Conjunto Flexi Holding Calico Cat (impressão no local)

[Update]
---2025/02/26---
・Mini Update "Custom Magnet Slot" is avalible!!
The 3mf file allows us to change the size of magnet hole. This makes it possible to accommodate other sizes of magnets that are not 8x3 magnets. Please refer to the included manual for details.
・"Authorized Seller Badge" is avalible!!
Three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge.

This model is Calico cat edition of the “Flexi Holding Cat Mark-2 Set". By editing the coloring area, you can customize the color scheme of the pattern as you like (you can even create a black cat with black beaks).

Compared to the free version, the new version is even cuter with added details of whiskers and paw pads. I have also added a keychain type model to the upgrade. In addition, this set also includes realistic cat eyes and toon eye models, giving you a total of 12 different models available!
All models have slots that can hold magnets. If you want to stick it on a refrigerator, pause 3D printing between 20-30 layers (layer height is 0.2mm) and put an 8x3 magnet in the slot (the magnet shown in the picture is 6x3).

This model includes the following digital content,
[Normal Eye]
- 01: STL - Regular
- 02: STL - Regular (Keychain)
- 03: STL - Long
- 04: STL - Long (Keychain)
- 05: 3mf (Bambu)- Cat Set
- 06: 3mf (Prusa)- Cat Set
[Cat Eye]
- 01: STL - Regular
- ...
- ...
- 06: 3mf (Prusa)- Cat Set
[Toon Eye]
- 01: STL - Regular
- ...
- ...
06: 3mf (Prusa)- Cat Set

05 is 3mf files for multi-color that are compatible with Bambu Studio, and 06 is files for Prusa Slicer. Because of the large number of models, single 3mf file contains Regular, Long, and various keychain type models (4 models in total). If you want to change the coloring, change the head and tail from “Object” and the body pattern from “Edge”.
The “5 Color” file comes with 3mf that allows you to create a complete tortoiseshell cat by manually replacing the filament when sculpting the nose, ears, and eyes. Manual replacement makes one AMS sufficient and can be reproduced with AMS Lite. If you want to make a complete tortoiseshell cat, please refer to the included recipe to give it a try.
*These 3mf files are only compatible with Bambu Lab, Prusa printers. Therefore, they are not compatible with other companies' dual-head printers.
---2025/01/13---
*Creality and Anycubic printers will also be able to multi-print starting in 2024. 3mf compatibility is described below.

Creality Print:
It is compatible with both Bambu and Prusa. To use it, import the 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are retained in both Bambu and Prusa 3mf. There is no need to re-set the filament color.

Anycubic Slicer:
Only Prusa is compatible. To use it, import 3mf and then change the printer model back to the one you are using to enable multi-printing.
The color settings are not retained, so you will need to reconfigure the filament in ACE Pro by referring to the file for Prusa. (You can view the color settings for Prusa from Anycubic Slicer.)

Print in Place with no supports. (Only stand needs to be assembled.) Please take pictures of your Flexi and share them with us!

💰Commercial Use💰
This model is granted "CULTS CU-ND - COMMERCIAL USE - NO DERIVATIVE" and may be used commercially within the terms of use.
Ex) Sell 3D printed Flexi on ec-site, flea markets, etc.
For more information, please see the terms and conditions below.
https://cults3d.com/en/licenses#cults_cu_nd
On June 10, 2025, Etsy changed its guidelines for 3D printed.
It is currently unclear whether this permits or prohibits licensed sales. I have released a document summarizing what I know below. If you are considering selling on Etsy, please check here.
https://drive.google.com/drive/folders/1ESd-dIKBx1fHmnwlSad1MvqzzzYPqI0f?usp=sharing
Also, when selling, please make sure that the platform and market guidelines are appropriate.
---2025/02/26---
Authorized Seller badges are now available in three designs: Calico Cat, Mini Hammerhead, and Mini Leaf Dragon. Please choose your favorite badge. Please show badge or indicate credit when you use the service.
---2025/04/02---
The Terms of Use have been established in accordance with the classification of commercial model licenses. This model falls under the “AC-Model (Anyone Commercial use model)” in the Terms of Use. For details, please refer to the following Terms of Use.
https://drive.google.com/drive/folders/18Ig2JGqE_PmNcH5C9JYHZDpAwyYAiPJO?usp=sharing
⚠Attention⚠
Only this model can be used for commercial purposes; the free version of the model cannot be used for commercial purposes.
(Because free version is already licensed under the "CC BY-NC-ND 4.0" or "CC BY-NC-SA 4.0" non-commercial use license. Also, selling a free version that cannot be used for commercial purposes may cause customers to misunderstand that you are selling it without permission.)

💷Support💷
If you would like to chip in or support us, we would be happy to purchase a paid model for sale on Cults.
💷Cults↓
https://cults3d.com/en/users/3dflexseeds/creations

⚠Warning⚠
Be careful in environments with young children and pets!
This model contains small parts. If not properly stored in an environment with young children or pets, it may lead to accidents such as accidental ingestion or injury. If infants or pets are present, please take appropriate measures depending on the situation, such as refraining from 3D printing or storing in an appropriate place.

Do not apply strong force!
Applying strong force to a 3D printed model or throwing it may damage the model and lead to accidents such as injuries. In addition, debris from damage to the model may be accidentally ingested by infants or pets. If the model is damaged, dispose of it immediately.

Store them in an appropriate place.
After 3D printing, store the model in an appropriate place out of reach of young children and pets. Proper adherence to the precautions will ensure safe use of the model.

📓Notation based on the Specified Commercial Transaction Act📓
I have published a detailed document on Google Drive, see document below.
https://drive.google.com/file/d/1ax98i6JwM11e-y5TzkYbt14AL1D0XqU-/view?usp=sharing

🖨Configuração da impressão🧵

Preenchimento:15-20%

Material do filamento: PLA

[Altura da camada]

Altura da camada: 0,2mm

Altura inicial da camada: 0,2 mm

[Emenda]

Posição da costura: Alinhada

[Paredes]

Laços de parede: 3

[Velocidade inicial do assentador]

Camada inicial: 30mm/s

[Velocidade da outra camada]

Parede exterior: 30mm/s

Velocidade da saliência: 0, 0, 10, 10, 10mm/s [10%, 25%, 50%, 75%, 100%]

Ponte: 30mm/s

[Aceleração]

Parede exterior: 2000mm/s^2

[Suporte]

Ativar suporte: nenhum

[Jangada]

Camadas de jangada: 0 camadas (nenhuma)

[Adesão à cama]

Tipo de aba: Sem aba

[Torre Principal]

Costelas internas: nenhuma

Largura: 15mm

Largura da aba: 0mm (nenhuma)

Folga de enchimento: 100%.

Parede de nervuras: nenhuma