Hallo, leider ist die Datei fehlerhaft. Mehrmals versucht die geteilte Datei der speerspitze zu drucken. Beide Teile brechen immer bei 10% ab. :( Ich drucke mit einem m5s pro (resin Drucker)
- 0 curtidas
👋 Olá, pessoal! Este tópico é público, então vamos mantê-lo agradável e respeitoso. Nada de anúncios, spam, nem nada desagradável!
🇺🇸 País do usuário: Estados Unidos
🌐 Idioma preferido do membro: Inglês. Você pode traduzir online usando o DeepL.
💡 Está se referindo a um modelo específico? Adicione o link, título ou número do modelo.
🖼️ Quer publicar fotos? Use um host gratuito como ImgBB e cole os links na mensagem.
✍️ Dicas de redação: Use o formato Markdown para estruturar seus textos e torná-los mais legíveis.
Escreva a sua mensagem:
17 comentários
Sorry to hear you are having issues. All the files check out. Not sure what may be the issue. I process a refund.
- 0 curtidas
Hi. Were you ever able to make the Andor detonator with a moving antenna and space for LEDs?
- 0 curtidas
Sorry I have not. There has not been any demand and at this point. With decreasing popularity the effort would not be worth the time to update the design.
- 0 curtidas
For the Hollow lightning bolt is there a file that doesn't have the cut out for the LED controller? Like it would be just one flat edge where the controller is supposed to be.
- 0 curtidas
Nevermind, Just saw the description
- 0 curtidas
Hello,
I see you've made models from the Percy Jackson show. Would you ever make the trident from the movie adaptation?
- 0 curtidas
I am working on the trident for the streaming series, but no plans for the movie version at this time.
- 0 curtidas
Hello I'm almost done printing backbiter but I forgot to download blade m and now its asking me to pay the eight dollars again just need just that file to finish it.
- 0 curtidas
Email me at 3Ddesign4hire@gmail.com with your order number and I will send you the files.
- 0 curtidas
Would you consider switching your backbiter model to a commercial attribution license? I have an Etsy shop where I sell printed models, and Riptide is my best seller, but this is the only model of backbiter I can find, and I can't design it myself
- 0 curtidas
Thanks for asking but currently that is not an option. I may establish a Patreon or something in the future.
- 0 curtidas
Hey there could you make tritons crown one piece? Need for a Barbie doll 12” let me know thanks :)
- 0 curtidas
I have created an STL file of the crown as a single piece and added it to the listing. You should be able to download it and now and scale as needed.
- 0 curtidas
Yess thankyou!! :)
- 0 curtidas
Hi im looking for a designer to make some Stls for me to use. I did have someone before but they cant do these specific models. Im looking to get the Marvel helmets, masks and such done so i can get them 3d printed. I have a word document with all reference pics and requirements for them. Would it be possible. Thanks
- 0 curtidas
Email the document as a PDF to 3Ddesign4hire@gmail.com and I'll take a look and let you know what I can do.
- 0 curtidas
Sent to ur email
- 0 curtidas
Thanks for downloading. If you have any questions, please get in touch.
- 0 curtidas
Do you have the Bunny Card kit as DXF ready for laser cutting?
- 0 curtidas
A DXF version of the Bunn Kit Card has been added to the listing.
- 0 curtidas
I purchased the Scarlet Scarab Sword but file is not downloading correctly. Said it should be larger than what download and get an access denied when it tries to open. Please contact me about it.
- 0 curtidas
Thanks for your purchase! I checked the listing and all the files are present in the folder. I have not had any issues with this in the past. I am wondering if it is related to the slow load times and maintenance of the site. Please try downloading a little bit later and if you still have issues let me know.
- 0 curtidas
I tried several times from different browsers and phone. File that downloads is only 44mb but invoice says it should be 125. Will try again tomorrow
- 0 curtidas
It is still doing the same thing downloads as 44MB file and gives access denied message
- 0 curtidas
Email me at 3Design4hire@gmail.com with your order number and I will send you the files.
- 0 curtidas
What are the dimensions for the metal rods used in the Scarlet Scarab sword. I understand they are 3.2mm in diameter. What are the lengths needed?
- 0 curtidas
1/8" diam x 2" or 3.2mm diameter x 50mm
- 0 curtidas
Hi, I'm cosplaying layla as the scarlet scarab, is it possible to print her swords on an ender 3 pro?
- 0 curtidas
Yes, the tallest split piece is 230mm and the ender 3 pro build height limit is 250mm.
- 0 curtidas
Hello,
I was just curious if you knew when the handle for the scarlet scarab sword would be done. I just finished printing everything and started to put it together but was hoping I could put the new handle design on it instead. Thank you
- 0 curtidas
Sorry for the delay, I have been busy working on some other projects. They are about finished up and I should be able to get back on this and add the texture to the handle by the weekend.
- 0 curtidas
Hello, sorry to bother you but was wondering if you have had time to uploaded the file?
- 0 curtidas
Thank you for your continued interest. Appling the texture to the complex curved surface has been more difficult than I expected. I have been researching for possible methods and will be working on completing the texture over the next couple of evenings so that I can post the final update.
- 0 curtidas
I just printed the handle and it’s beautiful. I can’t wait until you’re done with the whole thing! I realize you have access to the series but I’ve been re watching and going screenshot crazy. So many details. Great work and thank you for sharing your talent.
- 1 curtida
I plan on working on it this week, maybe done by next, depending on how detailed I get on the wing pattern and hieroglyphs.
- 1 curtida
How can I contact you about possibly commissioning you yo recreate her amulet on her chest, her belt and Tawerets head piece?
https://ibb.co/6F4VQ26
https://ibb.co/1KDBYqh
- 0 curtidas
I added my email to my profile which is 3ddesign4hire@gmail.com
- 0 curtidas
Hello, We are a company that produces filaments for 3D printers. I wanted to ask for a permission: we love your project and would like to buy it, 3D print using our filament and publish the photo after printing on our website.
- 0 curtidas
Thanks for your interest, can you please provide contact info for your company so that I can get in touch with you to discuss further.
- 0 curtidas
Hi , I’ve been printing the wavy dagger sword and it’s great but I can’t seem to get the wide handle to print , it keeps failing , do you have any ideas or tips to help me get it printed please ? Many thanks
I would recommend using tree supports for the internal features, turn on brim and increase the size to 10mm, and slow down your print speed to 50mm/s for a bed slinger or 70mm/s for a delta/core XY. Also use hairspray on the build surface for additional adhesion.
Hi again , thanks for your help , it worked perfect 👍