Foldable RC Car Stand

The foldable RC Car Stand!

Highlights:

• For 1/10-scale RC on-road cars and buggies (Stand Height: 50mm)
• Folds flat for easy storage and transport
• Stylish and practical design
• TPU pads protect your chassis from scratches
• TPU foot pads keep surfaces safe
• No printing supports needed

Intended for use with RC cars only.

Not a toy. Not intended for children.
Printed parts may include small or sharp components.

Check out all my other RC accessories here:
https://cults3d.com/de/drucklisten/dreamformdesign/rc-accessories

Disclaimer
Downloading, slicing, printing, and any use of the file(s) or printed object(s) are entirely at the user's own risk.
No warranty is given for accuracy, safety, durability or suitability for any specific purpose. The provider (creator of this design) accepts no liability for any damage, malfunction, or injury resulting from the use, modification, or printing of this/these file(s) and any printed object(s). Do not use for load-bearing, structural, or safety-critical applications. For private use only (as defined by the CULTS PU License). By downloading this file, you agree to these terms. See the included PDF disclaimer in the download files for full details.

Recommended FDM Printing Settings (for guidance only)

Main Part + Legs:
Material: PLA, PETG
Nozzle dia.: 0.4mm
Layer height: 0.2 mm
Wall thickness (top, bottom, side): min. 1.6mm
Infill: min. 15%

TPU Top Pads + TPU Leg Pads:
Material: TPU 95A or TPU 90A
Nozzle dia.: 0.4mm
Layer height: 0.2 mm
Wall thickness (top, bottom, side): min. 1.2mm
Infill: 100%

No Supports required!

See thumbnail picture for recommended printing orientation of each individual part.

4x Socket Head Cap Screw M3x20mm + Glue required for assembly.

Deburr the edges of the TPU pads if required.
Place the TPU top pads into the corresponding grooves of the main part and glue them to the main part.
Assemble the main part with the legs with 4 screws. Tighten the screws until the stands reaches the desired resistance in motion. Do not overtighten the screws!
Press the TPU stand pads into the pockets of the stands and glue them to the stands.
Make sure the stand rests evenly on all four stand pads before the glue dries.

These settings, recommendations and instructions are provided for guidance purposes only. Actual parameters may vary depending on your 3D printer, filament type, environmental conditions, and other factors. The provider (creator of this design) makes no warranties, express or implied, regarding the suitability or accuracy of these settings, recommendations and instructions and assumes no liability for any damages, malfunctions, or unsatisfactory print results arising from their use. The user is solely responsible for inspecting and verifying the functionality and safety of the printed object(s) before use.
This also applies to any instructions in the images.