51件のコメント

All my creations are designed for 1/24 scale, only a few parts need to be printed at 10%

non l'impression sur mon logiciel il me sort a taille réelle a 82%

Je viens de vérifier et sur chitubox ça fonctionne pourtant. 10.62mm de large et 4,52mm de haut

sur anycubic photon sa me sort en 81,999% pour le X,Y,Z

Si vous mettez 10% logiquement vous devriez arriver au même résultat que moi je pense

il a faut je met sur le X a 2% pour donner la grandeur exacte mais la faut je regarde mes support de l'impression quand j'ai voulu demouler des support les boucle on tous cassé

Utilisez des supports plus fin et normalement 2 voir 3 support suffisent, je n'ai pas eu de soucis avec mon elegoo saturn

j'essaie de trouver le bon model de support je débute avec les imprimante resine

Donnez votre adresse mail je vais vous envoyez une capture d'écran avec mes réglages des supports

mick_2346@live.ca

envoyer

ok

Pedal box, trmin, exhaust, frein a main, compteur

Yes, but it's $119,000 😅

So if i scalate (1:24) to 1:1, i get an operative and funtional engine that works in real life?

No, it's a model for resin printing.

Yeah i know, but if i do it in the proper alloy?

It is indicated that some parts must be reduced to 10% instead of 100% to be at 1/24 scale. Then, multiply by 2.4 to be at 1/10 scale.

Hello, thank you very much.

No, sorry.

Hi, yes, just multiply by 2.4

Yes

Thanks

Yes, there are photos of my assembly provided and if you have any questions, I am here.

where is the photo inside the file ?

Build.zip

Come in Messenger

Do you want the one in the kit? Or I have this one if you want
https://cults3d.com/en/3d-model/various/header-f20c-tubo

Yes, I want the one in the kit, not this one

https://cults3d.com/en/3d-model/various/engine-f20c-turbo-1-24
Can you add the full race turbo manifold found here separately?

I'll do it for you tomorrow, I'm back from my vacation

https://cults3d.com/en/3d-model/various/header-full-race-f20c-with-turbo-hks

Thank you very much, I will use it in my 1/18 autoart s2000 project

If you know how to send me the photos on Instagram Zero_Factory_scaled_works

Thank you very much for your feedback, I will look into it this week.

For the price you charge you would think that there would be pictures or a link to something that actually goes somewhere

I thought the link worked, you are the first after several years to complain...

I added a zip file with the photos with the design on cults

there is a link to my facebook page with the build in the description, just cut the top of the wings off

Thank you for your purchase, do you have a Saturn or a Mars and which parts are too big?

I sent u a pm on facebook

to install it you have to cut out a lot of parts whether for the r33 or r34 (see the Facebook link) personally I have not mounted it on an r33 but my friend krisbizzle use it for his r33

no, unfortunately I don't have time at the moment. just sand lightly (as always before painting) or use a textured paint

I will reimburse you

108558813

https://cults3d.com/en/3d-model/various/wind-deflector-and-rear-spoiler-altezza-lexus-is-fujimi

It is refunded but in the future contact me before or make sure to read the description 😉 thanks

Thank you, you are right, I know it is for Tamiya, but it generally fits 1/18 models as well, but unfortunately there were many differences in these parts, for example, I bought the trunk spoiler from you, it fit, thank you again.

I printed it vertically without problems, if that doesn't work just change the thickness in chitubox

They are included with the engine compartment that you bought from me but as with all my parts it is for private and non-commercial use

No sorry it is indicated in the description and on the copyright it is for private and non-commercial use

hello, it's done 😉

Thank you!

I thank you very much, let me thank you by offering you what you want for free

choose and tell me

no I only have the rear lights and exhaust for the s2000, I made the refund 😉