Robotech RPG Tactics Recon Battlepod Macross Zentraedi

Zentraedi Recon Battlepod intended for Robotech RPG Tactics
The zip file includes the following models:
- Radar sensor for the top of the head
- Small antenna for the eyebrow area of the head
- 40mm size Base (2 versions, one with triangle cut-outs like the originals and one without the triangles)
- Head (2 versions, one with a wedge cut-out for the small antenna, and another version with the small antenna already attached)
- 4 leg models, each in a different pose, including:

#1 Walking with left foot forward
#2 Idle / Standing
#3 Ready / Crouch
#4 Walking with right foot forward

The original manufacturer parts require you to glue together about 20 different things to assemble one Recon Battlepod
My 3D printed version only requires 4 steps to glue the pieces together:
1) glue the radar sensor to the top of the head
2) glue the two small antenna to the eyebrow area of the head
3) glue the head to the legs
4) glue the legs to the base
That's it. Done

Check out my other Cults3D listings for Artillery Battlepods, Regult Battlepods, Officer Battlepods, Female Power Armor and Bases sold separately

I also have a free Robotech video game you can play in your browser. Just go to itch.io and search for Battroid Attack

Models are set to the same scale as Robotech RPG Tactics, so you shouldn't need to resize them
The pictures are prints from a 0.4mm nozzle at 0.2mm layer height using PLA with infill at 10%
I recommend that the models be printed with supports turned on, except for the bases
The head model should be flat on the print bed with the nose pointed straight up to minimize supports on the sensors
The radar sensor should stand up with the front of sensor tipped forward to minimize supports
The two small antenna should sit with the antenna pointed straight up, no supports needed
Each set of legs can be printed with feet flat on the print bed but will need supports, and I recommend Tree supports in Cura