Can you tell me how many MBs the .stl file is for the Jiraiya headband?
- 「いいね」数：0
👋 みなさん、こんにちはここは公開スレッドですので、お互いに親切に敬意を払って交流しましょう。広告、スパム、不快な投稿は禁止です！
🇬🇪ユーザーの国：グルジア
🌐 メンバーの優先言語：英語。 DeepL でオンライン翻訳を利用できます。
💡 特定のモデルについて話している場合は、リンク、タイトル、またはモデル番号を追加してください。
🖼️ 写真を投稿したい場合は、ImgBBなどの無料ホスティングサービスを利用して、メッセージ内にリンクを貼り付けてください。
✍️ 書き方のヒント：Markdown 形式を使って、文章を構造化し読みやすくしましょう。
メッセージを入力してください：
46件のコメント
May I please know the size for the ‘GOGO YUBARI WEAPON METEOR HAMMER (KILL BILL)’.
Thank you!
- 「いいね」数：0
Hello! This model has a cross-section of 12 centimeters. However, you can always increase or decrease the size of the model in the slicer before printing.
- 「いいね」数：0
bi arkadaşımın çocukları için 2 tane ürün bakıyorum. 1.erkek çocuk lösemi hastası erkek sonic 2.kız çocuk için.kız çocuk çok şükür bir hastalığı yok.
- 「いいね」数：0
Hello! I'm sorry, but I don't understand what you mean. Could you please ask your question in English?
- 「いいね」数：0
bi arkadaşımın çocukları için 2 tane ürün bakıyorum. 1.erkek çocuk lösemi hastası erkek sonic 2.kız çocuk için.kız çocuk çok şükür bir hastalığı yok.
- 「いいね」数：0
bonjour je voulais te prendre le casque de tomb raider mais j'ai un doute pour l'impression comment tu les prévu ?
- 「いいね」数：0
Hello! I use a slicer and cut the model to the sizes I need, for example, I cut off the Horns and cut the mask in half
- 「いいね」数：0
bonjour je voulais te prendre le casque de tomb raider mais j'ai un doute pour l'impression comment tu les prévu ?
- 「いいね」数：0
Hola necesito saber si haces reales esas mascaras para hacerte un pedido de mascaras
- 「いいね」数：0
Hello! Unfortunately I do not work with international transportation
- 「いいね」数：0
hello, When purchasing any of your models, is the commercial license included to sell the 3D prints? (not the digital file)
- 「いいね」数：0
Hello! Yes, you can use printed models
- 「いいね」数：0
Hello i was wondering if KUNIMITSU MASK TEKKEN 7 (KITSUNE MASK) is suitable for cosplay and what is an avarage head size to print it?
- 「いいね」数：0
Greetings! Yes, the Mask is intended for cosplay. Before printing, you can set the mask size you need
- 「いいね」数：0
Hello, can I get a discount on the purchase of files for "Obito's Mask"? In turn, I will post your logo/brand name and recommend it to friends and publicize the cosplay
- 「いいね」数：0
Greetings! You can use this coupon during the week
UCHIHA10
- 「いいね」数：1
can you contact me on whattapp or telegram please?
- 「いいね」数：0
Hello author, after purchasing Dottore's accessory package, I found that the accessory model did not separate the transparent gem part from the opaque part, which is very unfriendly to printing. And there are a lot of surfaces and residues in all the depressions and ravines. My software crashed many times and I couldn't make any more edits. I hope that we can negotiate a refund for this purchase. Iwish you can produce better quality models and good luck with your work！
- 「いいね」数：0
Greetings! I'm sorry that you were not satisfied with the quality of the models, but all the parts are monolithic, their entire list was in the images. Regarding the printing of products, all parts are absolutely suitable for printing. I personally printed this pack and used all these parts for the Dottore cosplay and I didn’t have any problems when printing
- 「いいね」数：0
I use sla printer.When I was slicing in software, scaling was difficult because of the many surfaces. When I tried to separate the gemstones by myself, I found that there were still many tiny solid models left in many of the ravine areas, like the remains of carvings. The process was very difficult. It seems that the author used the sculpting method instead of point, line and surface to build the model when modeling.
- 「いいね」数：0
This won't print. I've tried twice now. Wasting about 14 hours. The right hand does not go. And Ive added supports and it still failed. Any way you can look into this.
- 「いいね」数：0
This won't print. I've tried twice now. Wasting about 14 hours. The right hand does not go. And Ive added supports and it still failed. Any way you can look into this.
- 「いいね」数：0
one entire piece, with errors. trash waste of money so regret this purchase
- 「いいね」数：0
Greetings! What exactly are you unhappy with and what errors did you encounter?
- 「いいね」数：0
Hello, there is a small problem with the 3d file of the scope mask for Deidara, the print don't work because the quality of the file is not enough good and there it need to make changes in some places. (photos below places to modify) Can you maybe help me with that modification ?
https://api.xometry.de/file/e4f5264b-7cd0-462e-87df-5fd2c91fc607
https://api.xometry.de/file/95a64d56-674a-44bb-af73-6588f1d8a622
- 「いいね」数：0
Hello! I would like to know the estimated printing time of the GENSHIN IMPACT IL DOTTORE COSPLAY SET files. Since I want to estimate how long it will take to print before I can purchase the file. Can you help me with this information?
- 「いいね」数：0
this files is not a stl
- 「いいね」数：0
Greetings! The file is in the archive, open it with the WINRAR program and extract the file to the location you need
- 「いいね」数：0
Здравствуйте, вы не могли бы выложить файл нового глаза бога Кейи на бусти?
- 「いいね」数：0
Hola el modelo de Knuckles se imprime completo o viene separado por partes?
- 「いいね」数：0
Greetings, the model is one-piece, if necessary, you can cut it yourself using a slicer
- 「いいね」数：0
Hello, the Sonic model's base is a tad bit too large at its default size for my printer. Is there any way I could get the base and sonic as two separate files?
This is the model I'm talking about https://cults3d.com/en/3d-model/game/sonic-appunk316
- 「いいね」数：0
Greetings, you can cut the model yourself as you need, for this you can use the program (netfabb), or its analogues. It is also possible to cut the model directly in the slicer, for example, I use (Craftweare)
- 「いいね」数：1
Thanks for the suggestion. I decided to go the down the difficult route of cutting it where the seam wouldn't be visible, but I'm happy with it
- 「いいね」数：0
Hello, i just bought your Kitsune mask. Do you have any suggestions for a noob on how to print? (Anker M5)
Tried printing with supports and still didn't stick, but maybe I'm just a noob. Lol
- 「いいね」数：0
Greetings, if it was not possible to print with the support in one piece, cut the mask horizontally into two equal parts in the slicer, put the cut places on the table, put the supports. I use "Craftweare Slicer" for printing
- 「いいね」数：1
Hello, do you sell this version of kunimitsu mask?
https://twitter.com/Yellow_Motion/status/1309859326727786496/photo/1
unfortunately the site is broken and i cannot load all preview images of your model
- 「いいね」数：0
hello your superman statue with him kneeling how tall is it. in inches please
- 「いいね」数：0
Hi. Do you offer this also with the red and black as in the pictures?