Rafale MSLA

Rafale M - Dassault - 1/100 scale - smooth configuration - retracted landing gear - standing.

One-piece, high-definition model with engravings and scale-relevant details, designed and optimized for MSLA resin printing and painting.

*This is not an adaptation of the other Rafales I've offered for FDM printing: this one is completely remodeled from scratch, with superior accuracy and maximum detail.

Files:

• Model Alone

• Pre-supported model (tested valid)

• Canopy option (full bubble, to be added to Rafale Seul for a full bubble)

(I strongly recommend the use of precision pliers to detach supports in fragile areas)

Dimensions (device only): ~120mm x ~150mm x ~50mm

Should be able to be made at other scales without worry, or on FDM printer if cut correctly.

Free 1/100th scale foot in a separate file:

https://cults3d.com/en/3d-model/art/support-maquette-1-100eme-type-1

Device/foot assembly by gluing (Cyano)

Time lapse video of the last printed prototype:

https://www.youtube.com/watch?v=bb0d_NAbMBU

Elegoo Saturn 4 Ultra + Film ACF + Heating Chitu systems

Sliced on Chitubox pro

Decals available in the images, for two special liveries I made specifically for the model:

Simple image to be printed at 300ppi / 100% scale on commercially available decal sheets:

https://www.amazon.fr/dp/B077TMFVL9

print on a conventional printer, varnish, cut, soak in water for one minute, apply