/https://fbi.cults3d.com/uploads/user/avatar/4583648/wm.png "WesleyMillora")
Designer who simply loves bringing ideas to life.
Follow me on Instagram @wesleymillora.
👋 Ciao a tutti! Questa conversazione è pubblica, quindi manteniamo un atteggiamento gentile e rispettoso. Niente pubblicità, spam o cose sgradevoli!
🇺🇸 Paese dell'utente: Stati Uniti
🌐 Lingua preferita del membro: Inglese. Puoi tradurre online tramite DeepL.
💡 Ti riferisci a un modello in particolare? Aggiungi il link, il titolo o il numero del modello.
🖼️ Vuoi pubblicare delle foto? Utilizza un host gratuito come ImgBB e incolla i link nel messaggio.
✍️ Suggerimenti per la scrittura: utilizza il formato Markdown per strutturare il testo e renderlo più leggibile.
Hi Wesley, I love your The Wrestler based off of Kinnikuman/the 80's toy line M.U.S.C.L.E., I have no 3D skills, can you add a file of the body in a T pose or X pose, after I print them I want to take them apart so I can articulate / put joints in them.
Hello, than k you for reaching out. It would take a lot of time to create this pose in my 3D program, and unfortunately, I do not have the resources for this at the moment.
Hello! I’m from Japan !
I found your Instagram while looking for an Echo Dot Max holder, and I really love the design — it’s so cute that I’d definitely like to get it!
However, I don’t own a 3D printer myself, so I’m considering asking a 3D printing service in Japan to print it for my personal use.
Would that be okay with you?
Thank you very much, and I look forward to your reply!
Hello! Thank you for reaching out. It is okay to use a 3D printing service in Japan to print out the holder design for your personal use, but not for sale.
What would be the final weight of the Droid - Echo Dot (4th Gen) Holder?
Thank you for reaching out. I do not have the final weight of the Droid - Echo Dot Holder.
Hello, I just bought two Alexa Echo Dot Max speakers and am looking for two holders to attach them to the wall. I really like the one you did and I'd like to know if you plan to make for other Echo Dots (I also bought two echo Spot speakers and one echo Studio speaker).
Hello! Please check out my profile page on Cults3d. "Bot Plus One 2.0" is compatible with the Echo Dot 4th and 5th Gen. "Bot_Echo Pop Holder" is compatible with the Echo Pop. There are other designs, too. Enjoy!
Hi Wesley,
What is the overall size of the Mazinger Z when it is assembled?
Thanks.
The Low Poly Mazinger Z total height after assembly is 9.6 inches. The Low Poly Mazinger Z v2 is 10 inches.
Hello Wesley:
I am looking to make trophies for a competition that takes place in December in California.
I think your low-poly model of the California bear is excellent, and I would like to use it as a starting point. Would you be willing to give (or sell) me whatever you have? I am going to produce 3-5 trophies and then never use the model again (until maybe another year). I'm not going to distribute or sell anything.
I have DM'ed you on Instagram as you have requested on other comments here.
Thanks!
Is it for the small or large echo dot?
Hello,
yesterday I purchased the Astronaut file from you where you can place the moon.
Do you have an STL file of a moon that I can download?
I purchased the moon online. It was not 3D printed.
Order number: 113476948
Hello, I would like to request a refund and cancel purchase number: 113476948. I was looking for a file to cut out and mount on paper and in a search on pinterest I came across the site DeepL. Due to the language barrier, I didn't realize it was for a 3D printer, an area in which I don't master or know anything about. It wasn't until I downloaded it that I realized I didn't recognize the file extension, that it wasn't PDF and that I'd never seen it before.
This file is of no use to me, as I don't have a printer and I was looking for a papercraft that I could cut out and assemble with my nephew. Can you help me with the cancellation?
Sincerely,
Sidicléia dos Santos.
Translated with DeepL.com (free version)
Hello. I have a client wanting to print your California Bear design and display it in their store, and I see your license doesn't allow this, but it says communicate with you on these matters. Is there anything we can do to make this ok?
Hello. Please send me a DM on my Instagram @wesleymillora to discuss this matter. Thank you.
I Dmd you on instagram.
On your r2d2 for echo dot 5th and 4th gen, I don't want to add the head deco because I have the echo dot 5th gen with clock. Although, I think it would be cool to have a little hat that I could put on top of the echo dot that left room for the clock and the buttons on the top, adding to the r2d2 feel instead of a stand for echo dot. Would you mind making that?
