Pular para o conteúdo
Propaganda

2012 Formula Racer - 1:10 Scale

IMG_2127_square.jpg 2012 Formula Racer - 1:10 Scale
IMG_2127.jpg 2012 Formula Racer - 1:10 Scale
IMG_2119.jpg 2012 Formula Racer - 1:10 Scale
IMG_2120.jpg 2012 Formula Racer - 1:10 Scale
IMG_2121.jpg 2012 Formula Racer - 1:10 Scale
IMG_2122.jpg 2012 Formula Racer - 1:10 Scale
IMG_2123.jpg 2012 Formula Racer - 1:10 Scale
IMG_2125.jpg 2012 Formula Racer - 1:10 Scale
IMG_2127_square.jpg 2012 Formula Racer - 1:10 Scale
IMG_2127.jpg 2012 Formula Racer - 1:10 Scale
IMG_2119.jpg 2012 Formula Racer - 1:10 Scale
IMG_2120.jpg 2012 Formula Racer - 1:10 Scale
IMG_2121.jpg 2012 Formula Racer - 1:10 Scale
IMG_2122.jpg 2012 Formula Racer - 1:10 Scale
IMG_2123.jpg 2012 Formula Racer - 1:10 Scale
IMG_2125.jpg 2012 Formula Racer - 1:10 Scale
Propaganda
Faça uma oferta
Compartilhar
Adicionar a
Make
?
Qualidade da criação: 0/5 (0 votos)
Avaliação dos membros quanto a adequação para impressão, utilidade, nível de detalhe, etc.
Licença
Usos
Formato do design 3D
1 arquivo (ZIP) Fechar
  • 2012 Formula Racer - By STLLabs.zip
    • 04 - Main Body/Body - Unsplit.stl
    • 04 - Main Body/Body front.stl
    • 04 - Main Body/Body rear.stl
    • 04 - Main Body/Headrest.stl
    • 04 - Main Body/Mirror L.stl
    • 04 - Main Body/Mirror R.stl
    • 04 - Main Body/Nose underwings.stl
    • 04 - Main Body/Rear crash structure.stl
    • 04 - Main Body/Seat.stl
    • 04 - Main Body/Side cam.stl
    • 04 - Main Body/Small connector pin.stl
    • 04 - Main Body/Steering wheel back.stl
    • 04 - Main Body/Steering wheel front.stl
    • 04 - Main Body/T-cam.stl
    • 05 - Front suspension/3mm connector pin.stl
    • 05 - Front suspension/Front bottom wishbone L.stl
    • 05 - Front suspension/Front bottom wishbone R.stl
    • 05 - Front suspension/Front push-rod L.stl
    • 05 - Front suspension/Front push-rod R.stl
    • 05 - Front suspension/Front top wishbone L.stl
    • 05 - Front suspension/Front top wishbone R.stl
    • 05 - Front suspension/Front wheelhub front L.stl
    • 05 - Front suspension/Front wheelhub front R.stl
    • 05 - Front suspension/Front wheelhub rear L.stl
    • 05 - Front suspension/Front wheelhub rear R.stl
    • 05 - Front suspension/Steering rod L.stl
    • 05 - Front suspension/Steering rod R.stl
    • 06 - Rear suspension/3mm connector pin.stl
    • 06 - Rear suspension/Driveshaft L.stl
    • 06 - Rear suspension/Driveshaft R.stl
    • 06 - Rear suspension/Pull-rod L.stl
    • 06 - Rear suspension/Pull-rod R.stl
    • 06 - Rear suspension/Rear wheelhub front L.stl
    • 06 - Rear suspension/Rear wheelhub front R.stl
    • 06 - Rear suspension/Rear wheelhub rear L.stl
    • 06 - Rear suspension/Rear wheelhub rear R.stl
    • 06 - Rear suspension/Rear wishbone bottom L.stl
    • 06 - Rear suspension/Rear wishbone bottom R.stl
    • 06 - Rear suspension/Rear wishbone top L.stl
    • 06 - Rear suspension/Rear wishbone top R.stl
    • 07 - Rear wing/Exhaust.stl
    • 07 - Rear wing/Rear wing.stl
    • 08 - Wheels/Bearing replacement.stl
    • 08 - Wheels/Front rim.stl
    • 08 - Wheels/Front tyre.stl
    • 08 - Wheels/Rear rim.stl
    • 08 - Wheels/Rear tyre.stl
    • 2012 Formula Racer - Assembly Guide.pdf
    • 2012 Formula Racer - BOM.pdf
    • Settings, filament, tips, tricks and a gift!.pdf
    • 00 - Presliced parts (PrusaSlicer)/02 - Frontwing.3mf
    • 00 - Presliced parts (PrusaSlicer)/03 - Floor.3mf
    • 00 - Presliced parts (PrusaSlicer)/04 - Main Body.3mf
    • 00 - Presliced parts (PrusaSlicer)/05 - Front suspension.3mf
    • 00 - Presliced parts (PrusaSlicer)/06 - Rear suspension.3mf
    • 00 - Presliced parts (PrusaSlicer)/07 - Rear wing.3mf
    • 00 - Presliced parts (PrusaSlicer)/08 - Wheels.3mf
    • 00 - Presliced parts (PrusaSlicer)/09 - Varioshore Wheels.3mf
    • 01 - Presliced parts (BambuStudio)/02 - Frontwing.3mf
    • 01 - Presliced parts (BambuStudio)/03 - Floor.3mf
    • 01 - Presliced parts (BambuStudio)/04 - Main Body.3mf
    • 01 - Presliced parts (BambuStudio)/05 - Front suspension.3mf
    • 01 - Presliced parts (BambuStudio)/06 - Rear suspension.3mf
    • 01 - Presliced parts (BambuStudio)/07 - Rear wing.3mf
    • 01 - Presliced parts (BambuStudio)/08 - Wheels.3mf
    • 01 - Presliced parts (BambuStudio)/09 - Varioshore Wheels.3mf
    • 02 - Frontwing/Front wing.stl
    • 02 - Frontwing/Nose camera.stl
    • 02 - Frontwing/Nose cone.stl
    • 03 - Floor/Big connector pin.stl
    • 03 - Floor/Floor - Unsplit.stl
    • 03 - Floor/Floor front.stl
    • 03 - Floor/Floor rear.stl

