Caixa de botões da alavanca de velocidades G29

Update 10/15/2023: **

-Modified the screen attachment.

-Modified G29 Shifter connector hole.

Update 25/03/2023: **

-Added new body for our 3.5" HDMI Dash.

Here you can download a button box to use with your G29 shifters.

This button box can hold up to 28 inputs with the provided configuration, but you can set it up as you wish.

Parts:

Bolts and nuts:

M4:

• 4 x Button 25mm long

• 4 x Nuts

M6:

• 2 x 16mm long

Electronics:

• 1 x Blue Pill STM32 C8T6 - https://cutt.ly/hOSIzF6 or 1 x Arduino Pro Micro - https://cutt.ly/nI141Yt

• 4 x Rotary EC11 15mm long - https://cutt.ly/fOSYVtB or 4 x Bourns PEC11R-4215F-S0012 - https://cutt.ly/pGlU76L

• 8 x (Recommended) Metal 12mm normally open button - https://cutt.ly/II2cqy4 or 8 x Plastic 12mm normally open button - https://cutt.ly/lI2cimW

• 1 x Led metal switch - https://cutt.ly/lCsiE4Y

• 3 x momentary 2 way switch - https://cutt.ly/0OSY9Nr

• 1 x On-Off switch with cap - https://cutt.ly/ECsicgJ

• 1 x GX16 4 pin Connector - https://cutt.ly/iKbGXYY

You will also need to use a 3mm thick aluminum plate for holding all the electronics.

The .zip file includes all the 3mf/stl of the model, renders, .dxf and .step files for cnc services.

FOR PERSONAL USE ONLY - NON COMMERCIAL - NOT FOR RESALE

COPYRIGHT Canary Sim Wheel Designs - ALL RIGHTS RESERVED

You cannot sell the digital model, a derivative or adaptation of the model, nor can you sell prints of the model.

Recommended a good PLA, like PLA+ or PLA 850 or PLA 870

0.4 nozzle

0.2 layer height

60-100% infill

Supports not needed