I love your models. I already printed the r2d2 and am loving it. If you don't want to model that, I am happy to model it myself and send the file to you for sharing :)
Thank you for your message. Unfortunately, I do not have the bandwidth to 3D model the "little hat" part you described. I like your idea to 3D model it yourself. I think it will be a good, short project that will make your droid more special (and unique). You don't need to send me the file but if you can, please share a photo of your design. Cheers!
can you upload the model you used for the model of the echo dot? I am trying to model the "little hat" (that was a bad description i gave, more like the top part of r2d2) but I need a model of the echo dot to model it around.
Before I upload the Echo Dot model, please let me know which version did you Droad 3D model did you purchase. Also, when did you purchase the download? I looked through my sales history and I did not see 'spycodr77' on list. Thanks!
Bot Plus Plus is compatible with Amazon Echo (4th Gen). this is for the full size not the dot right?
This one is compatible with Amazon Echo (the larger version) - https://cults3d.com/en/3d-model/home/robot-x-amazon-echo-4th-gen
ty very much
Good evening! I regretted my purchase! I thought it would be R$3.00 for the project, not R$25.00. I'm not even going to download it and I want the purchase canceled, according to consumer rights.
I will issue a refund if no download has been made. I'm checking with Cults so I am waiting for their reply. Thank you.
Although the Cults team does not have visibility on this download, I will reissue a refund.
your template contains instagram link. i want it to be removed from the template. this is the problem
https://ibb.co/nwyNsSm
https://ibb.co/c2ngRKg
I bought the product to use it, not to advertise on Instagram. I would like a refund.
Cults3d (the platform owner) can offer the refund if there was an issue with your download. Again, sorry you had an issue with your download but it's out of my control.
I MADE THE PURCHASE BUT THE ITEM CONTAINS AN INSTAGRAM LINK. THE ADVERTISEMENT PHOTO DOES NOT MENTION THIS DETAIL. I REQUEST A CORRECTION OR REFUND
This is the first time I have heard of this issue. I suggest contacting the Cults team to resolve this.
Hey is it possible you have the ghost stl for the larger echo, or at least know the upscale % to make it fit
Hi, regarding your low poly California Grizzly, do you do customizations?
Hi, I do not do customizations.
Hi again, I printed the v2 legs for the Droid-Echo Dot (4th Gen) Holder, left and right stl files, but I just can't tell the difference as they look identical. Of course, I have now mixed them up so I don't know which is left and right!
Is there some subtle difference I can find to tell me? And can I assume left and right are from the droids point of view?
Thanks :)
It’s been a long time since I uploaded this design. If there is a difference, I think it’s around the top of the legs where it attaches to the body. If you don’t see any noticeable difference, the two legs are identical.
Thanks for your reply, I couldn't see a difference and they both fit well :)
Hi, I bought your Echo Dot 4th gen design and mistakenly thought it would fit gen 5 as I spotted gen 5 in the 12/09/2022 update, but didn't read properly! Are there big differences or can it fit the gen 5 with some adjustment? I'm half way through the print and considering abandoning it if it won't fit a gen 5.
Thanks :)
Sorry, it's the Droid-Echo Dot (4th Gen) Holder :)
I’m not exactly sure but I think you should be able to fit the Echo Dot 5th Gen into 3D print (for the 4th Gen). You may need make the opening at the back slightly larger using a sandpaper or dremel.
Hi and thanks for your reply. Ok I'll try what you suggest. What I have printed so far looks fantastic, you've done a great job! :)
for r2-d2 echo dot 5 how much material would be needed?
Hey Sir, could you kindly let me know what to do with the 2 files Reference-Foot.stl and Reference-Hand.stl from the Echo 4 design? I can't figure where you intended to put those? Thanks!
Disregard these files - they are for reference only.
hello a question
the mazinger z, do all the pieces fit together in the laminator? i am interested in printing it in only one piece.
Hello. Sorry but I never heard of a “laminator” in 3D printing.
my translation was bad, sorry
what I mean is that if I import all the parts in cure
select all the parts so that everything is put together
I want it to be only 1 piece
thanks for your answer
I'm sorry but I do not have a version of it in one piece and I do not plan on making this version.
just printed your low poly daredevil and spiderman and am in love! Id love it if you made more characters! maybe some xmen?
why cant i put the ball joint in to blender?
I have no idea. I do not have experience with Blender.