Pular para o conteúdo
Propaganda

Campanário de escape de estilo Fronteris

Propaganda
Baixar Preço aberto
Compartilhar
Adicionar a
Make
?
Qualidade da criação: 5/5 (1 votar)
Avaliação dos membros quanto a adequação para impressão, utilidade, nível de detalhe, etc.
Licença
Usos
Formato do design 3D
22 arquivos (STL e ZIP) Fechar
  • pipe end hatch.stl 25.600011000000002 × 5.000053999999999 × 25.600019 mm
  • pipe end plate.stl 25.600022 × 5.000053999999999 × 25.600028000000002 mm
  • roof plain.stl 43.099998 × 43.099998 × 3.799979999999998 mm
  • roof port.stl 43.099998 × 43.099998 × 4.30000299999999 mm
  • supported.zip
    • pipe end hatch sup.stl
    • pipe end plate sup.stl
    • roof plain sup.stl
    • roof port sup.stl
    • tall pillar 2 pipes 1 sup.stl
    • tall pillar 2 pipes 2 sup.stl
    • tall pillar plain 1 sup.stl
    • tall pillar plain 2 sup.stl
    • tall pillar tall pipe sup.stl
    • tall pillar twin pipes sup.stl
    • tall wall light and vent sup.stl
    • tall wall light sup.stl
    • tall wall louvre and icon plaque sup.stl
    • tall wall louvre and panel sup.stl
    • tall wall louvre and vent sup.stl
    • tall wall louvre sup.stl
    • tall wall plain sup.stl
    • tall wall port light sup.stl
    • tall wall port louvre sup.stl
    • tall wall port plain sup.stl
    • tall wall vent sup.stl
  • tall pillar 2 pipes 1.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall pillar 2 pipes 2.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall pillar plain 1.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall pillar plain 2.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall pillar tall pipe.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall pillar twin pipes.stl 28.001428 × 18.383709000000003 × 70.400009 mm
  • tall wall light and vent.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall light.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall louvre and icon plaque.stl 34.0 × 10.700022 × 70.400002 mm
  • tall wall louvre and panel.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall louvre and vent.stl 34.0 × 10.700022 × 70.400002 mm
  • tall wall louvre.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall plain.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall port light.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall port louvre.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall port plain.stl 34.0 × 10.700000000000003 × 70.400002 mm
  • tall wall vent.stl 34.0 × 10.700000000000003 × 70.400002 mm

Saiba mais sobre os formatos
Data de publicação
Número do design 4091718
Autor do design sister_matic
sister_matic

sister_matic

Algum problema com este design? Relatar um problema.

Informações do arquivo para impressora 3D

Descrição do modelo 3D

This looks suspiciously like my Modular Utility Building, don't you think?

OK, yeah, I fancied having one that was full height - that is, the same height as a GW Sector Fronteris hab block, and therefore also the same height as a Fronteris style bunker. It is, very approximately, 60x60x70mm.

For my own use I thought I'd go all in on the vents; make it some sort of cooling tower type thing, with a simple style vaguely influenced by some belfry louvres. I've kept in some more basic walls too, if that's more your style (or you plan to embellish them yourself).

Compatibility

Style-wise, it obviously takes heavy cues from the Sector Fronteris hab units.

The pipe ports are the standard size expected on GW's 40k terrain - 25.6mm diameter.

The side pipe ports have a centre-line height of 14.5mm, which matches other terrain, e.g. Thermic Plasma Conduits.. Their outer face is 30.5mm from the centre point, so if you have two opposite each other they'll be 61mm apart, which should be a familiar size to those used to e.g. Sector Mechanicus components.

The roof is the same height as that of a Sector Fronteris hab unit, and the roof with a port should match the ports on those hab units too.

Assembly

You will need:
* 4x pillars
* 4x walls
* 1x roof
If you chose walls with ports, you'll also need
* 1+ pipe ends

Walls push into pillars from behind. I recommend putting the roof in unglued as you put together the rest, then gluing it in last.

Pillars can be mirrored for a bit more variety.

Pre-supports

The supported files here are the way I did them for myself, successfully. Is it the best? No. The walls and pillars are definitely over-supported, but I wasn't going to go back and change something that worked.

As you may see from the pictures, I did not print non-louvred walls. The supports have been applied in the same way, but I have not actually printed these specifically.

FAQ

  • What's with the extra holes on the pipe ports in the photos but not on the STLs? I have bizarre hopes of putting a lot of magnets everywhere. I'm not doing this in a way that I think makes sense to most people, so I didn't think it was worth sharing those. You can have the clean ones that actually look good by themselves!
Página traduzida por tradução automática. Ver a versão original.

Categorias

Todas as categorias › Jogo › RPG de mesa

Tags

Propaganda

Quer apoiar a Cults?

Gosta da Cults e quer nos ajudar a continuar esta aventura de forma independente? Nós somos uma pequena equipe de 4 pessoas, por isso é muito fácil nos apoiar para continuarmos em atividade e criarmos novidades para o futuro. Aqui estão 3 opções acessíveis a todos:

  • ANÚNCIOS: Desative o bloqueador de anúncios.
  • DOAÇÃO: Fazer uma doação via Ko-Fi Doar
  • BOCA A BOCA: Convide os seus amigos para acessar e descobrir a plataforma e os arquivos 3D incríveis compartilhados pela comunidade!

Compartilhar e baixar arquivos na Cults3D garante que os designs continuem nas mãos da comunidade maker, e não nas mãos de grandes empresas de impressão ou software 3D, donos das plataformas concorrentes, que exploram os designs para seus próprios interesses comerciais.

A Cults3D um site independente e de financiamento próprio que não precisa prestar contas para nenhum investidor ou marca. Quase toda a receita do site volta para os makers da plataforma. O conteúdo publicado no site atende apenas aos interesses dos próprios criadores, e não aos das marcas de impressoras 3D que também querem controlar o mercado de modelagem 3D.