🔹 Custom 3D Adult Models & Modifications 🔹
I create custom 3D models of adult products on request. If you need a unique design or modifications to any of my existing models, feel free to contact me!
💡 Want changes to a model? I can adjust any of my uploaded designs to fit your needs. Small modifications are available for donations.
💬 Message me for details!
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇺🇦 Paese dell'utente: Ucraina
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Button keep getting stuck?
Hello, most likely the top lid areas need to be manually cleaned where the supports were.
Tried this and still the same, tried another print still the same, seem there isn’t enough of a gap when completely sealed for the button to move
I’ll now adjust that part of the model and reduce the support by 0.2 mm. I personally print with a 0.1 mm layer height using filament from an electric dryer. Of course, instead of supports some filing is required, but in my case the result comes out perfectly.
Hi, I got the double balloon design, but it's missing the airhole for the external cylinders
It has been translated into English. I’ve updated the model, you can download it again. Sorry for the mistake.
?
hola buenas, he descargado el archivo de la ruleta para sexo, el problema es que la placa selectora del juego, cuando pretendo laminarla, no soy capaz de que el laminador me muestre nitidamente los detalles de los muñecos que muestran la postura. He probado a cambiar el diametro de boquilla pero aun asi este no termina de laminar correctamente las siluetas.
Hello, the link contains the slicer settings required for printing. There are two of them: a 0.2 mm nozzle and Arachne slicing mode.
or the Kamasutra roulette it does not work the mechanism or the actual roulette either or it does not spin due to the roulette does not reach the pin to spin with the mechanism. i have not scale it or make any changes.
Hello, please take a photo, I'll see what you've come up with.
Hey I figure it out for the mechanism to work now I have an issue with the actual roulette is the Kamasutra positions they the file has a an error and when the slicer corrected it deletes the figures, and if I don't fix it and printed like that it it prints like shades of the figure, and you can barely see the positions
A file with a drawing height of 0.8 mm has been added (Kama_Sutra_disk_08). After coloring the drawing, you need to split the objects into separate parts so that the drawing prints completely. In Bambu Lab Studio, right-click on the object, then choose Split, then To Objects.
Hallo, ich wollte dir nur mitteilen das jemand deine Datei unter seinem namen weiterverbreitet, auf makerworld und auf thingerervers. https://www.thingiverse.com/thing:7284389
https://makerworld.com/models/2340287?appSharePlatform=copy
Liebe Grüße
Hello, thank you.
for the Kamasutra roulette it does not work the mechanism or the actual roulette either or it does not spin due to the roulette does not reach the pin to spin with the mechanism. i have not scale it or make any changes.
hi ive bought the file but ive download it and its goes into notes? no stl file? can you email me the correct file stl please . crroofing2020@yahoo.com thankyou
sent
I am interested in the way I masturbate with this
Hi, I purchased a sniffer cap, but neither sizes fits any of my bottles. Do you make caps for 15-425 bottles?
Write to me, and I will create a model to fit your thread. https://discord.gg/45tXG3Vm
"Unable to accept invite", sent you a friend request
hi for thee pee like girl model any chance you could make a 4mm version for both variants
I didn’t quite understand. Please specify exactly which model needs to be changed and what needs to be modified.
The “pee like a girl” chastity cage, could you make the rod size 4mm instead of “6mm”, you also have two different curves for that size as well if it isn’t to much of a hastle could you make the size smaller for both curves?
I added a catheter with a diameter of 4 mm to the model.
Hi, recently purchased and printed 'Gag in mouth with nostrils', however the gag is too large to fit in my subs mouth. I don't think I can scale it down in the slicer as I would like the nostrils to stay the correct size. Do you have a smaller version available?
Wondering if you would sell the cake pop mold and tray files as a group or do we have to buy them individually?
The tray and the mold are included.
Hi recently purchased Double cap for essential oil inhaler and was having a difficult time connecting the bottom with the topper I understand I need to sand down the open/close wheel. Unfortunately indont thin that will be enough is there anyway to modify the file where the lip on both top and bottom parts is taller so the two connect better ? I think sanding the lip download be better fit than sanding the wheel? Your thoughts?
More than happy to make a donation for this modification.😄
Donations are welcome. I’ll see if I can do something today or tomorrow.
Sounds good. Thank you
Can I hire you to a part for me in 3D?
Hello, write https://discord.gg/CF2NWNw6qY
where did you find the tamper-resistant trilobe screws ?
got it thank you
Hi
today i ordered / downloaded the Innovative female chastity belt.
There is a problem in File pl.stl
in your pictures both sides are smoth without irregulations.
