コンテンツへスキップ

3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC

2drPickup1.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2a.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2b.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup3.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup4.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup5.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
trx-4-chassis-comparison.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup1.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2a.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup2b.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup3.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup4.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
2drPickup5.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
trx-4-chassis-comparison.jpg 3D PRINTED RC CAR HUMMER H1 2 DOOR PICKUP BODY BY AN3DRC
共有
追加
Make
?
作品の品質： 5/5 (1票)
プリントのしやすさ、実用性、ディテールなどに関するメンバーの評価。
ライセンス
用途
3Dデザインの形式
1件のファイル (ZIP) 閉じる
  • [AN3DRC] 3D Printed Hummer H1 2 door Pickup body v1.15.zip
    • Basic parts/H1 Basic quarter front left.stl
    • Basic parts/H1 Basic quarter front right.stl
    • Basic parts/H1 Basic quarter mounting hook left.stl
    • Basic parts/H1 Basic quarter rear left.stl
    • Basic parts/H1 Body floor bracket left.stl
    • Basic parts/H1 Receiver box cover.stl
    • Basic parts/H1 Side stand left(for 2door pickup).stl
    • Basic parts/H1 Upper cross connector central.stl
    • Basic parts/H1 Upper longitudinal connector left(for 2door pickup).stl
    • Battery boxes/H1 Battery box big cover.stl
    • Battery boxes/H1 Battery box big.stl
    • Battery boxes/H1 Battery box small cover(short shocks).stl
    • Battery boxes/H1 Battery box small(short shocks).stl
    • Decorative parts/H1 Air filter barrel pipe.stl
    • Decorative parts/H1 Air filter barrel.stl
    • Decorative parts/H1 Air filter head v2.stl
    • Decorative parts/H1 Air filter head.stl
    • Decorative parts/H1 Batteries imitation.stl
    • Decorative parts/H1 Cargo area tube left(2 door).stl
    • Decorative parts/H1 Pedals unit.stl
    • Decorative parts/H1 Pickup rear roof stop light.stl
    • Decorative parts/H1 Wiper ball pin.stl
    • Decorative parts/H1 Wiper base.stl
    • Decorative parts/H1 Wiper.stl
    • Doors/H1 Door bracket pt1( for mirror left).stl
    • Doors/H1 Door bracket pt1.stl
    • Doors/H1 Door bracket pt2.stl
    • Doors/H1 Door card front left.stl
    • Doors/H1 Door front left.stl
    • Doors/H1 Door handle left.stl
    • Doors/H1 Mirror left.stl
    • Front window frame/H1 Front window central stand.stl
    • Front window frame/H1 Front window frame left.stl
    • Front window frame/H1 Front window lights bar.stl
    • Hood/H1 Head turn signal body.stl
    • Hood/H1 Headlight body.stl
    • Hood/H1 hood front grille.stl
    • Hood/H1 Hood grille.stl
    • Hood/H1 Hood left(v1.15).stl
    • Hood/H1 Hood locker basic part left.stl
    • Hood/H1 Hood locker left.stl
    • Hood/H1 Hood right(v1.15).stl
    • Hood/hood old version/H1 Hood left.stl
    • Hood/hood old version/H1 Hood right.stl
    • Interrior/H1 Driver interrior panel.stl
    • Interrior/H1 Passenger interrior panel.stl
    • Interrior/H1 Seat left.stl
    • Interrior/H1 Steering wheel.stl
    • Interrior/H1 Tunnel cap(for 2door pickup).stl
    • Interrior/H1 Tunnel pt 2.stl
    • Interrior/H1 Tunnel pt1(2 door min).stl
    • Interrior/H1 Tunnel pt1(2 door).stl
    • Rear side/H1 cargo area floor cap left.stl
    • Rear side/H1 Cargo area floor end(for pickups).stl
    • Rear side/H1 Cargo area floor extender connection.stl
    • Rear side/H1 Cargo area floor(short shocks).stl
    • Rear side/H1 Cargo area space floor extender(for 2door pickup).stl
    • Rear side/H1 Fender rear left (for pickups).stl
    • Rear side/H1 Fender rear right(for pickups).stl
    • Rear side/H1 Floor side extension left.stl
    • Rear side/H1 Side cap left(for 2door pickup).stl
    • Rear side/H1 Tailgate bracket pt1.stl
    • Rear side/H1 Tailgate bracket pt2.stl
    • Rear side/H1 Tailgate.stl
    • Roof/H1 Roof left (for 2-door pickup ).stl

