BEam StreamDeck Riser v3

This is a modular folding riser stand, designed primarily for StreamDeck tabletop control devices (e.g., Plus, XL, Neo).

It consists of four components: a bottom plate (with a compartment for storing the legs), a top plate (with a rear stopper to prevent the StreamDeck from sliding or falling), and two legs that cross and connect at 90 degrees.

The bottom plate includes four circular recesses (10 mm diameter) for rubber feet or magnets.
These should be purchased separately and glued in by the user.

For best results - please follow the recommended settings

Disclaimer & Terms of Use

Digital Files Only: You are purchasing digital design files (STL/3MF), not a physical product. The price reflects the time and effort invested in the design and 3D modeling process.

Manufacturing Responsibility: The printing and manufacturing process is solely the responsibility of the user. Success depends on numerous factors beyond my control, including but not limited to: filament quality, printer calibration, slicer settings, environmental conditions, and user expertise.

No Engineering Guarantee: While these models are tested for fit and functionality, I am a designer, not a materials engineer. These models have not undergone industrial stress testing or safety certification.

Assumption of Risk: By downloading and printing these files, you agree that I (the designer) shall not be held liable for any failed prints, damage to hardware, or any secondary damages or injuries resulting from the use or failure of the printed object.

Support: I provide recommendations for print orientation and settings based on my own successful tests. However, I cannot provide technical support for individual hardware issues or specific printing failures.

Recommended settings:

0.20mm Standard @BBL X1C
PLA or PLA+ or PLA Matte
4 walls (to keep it rigid), outer to inner
15% Gyroid infill
Ironing enabled on top surfaces for a cleaner look.
Orientation: as shown is the modeling photo.