Snowman - Merry Christmas - Multiparts - Multicolor

3D Models Snowman, ready to print. Your purchase includes 1 zip file with 13 separate stl files, designed with inserts to facilitate and improve the finish when printing.
Tips for printing your stl files:
- In case you are printing in FDM with PLA material and you do not have calibrated tolerances, you can facilitate the insertion of pieces by applying a little heat with a hair dryer or heat gun on the male joints.
- You can also leave the piece on the print bed at 80° for about 5 to 10 minutes so that the material softens when inserting. - You can also leave the piece on the print bed at 80° for about 5 to 10 minutes so that the material softens when printing. You can also leave the piece on the print bed at 80° for about 5 to 10 minutes so that the material softens when inserting.
If you have any comments or problems when printing, do not hesitate to write to us, your opinion helps us to continue improving.

• Layer Height: 0.24
• Infill: 5% - 8%
• 2 Wall Lines (3 if you want more resistance)
• Activate Tree Supports for a better finish (Depending on your machine between 60° and 75°)
• Activate Support Interface to improve Support-Piece adhesion
• Activate Edge to improve the adhesion of the piece to the bed But feel free to experiment with different settings to achieve the finish you want!"

Categories