Afte rdownload in Slicer you will see inperfections like Ghostly standoffs on the inner side they will be printed to.
Also you can see it on the 3d Preview on Cults the inner side has some inperfections.
Please fix that and send it to me!
Thanks for your Help
Chris
Hello, the file has been corrected and can be downloaded.
Hello,
I am wanting to discuss getting a storage box made, I have added you on discord!
Hello!
I saw that the file have measurements for two sizes of bottles. Do you know if the larger size fits the ”bigger square bottles” like amyl 24ml?
Can you measure the thread parameters on the bottle?
Id say it’s like 19mm Ø and 7cm when I measure it around the bottle opening without lid on
Try printing this thread, it should fit. https://fex.net/s/oy4ffxe
Why are your links in Russian?
Hello,
It’s me again 😁
Could you please make a cake pop roller with 3 tracks and a diameter of 32 mm?
I'll do it, just give me a photo
Hello,
can you make cake pops form with heart shape please?
Good afternoon, I’ll do it tomorrow.
Thank you so much ❤️
love it
Translated: Здравствуйте! Я хочу сделать коллекцию баночек для специй, не могли бы вы сделать резьбонарезной инструмент для этой крышки? В идеале, я бы хотела сама напечатать эту крышку, так что если вы тоже заинтересованы в ее создании, это было бы здорово! Моя цель - сделать маленькие баночки для специй в виде домика, как в деревне специй Lennox, но на задней части крыш, есть этот винт на вершине, так что мне не нужно снимать крышу дома с баночки для специй. Если я смогу напечатать крышки самостоятельно, я также смогу напечатать их в цветах, которые будут соответствовать крышам, которые я буду рисовать, что было бы замечательно!
Переведено с помощью DeepL.com (бесплатная версия)
English: Hello! I want to make a collection of spice jars, would you be able to make a threader tool for this cap lid? Ideally, I'd actually love to print this cap lid myself, so if that was something you are interested in creating too, that would be awesome! My goal is to make little house spice jars like the Lennox spice village, but on the back of the roofs, have this screw on top so I don't have to remove the roof of the house off of the spice jar. If I can print the lids myself, I can also print them in colors that will match the roofs I'm painting, which would be amazing!
Вот фотография банок, которые я пытаюсь сделать/Here's a picture of the jars I'm trying to make: https://ibb.co/pvdv5SnB
Вот крышки, которые я хочу использовать/Here's the lids I want to use: https://www.amazon.com/dp/B079PWSGVT/ref=sspa_dk_detail_2?pd_rd_i=B07FQX7X4M&pd_rd_w=Y3uEG&content-id=amzn1.sym.8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_p=8c2f9165-8e93-42a1-8313-73d3809141a2&pf_rd_r=SNXCMNV4A26W5W8V13T1&pd_rd_wg=nkM7V&pd_rd_r=1d9b106d-3d3d-40ae-ac7f-fb58c0e52257&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWw&th=1
Good day, do I understand correctly
1. I need a plastic lid like in the link
2. I need a form for forming threads on a ceramic jar
Yes, that’s correct. I’d also like to be able to scale the design so I can figure out the right size.
Scaling won’t work because it will increase the gap between the thread on the cap and the thread on the bottle neck.
Also, the two flip lids on top of the cap should be made with hinges, not printed as one piece. If they are printed in one piece, they will likely break off after printing.
That makes sense. In that case, I'd like to do it in the dimensions of the cap in the link, I think that size will work for what I'm trying to do.
The lid diameter is 48 mm. The height can be adjusted, but the thread is different, so you’ll need to create a custom one. This lid will not fit the jars shown in the listing where it's being sold.
I am making my own version of the jars from scratch with ceramics, so they don’t have to fit the house style jars in the listing, I can make the dimensions of the jar based on the lid size you make.
Alright, I'll do it tomorrow and add it to the models.
Good afternoon, the model is ready.
https://cults3d.com/en/3d-model/home/soris-lid-with-two-flip-caps-and-thread-forming-ring-for-ceramic-jar
I also have the issue with '6 non manifolded edges' can you please have a look at the file and resolve this? Thank you! https://ibb.co/KpxQ4c2W
this is a problem with the bambulab slicer https://fex.net/s/yym8oo8
I don't understand.. It just loads to the bambu a1 mini https://ibb.co/JRCwnLN4
After downloading, click the button I marked in the picture https://ibb.co/mC4hvx9K
Ok thanks, do all 3 parts need to be printed at 100% infill or can the protective case be printed at 50% for example?
Everything needs to be printed with 100% filling.
