ドローン・ドラム・ドロップシステム

Awesome FPV Drone Drum Dropping System for Airsoft and Other Applications.
Has been tested in action. Has a quick mount as you can see, the mount is for the mark4 7-inch frame but the counter part without holes is included so you can costume it to fit you drone. Example see video.
If you have the know-how, you can also fit this on a DJI Matrice but you have to make your own mount (see last picture).

Weight around 210g

Need:
1x MG996 servo 360
8x screws 3×20 mm
5x screws 2.5x20mm

Included:

All STL files
Assembly guide/instruction
Electrical schematic

Easy to build.

We recommend getting the FPV extended Legs you can find on our Page for free, you will need them.

UPTADE:
The system has been improved: it now works without an Arduino and some parts have been reinforced. You only need an MG996 servo and you're ready to go. Parts that didn’t fit properly before have also been fixed.
Has now a Clip on feature (see video)
We also uploaded a larger version, but it's a older one (see picture).
Designed to actually work – unlike the other one on cults.

You won’t find this anywhere else!
Check out my other designs

If deleted, it will be reuploaded — no worries.

https://youtube.com/shorts/OwzR430jv7M?si=ZFQLe8kfDlrbDeQs

PETG
0.3mm layer height
0.2mm for the gears
Dont print with the outer walls first
Atleast 50% infil
Choose strong infill pattern
Supports needed for servo cover
Need thick first layer and slow printing for:
Amplfier
Botton Drum
Drum cover
Main body
Toop center part