Helldivers2 B-100 Portable Hellbomb

This is a miniature Helldivers2 B-100 Portable Hellbomb desktop figurine. The model stands approximately 13cm tall. The backpack and the bomb itself can be separated, and the retaining clip is a removable mechanism.

The color parts of the model have been separated, with minimal supports. Some details have been simplified for easier printing.

1. I used multi-color printing for the screen fonts and prepared a 3MF file that BambuLab can recognize. You can also design your own numbers and patterns based on the size. The front and side panels have anti-aliasing features to prevent incorrect placement.
2. The backpack's bottom straps are printed as a single piece, with clearance reserved for removable after removal from the hotbed. The upper straps require a 1.74mm diameter filament to thread through and secure.
3. The backpack's retaining clips also secure the back panel with 1.74mm diameter filament. 4.4.The bambu.3mf file has been separated into multi-color and single-color printing sections, allowing for printing after material adjustments. It is recommended to use PETG printing for the gripper section to achieve higher strength.