Saiba mais sobre os formatos
Data de publicação
Número do design 4774616
Autor do design STLLabs
STLLabs

STLLabs

Conta certificada
Algum problema com este design? Relatar um problema.

Informações do arquivo para impressora 3D

Descrição do modelo 3D

LICENSE: THIS MODEL IS FOR PERSONAL, NON-COMMERCIAL USE ONLY!

THE 2012 FORMULA RACER is a large 1:10 scale display model inspired by iconic early 2000s formula1 style racecars.

SIZE / WEIGHT:
- Total assembly: Roughly 51 x 18 cm
- Filament: I used roughly 0.5 kg of filament using 5% infill. This is dependent on your settings!

MAKEABLE FOR EVERYONE:
- Minimum printbed size: 145 x 165 x 202 mm
- Includes full unsplit body and floor to split yourself
- Includes pre-sliced 3MF-files
- Includes an assembly guide
- Includes tips & tricks

FEATURES:
- Removable headrest
- Rotating wheels
- Easily scaleable
- Assisted assembly with dovetails, dowels and recesses
- Also includes a VARIOSHORE-TPU DISCOUNT

RECOMMENDED SETTINGS:
- Resolution: 0.2 mm layerheight
- Infill: 5-10%
- Supports: Yes, I highly recommend using organic supports!
- Brim: Advised against warping, not mandatory!

NOTES:
Assembly: The model contains an assembly guide, please follow this guide with care.

Fitment: Fit check any parts before permanently attaching them! Some parts may need sanding or filing!

SUPPORT:
Incase of any problems or questions please contact us via a private message on here, or over on Instagram or via email: staff.stllabs@gmail.com

Feel free to share your makes with us on Instagram and tag us using @stllabs

(This model is made by STL Labs and may not be sold or shared by unauthorized third parties)

Categorias

Todas as categorias › Arte › Digitalizações & réplicas

Metatags

Tags

Propaganda

Quer apoiar a Cults?

Gosta da Cults e quer nos ajudar a continuar esta aventura de forma independente? Nós somos uma pequena equipe de 4 pessoas, por isso é muito fácil nos apoiar para continuarmos em atividade e criarmos novidades para o futuro. Aqui estão 3 opções acessíveis a todos:

  • ANÚNCIOS: Desative o bloqueador de anúncios.
  • DOAÇÃO: Fazer uma doação via Ko-Fi Doar
  • BOCA A BOCA: Convide os seus amigos para acessar e descobrir a plataforma e os arquivos 3D incríveis compartilhados pela comunidade!

Compartilhar e baixar arquivos na Cults3D garante que os designs continuem nas mãos da comunidade maker, e não nas mãos de grandes empresas de impressão ou software 3D, donos das plataformas concorrentes, que exploram os designs para seus próprios interesses comerciais.

A Cults3D um site independente e de financiamento próprio que não precisa prestar contas para nenhum investidor ou marca. Quase toda a receita do site volta para os makers da plataforma. O conteúdo publicado no site atende apenas aos interesses dos próprios criadores, e não aos das marcas de impressoras 3D que também querem controlar o mercado de modelagem 3D.