Thank you for the, with all the files I bought can I please get them in 0.4mm? I don't have a 0.2mm nozzle and didn't realise until tonight when trying to print them.
The only print profiles are for a 0.2mm nozzle
can be corrected by the arrow in the picture 0,4mm https://ibb.co/gFW1qbbG
Ahh thank you so much - I didn't even see that option.
Do you have any tips for me to resolve this issue.. Only these files I've had issues with printing, the base doesn't adhere to the bed and the print is lifted off during the initial stages of printing. What would be your advice to resolve this? I've washed the plate, calibrated, oiled rails..
https://ibb.co/21BKsMPM
https://ibb.co/39r0mBx1
https://ibb.co/0j3KgYDY
https://ibb.co/k6yzwfPX
https://ibb.co/MkLmysTF
I print with PETG plastic. The bed temperature is 75°C, and I use glue. Without glue, the part peels off.
Use glue for 3D printing.
The printer should be placed so that it is not in a draft.
Ok thanks great tips
You were right, glue worked thank you. Can you modify the design of the single inhaler? After printing 6 they all have the same issue of very poor air flow. I think it's because of the supports that form on the top? It's very hard to inhale and air. Is the air flor obstructed by the design do you think?
https://ibb.co/qXg6vKd
https://ibb.co/s9K7qCNy
https://ibb.co/wF863ckt
your supports are set up incorrectly, they should only be from the table, but you have them inside - https://ibb.co/DHPLTPYF
I will give it a try thanks!
I have printed several inhalers and they all do not fit in my carry container. I will assume the bottle is slightly taller than yours. Can you please edit the size a few millimetres so that I am able to shut the lids? Both inhalers suffer the same issue so I will assume it's the bottle height.
https://ibb.co/prhk2pgR
https://ibb.co/G3BpLP7H
https://ibb.co/Q3x3ZJYZ
https://ibb.co/d0d6Fxm7
and what is the height of the bottle?
It's 8.5cm tall
added a cover height of 3 mm https://fex.net/s/8z1ycez
We have made a paid subscription for commercial use of all our models - https://patreon.com/speak3d
I will check your it out, thank you. Currently in testing and the design has failed twice.
Both times separating from the seam on the lid.
Bambu Lab PETG 100%
PTFG gasket installed
No leaking
Do you have any ideas or is this design flawed?
Both times amyl was in the bottle for 24+ hours.
I’m still testing the single inhaler but only early stages. Pretty disappointed with the dual inhaler.
Both friends who are testing it confirmed that they did not over tight the bottle. They also said you can still smell amyl when the bottle in closed fully.. I have a 2.2mm PTFE disc because I didn’t want it to move like the 2.0mm disc was inside the cap.
First:
You can increase the thickness in this area. But if the vapor seal isn’t tight and vapors escape from the bottle, they can dissolve the plastic. And judging by the photos, it looks like the plastic was dissolved by the vapors due to prolonged exposure — that is, because the cap didn’t fit tightly.
Second:
It’s possible to print it using a more chemically resistant plastic, such as PP, or the most resistant one — PEEK.
Do you have any suggestions regarding vapor seal? I followed you’ve specifications, the bottle fits tight to the cap and forms a water tight seal..
When you say I can increase the thickness.. can you advise what setting you think I should change?
I will reprint and attempt to thicken the walls. Can I please make a modification, can you add a total of 4x intake holes to each side of the inhaler for the single and double inhaler please?
I will experience with thicker and wider PTFE but a complaint I’m getting is the airflow is limited. I think this modification will help. I still need to solve the vapor issue tho.
I’ll make the model thicker.
Ok thank you, for both inhalers please. If you can add the 4x air intake holes either side instead of x2 that would be great.
I want to sign up to your patreon but if the design fails I won’t be able to sell it.
:(
Hey I have a design change in mind can you help me with this? I propose you leave the thickness as is, add 4x air intake holes each side and then can you pause the print file at the right time so I can insert larger PTFE discs?
This will allow me to get larger discs in because as it turns out the size recommended is too small and I can see now on the one that failed why it failed.
I think pausing the print will be the way to resolve this, along with larger and thicker PTFE discs.
Can you please modify both the files for single and double inhaler? I will re order the discs and see if this fixes the issue.
Let me know what you think, thanks for your support.
If we can solve this and it's successful I will look to buy the license off you.
fluoroplastic gasket thickness 1.5 mm?
Yes, however it's too small. The depth from the lid to where the designed air chamber is, is 2.5mm.. So I will get the new PTFE cut to that depth and it should seal perfectly to the intake hole.
