Celeste | Deadlock | Prop

----This is a 3D File ONLY---
Celeste Baton | Deadlock

3D Modeled in SolidWorks. It is intended for Cosplay use.
Pre-sliced for easy assembly, sanding, and painting. If you have any questions, feel free to message me.
Separate by object in slicer

Not intended for distribution. Made for ONE person to use. Not to be sold or distributed to others.

The model has been designed for super-easy gluing/assembly. Every piece slots into eachother for quick alignment. Pre-sliced, ready to go.
Baton requires a dowel rod for extra stability; details below.

Intended for FDM printing.
Recommended Filament: PETG, ASA, PLA+, ABS
Do not print in PLA unless it will always stay in a climate-controlled area

The file is sliced into 11 pieces. They are sliced to have flat surfaces and separated by color. Creating easier sanding and painting. Most pieces do not require support material; three pieces just need ~4g total.
Separate by object in slicer

Size: 30.00 x 1.70 x 1.70 in (46.41 x 5.46 x 112.78cm)
Filament: ~200g in original size
Infill: Recommended 8-14% infill with 3 wall thickness.

Dowel rod
3/8th in, 29in long
(0.953cm ⌀, 73.66 long)
I added a tolerance for the dowel rod. If your dowel rod is too lose i reccomend adding pieces of tape to thicken it. (I do this for a lot of my props)

There are STL and 3MF file options in the download. I recommend using the 3MF files if your slicers allow it.
Separate by object in slicer