47件のコメント

if you are refering to the mg gunner free one it wasnt made to a scale as was one of my early designs

Please dont try to use my page to premote your own designs :(

Hi have you changed anything on the model as i have seen many prints of this with no issues please explain more ie if made any changes to size or hollowing ect what software you are using

i have just downloaded the model to double check i opened with 3d builder with no issues at all so if you are having issues please reply to my first message and i will try help the best i can

also if you have hollowed the model you will need to add drain holes

Hi ill dl chitubox and have a look see if anything stands out but looking at your pic its seems you need to add drain holes which may fix the issue but tbh i have seen many prints of this with no issues reported im guessing you are printing tabletop size so maybe give it a go because i am wondering if its detecting the gaps between the cloths and her body which should not be an issue because ehr cloths are pretty thick but ill get back to you as soon as i got chitbox and had a look

i cant seem to replicate what you are showing https://ibb.co/Dj5dZTy

id suggest do a print as solid model and see how it goes if it shows issues on the print let me know and ill try rework the model and do a v2 upload

Hi! Thanks for replying! No, I just upload her on chitubox and I get the message that there are closed cavities, like the picture I sent. Drain holes don't work because it looks like there are internal.

i did same on chitubox but got no message i think best thing is as it not going to be using much resin is try a print and let me know how it goes if you dont have successfull print i will try to modify the design best i can to help you get successfull print but its a little hard as i cant see any issues with either my slicer or the chitubox i installed as can be seen on the image link i sent also i doubled checked on 3d builder and it also shows no isssues and i know otehrs have also printed fine as seen posts with printed model

Oh, ok! Then I will try to print her anyway and I'll let you know how it goes. Thank you so much!

Yes please and if it does fail please send pics so then i have some idea better as to why your slicer is showing some sort of issue sorry about this but like i say i have had well over 600 downloads of this and this is first report of an issue but i will always try to solve any issues with my designs

Could you also tell me version of chitubox you using maybe i dl older version

How did it go ?

Hi its not split its designed for resin printing in one

Hi you can scale it up or down by small amount but to far and start to either loose details or parts dont print i didnt actualy make to a secific scale only time i make any of my designs to specific scale is my 1:35th stuff i can download the model and show it you in s3d if that will help

dang i though i could add pics here

https://ibb.co/wNkGPJf4

not sure if that help ya could not find way to add image here so made online share

Hi yes I do commercial licence but only for selling prints not for sellingmy design files please send me name of model or models you would like to print and sell and icon give you a price

I have actually been contacted a few times asking about a licence to sell so I am thinking of adding separate listing with licence included price

Great, like a price for the feldgendarmierie witch sig, the german tank commander, mel Gibson AND the german Panzer grenadier al bustos please

Hi I'm not sure what the feldgendarmierie witch sig and the German panzergrenadier

The others are 20.00 each plus cost of model
Stl files each

For this you can sell as many printed models as want

Hope this helps

Hello sorry for the delay in answer i have some medical problems, but now i like to start buying the PANZER commander bust with the licence, witch aré the process to pay you the 20.0

Hi give me a little time i will make an advert for the model with new price which will include resell licence for the printed model for resell please note this does not allow resell of my design please send me link to exact model so there is no miss understandings thanks

Sorry for the late response, I had some health problems and adding the holiday season I couldn't pay attention to the notifications, but I'm already very well and ready to buy the first license This would be the one I'm interested in to start with.

https://cults3d.com/en/3d-model/various/tank-commander

No problem I will get a new sale up with cost of licence and cost of model included and let you know when it's active thanks but please rem it only covers the selling of the physical print not for reselling the actual design

Great thank you very much, i wait for the link, AND yes i only sell printed copies

is active now friend

Hello, now im interested in this one:
https://cults3d.com/en/3d-model/various/german-soldier-and-dog-bust

Can you please make a licence listing please

Cheers

Off top of my head I can't honestly remember m8 download it is not a big file and yes you will need to add your own supports I'm your slicer

I am not sure what item you are asking me about ? Please be more specific

I don't allow selling of my designs at all

However I allow selling of printed model but you must pay a one off payment for each design you wish to sell prints off

Sorry I mentioned to say Daryl printed model and how much would I have to pay

sorry for late reply which one as there is 2

Hi it was for the daryl diaroma one

Thanks for letting me know

hi i will check for you

hi i have checked previously it has downloaded fine with no issues reported but as a double check i tried to download myself and can confirm it downloads just fine i can suggest 1. check you have enougth space to download to 2. try downloading using a different browser please get back to me if still have issues thanks

please let me know if still have issues or if you download ok now thanks

Hi it can be scaled up and down a bit either way just gota be carefully if go to far will either loose details or not print right

Thanks for letting me know ill contact them

hi thanks again i got them to taken it down

Great news. Hopefully they stop violating license agreements for other 3D modelers too

Hi generally speaking i dont do models to scale unless stated 1:35 as thats the normal scale i use for figures but for busts it varies tbh i can open the file and send you total hight of the model if that helps

are you refering to the german or the russian tank commander ?

Hello sorry no i dont i just make models when i feel like it and add here if i think others may like so it keeps it as a hobby thanks

Hi sorry i dont have cut version as i made it for resin printing

hi m8 sadly most of my free models i no longer have the zbrush files for them :( i only keep for so long sorry

sadly no m8 i just do this as a hobby if i make something i think others will like i put it on my cults page

hi i first posted the model with base and another member asked if could be added without a base so i upload without the base as well so to answere your question yes the model comes with base and also supplied is the alien and the baby without any base

Thank you

I PURCHASED THE FILE. IS IT POSSIBLE TO HAVE THE BASE FILE?

The base file should be in with rest of files m8 ill double check and get back to you

i checked and the alien girl is complete with base or do you mean you would like the base seperate ? if yes give me some time i not sure if i kept the design files

yes, I would like to have the separate base. I have a Saturn and I wanted to try to cut both the girl and the base to be able to print the larger model. This model is really beautiful. But I don't want to give you any problems. If it's possible, fine, otherwise thank you all the same

It was original a solid model and someone asked for those bits sepperate so i added for them the alien and baby but if i can find my design files ill up the base for you as well

thank you very much

Hi you are lucky i have the base took some finding lol i will upload shortly but please note the following it is not to scale of model so you will need to rescale it to fit and lastly it is not cut for alien and baby to fit onto so unless you boolian it or dremel out after printed the baby and alien will not sit right on the base sorry i cant help more

Hi i have uploaded the base there is a small and a larger version but not to scale of original model if at some point i get some spare time i will split and cut and key the whole model thanks

PERFECT!YOU WERE GREAT!

hi the cowboy 3 is a free model m8 no need buy :) and yes i used supports

Thank you!!

i didnt actually make it a scale tbh but you should be able to go up or down in size a little however going to small you may loose some details

the hight of the bust with no base ect just the torso is approx 78.19mm

Thanks.

Hi sorry i dont use blender

i send you email friend please read carefully and reply best you can with as much info as you can thanks

Merci et pour les pneus aussi, cordialement.

how mean the tires are have issues ? can you please list for me the parts you have issues with otherwise i am going to have to keep going back and forth is not as easy as to just fill things in hope you understand thanks

is fine i think i can read between the lines i am reworking the model to make better for people who wish to print smaller i am make jacket closer to mans body and also make jacket thicker as this is the only place i can see that would be an issue for when print at the scale you printing at however as i dont still have my original working files the jacket has slite diff imaes on back but i have added extra details stitches ect for now i am working on just the full model and i will also do a v2 for the split model i will get this uploaded asap thanks