形式の詳細はこちら
公開日
デザイン番号 1975992
デザイン作者 AN3DRC_H1
AN3DRC_H1

AN3DRC_H1

認定アカウント
このデザインに問題がありますか？ 問題を報告する。

3Dプリンター用ファイル情報

3Dモデルの説明

I present to your attention the best 3D printed Hummer H1 in the world !!!

Attention only the 2 door Pickup body is published here! In order to assemble the complete model (as in the photo), you also need to download the Chassis and Gearbox

Attention! This body cannot be installed on the TRX-4 / SCX10 chassis! It has its own chassis! You can see a comparison of the dimensions of the TRX-4 chassis and the Hummer body in the last image!

Chassis: link

Gearbox: link

Wagon body: link

Slantback body: link

Pickup body: link

Military Humvee body: link

Instructions with all the necessary information, a list of parts to buy and a list of used screws and nuts are published at the link: link

Instructions with printing recommendations can be found at this link: link

The assembled model has the following technical characteristics:
- This model is designed on a scale of 1 / 8.5.
- Length approximately 550mm.
- Width approximately 260mm (without mirrors)
- Wheelbase - 388mm.
- Track - 220mm.
- 4x4
- All mechanisms are working! Doors, hood, tailgate can all be opened and closed.

All details can be printed on a printer with a 200x200x200mm print area. I printed everything on my Ender 3 Pro.

You can see more photos on my Instagram: link

I have a Facebook group, if you have any questions you can ask them there link

Test ride video: https://www.youtube.com/watch?v=z_DQVSOeh70

Attention! Many details on the right side are mirrors of the left side. So if you can't find a part for the right side in the archive, just make a mirror copy of the left part in your slicer!

Upd 31 Jan 2021---------------------------------------------
Big update v1.1 for chassis and bodies!
Whats new come with this update you can see in this presentation https://docs.google.com/presentation/d/1TxHhYKVKwII4jKq7qA5wcRCS4tXbHYeXIsXKtNv49V0

Upd 12 Apr 2021 ----------------------------------------------
Update v1.15
-The hood has been changed: it is divided from two to three parts this will save filament on the construction of supports when printing.
- Front base quarters changed. The Hood locker attachment point is now a separate part. If this area is damaged, you will not need to print the entire base quarter.
-Small bugs fixed

3Dプリント設定

PLA.
Walls 3-7
Filling 15-30%
Layer height 0.12-0.2
Nozzle 0.3 - 0.4
Different for different parts.

カテゴリ

すべてのカテゴリ › ゲーム › RCビークル / オート＆モト / 機械玩具

タグ

Cultsを応援していただけませんか？

Cultsを気に入っていただけましたか？これからも独立した運営を続けていくために、ご協力いただけますか？ 私たちは4人の小さなチームです。そのため、サイトの維持や今後の開発**を続けるには、みなさんのちょっとした応援が力になります。どなたでもできる3つの方法をご紹介します。

  • 広告：広告ブロッカーを無効にします。
  • 寄付： Ko-fiを通じて[寄付]をお願いします
  • 口コミ：友人に紹介し、コミュニティで共有されている素晴らしい3Dファイルを広めてください！

Cults3Dでの共有やダウンロードを行うと、デザインがMakersコミュニティの手元に残ります！ 競合プラットフォームを持つ3Dプリンターメーカーやソフトウェア大手の手に渡り、彼らの営利目的のためにデザインが利用されることはありません。

Cults3Dは、投資家やブランドに左右されない独立した自己資金運営サイトです。サイトの収益のほぼすべてがプラットフォームのMakersに還元されます。サイトで公開されるコンテンツは、著作者の利益のみを追求しており、3Dモデリング市場の支配を目論む3Dプリンターブランドの利益のために利用されることはありません。