Flexy crab

🦀 Flexy Articulated Crab – Print-in-Place

Meet this chunky little flexy crab! Designed as a print-in-place articulated model, all legs and claws move right off the bed — no assembly required.

The body has a smooth, rounded shell and simple raised eyes, while each leg is fully jointed for satisfying wiggle and poseability. The claws are oversized and chunky, giving it a cute but sturdy look as if giving a thumbs up for good job.

Perfect as:
Desk buddy
Fidget toy
Kids gift
Beach-themed decor
Market or craft fair item

Optimized for FDM printing. Works great in PLA and most standard filaments.

No supports needed (depending on your printer tuning). Just slice, print, and enjoy the wiggle 🦀

Printer: Anycubic Kobra Plus
Material: PLA
Layer Height: 0.2 mm
Nozzle Size: 0.4 mm
Infill: 20% (Cubic)
Wall Thickness: 1.2 mm
Top/Bottom Thickness: 0.8 mm
Supports: Not required

Build Plate Adhesion: I used it but was very careful when removing it and it worked but avoid if possible.

This model was designed for support-free FDM printing.
Print upright flat on belly