign with the rest of the mouth pieces
Can you send me a picture of the problem over email. Ive made a dozen or so and not had an issue Theapropalypse@gmail.com