スキアライド 2 MKC HD フロントエンド

Wanting better stability and strength for the skeeride 2 rc sleds? That's what this setup is all about. With a very thick and rugged design, wider arms and rod end inserts you combine characteristics needed to help the sleds handle and perform better in many conditions.

This setup will work for both the Skeeride 2 G5 skidoo and the Polaris Matryx. The a arms were designed to work with both sleds so they are interchangeable. Either spindle can be used depending on what look you want.

A Arms use traxxas m4 rod ends, Part 5525 or 5525R, or you can use a 7mm round aluminum rod end. Use m4x16, 18 or as long as 20 for the rod end to arm connection.

A single long screw is used for both polaris and skidoo spindles. Use an m3x40mm for the skidoo, and either an m3x40 or up to a 45mm for the polaris.

Standard 90mm shocks can still be used. Using an angled rod end for the tie rod spindle connection.

For Skis, use my MKC Pro fs skis with the skidoo width - 13.5mm is needed to fit the spindles. Skis from vassa or stock skidoo skis will work as well.

DO NOT SHARE OR SELL THESE FILES.

SKIS - https://cults3d.com/en/3d-model/game/skeeride-2-float-stability-ski

PLA+ - 6 Walls 100% infill for strongest settings.

Use normal supports