I think pausing the print will allow greater tolerance and a larger disc to avoid the issues I'm having right now.
If there was an overhang to support the disc from underneath too that would be even better, or if the thread continues up to form a platform for the disc to rest on when the print pauses.. Currently the disc will fall through as it only just rests on the end of the thread..
To properly embed the gasket, the diameter should be 25 millimeters, and a thickness of 2 millimeters can be used. https://ibb.co/ds2WSdsS
Yes, that's what I measured as well. I can pause the prints at slice 71 and it should allow me to insert a gasket. Can you modify both 1 and 2 nostril inhalers I bought:
Thank you! I'm glad we can figure this design out..
I added a file with the changes, you can download it - https://cults3d.com/en/3d-model/various/cap-essential-oil-inhalation-kit
I'll change the file to one nostril now
I added a file with the changes, you can download it - https://cults3d.com/en/3d-model/various/cap-essential-oil-inhalation-kit-mono
Thank you - the single seems to have some issues though, can you please have a look.
I updated the file by uploading it to Bambu Studio.
Have you updated Bambu Studio to the latest version?
Yes, 2.1.1.5.2 is the latest.. what's causing the issue?
I updated the file through Bambu Studio, so it should display correctly now. I'm using version 2,0,3,54 of Bambu Studio.
Ok great, I'll double check. What slice layer do I need to pause at? Correct me if I'm wrong but layer 71 and I won't use supports as the disc will act as the support when I insert it, correct?
It also seems to depend on the layer height. I have the first layer set to 0.2 mm, and the following layers are also 0.2 mm. In the image, I showed that the pause should be set on layer 71, because layer 72 closes it.
https://ibb.co/GfV9cVF0
https://ibb.co/Z1g659fV
Supports during printing are not needed, or can only be used with custom settings for the air outlet holes. In the center of the cap, the support will actually be the PTFE gasket itself, which will rest on the platform located in the center.
Ok great and a 2mm disc should fit perfectly. Let’s hope we solved this. Thank you.
Printed the thicker inhalers, they feel better. Waiting on new PTFE to arrive. Any reason this might be happening to the case? I'm getting a layer separation, dried filament, tried PLA and PETG so im confused.
https://ibb.co/Lhd8Mp5H
https://ibb.co/Ndsqm2Zv
https://ibb.co/xSG55ygm
What is the print layer height?
check if the print temperature is set correctly
What the print layer height be?
For the box, you can use a 0.2 mm layer height. For higher quality printing, use 0.12 mm.
The stringing only occurs when the box changes thickness at the top to allow the lid to snap on. Is there anything I can do to resolve it you can think of?
What layer height are you using for printing?
0.2mm
Send me the 3MF project file from Bambu Lab Studio. I’ll load it into mine and check — maybe some settings are incorrect
I solved it by using variable layer height, I didn't realise that was an option
I have new PTFE gaskets 25*2mm and the print fails to print over the top of them, it drags filament. I assume there isn't enough height clearance for the gasket, can we adjust and retest? If you can change 1 design I'd be happy to reprint and provide feedback if we are good to change all the designs. With the gasket, there will be a slight tolerance from the factory, they say +0.05mm max.
We also no longer need the middle support as the gasket sits perfectly inside on its own, can we please remove it?
https://ibb.co/J16TGhS
https://ibb.co/67BknH1x
https://ibb.co/Cs4ByXTL
https://ibb.co/S4prrvTL
https://ibb.co/JSjxR1n
https://ibb.co/YSwRgfr
Layer height for the first layer: 0.2 mm
Layer height for subsequent layers: 0.2 mm
Bridge printing speed: 25 mm/s
Please try to adjust the settings accordingly.
With a 0.2 mm layer height, there should be a 0.2 mm gap left. If the bridge printing speed is too high, the plastic strand may tear. In principle, I can add another 0.2 mm in height so that the gap above the fluoroplastic cover is 0.4 mm, but it’s unlikely that it will help.
Ok, the only setting that is different is Bridge printing speed: 25 mm/s, I'll print this now and see how I go.
Slowing the bridge speed down somewhat worked however, I assume because there is nothing for the layer to adhere to it warps. Any other suggestions?
Please provide your email address. I will increase the distance there by 0.2 mm and send the updated model to your email.
Hey, recently purchased some inhaler files. May I please have have the file without your brand logo on it?
Thank you!
Hi, are all the designs in your Patreon as well?
Or do you have a discount when purchasing more than one (personal use only)?
Was looking at the cages and poppers caps, but not sure which ones work best for us.
Not all models are available on Patreon. I can offer a discount — every 5th model is free.