Detalhes do motor Panther G Late Tipo A FM25-030

BASED ON 3D SCAN DATA!
Scale: 1/35 Highly quality scale model detail set. Digital 3D printable set (STL-Format)

FM25-030 Panther G Late Engine Details Type A

Panther Engine Deck details including engine cooling grids and radiators, includes
fully supported pieces with realistic cast textures; print in place mesh covers included!
Fits all common Panther G 1/35 Plastic Scale Model Kits

INCLUDED PIECES:

► Main Pieces

FM25-030 Panther G Late Engine Details Type A - EASY USE - Open Heater
FM25-030 Panther G Late Engine Details Type A - EASY USE - Partially Closed Heater

Panther Ausf.G Compartment Heater Type A IND.PIECES
Panther Ausf.G Compartment Heater Type A
Panther Ausf.G Late Cooling Grid IND.PIECES
Panther Ausf.G Late Cooling Grid Mesh Closed IND.PIECES
Panther Ausf.G Late Cooling Grid Mesh Open IND.PIECES
Panther Ausf.G Late Cooling Grid Mesh Partially Closed IND.PIECES
Panther Ausf.G Late Detail Parts IND.PIECES
Panther Ausf.G Late Radiator IND.PIECES
Panther G Cooling Grids Left - IND.PIECESIND.PIECES

Panther Ausf.G Antenna

► Single Pieces

2m Antenna Panther G
Air Intake Hole Screened Flange Panther G Mid-Late
Armor Cap for Air Intake Panther G
ArmoredMesh Closed
ArmoredMesh Open
ArmoredMesh SlightlyClosed
Cooling Grid Panther-G Early-Mid Mesh
Cooling Grid Panther-G Early-Mid no Mesh
Cooling Grid Panther-G Early-Mid w.Mesh
Cooling Grid Panther-G Late w.ArmoredMesh Closed
Cooling Grid Panther-G Late w.ArmoredMesh Open
Cooling Grid Panther-G Late w.ArmoredMesh SlightlyClosed
Engine Hatch Stop Panther G
Fighing Compartment Heater No Mesh
Fighing Compartment Heater Mesh Closed
Fighing Compartment Heater Mesh Partially Closed
Fighing Compartment Heater Mesh
Fighing Compartment Heater Type A Closed
Fighing Compartment Heater Type A Open
Fighing Compartment Heater Type A Partially Closed
Heater Covers Type A
Large Lifting Hook Engine Deck
Main Cooling Fan Mesh Panther G
Main Cooling Fan Panther G Type B No Mesh
Main Cooling Fan Panther G Type B Right
Small Lifting Hook Engine Deck
Panther Ausf.G 2m Antenna Base

All parts come as supported and unsupported versions

3D PRINT INFORMATION:

► Printing Specs

Layer Height: 0,040 (0,02-0,04)
Exposure Time: 2,6 sec
Bottom Exposure Time: 37 sec
Rest Time After Release: 1 sec
Rest Time After Retract: 1 sec
Anti-Aliasing: None

(for Mars 4 Ultra - results may varry on different printers)

► Working with the Parts

Use a sharp hobby blade for careful support removal.
Print layer 0.01-0.02mm for smaller parts, 0.035mm for large parts

In case of the resin being still soft and sticky, lay the part into the sunlight for a few hours.
(remove support structure beforehand! gently heat up the part with a hairdryer to make soften the supports)

Use a side cutter to detach the support structure from the model.(use a hairdryer to heat up the part gently
to prevent part from breaking!)
Bumps and remains of the support can easily be filed off. Gaps can be filled with putty.
Wash the piece with soap water.
The piece can be prepared with usual primer.

LICENSE INFORMATION:

You may only use the files provided for personal projects.
The distribution of the files is not permitted in any form f.e.: in digital or
3d printed form; the same applies to the sale of the files or the printed models,
or other forms of distribution f.e.: resin casting.

If you are interested in the conditions for a commercial license, feel free to contact me.

Copyright Faustus Models
by Tom Theunissen
© Faustus Models 2025

► Printing Specs

Layer Height: 0,040 (0,02-0,04)
Exposure Time: 2,6 sec
Bottom Exposure Time: 37 sec
Rest Time After Release: 1 sec
Rest Time After Retract: 1 sec
Anti-Aliasing: None

(for Mars 4 Ultra - results may varry on different printers)